EN
Linear logo
Official user manual

Linear CCM-2A

1 pages·279 KB·Home Security System·PDF·ENDEFRITNLJA
Linear CCM-2A
Table of Contents 28 sections WITH THE TWO RETAINING · SECURE THE CAMERA · 1. REMOVE THE COVER PLATE · PRODUCT DESCRIPTION · … ShowHide
Page 1 of the Linear CCM-2A user manual — CONNECTOR
Page 1 · click to enlarge
Page 1

WITH THE TWO RETAINING

SECURE THE CAMERA

CCM-2A Color Camera Module Installation Instructions USA & Canada (800) 421-1587 & (800) 392-0123 (760) 438-7000 - Toll Free FAX (800) 468-1340 www.linearcorp.comPRODUCT DESCRIPTION1. REMOVE THE COVER PLATE Linear’s Model CCM-2A (P/N ACP00936A) CCTV camera can be installed inside the RE-2 Residential Telephone Entry System. The camera provides a video signal for viewing the area in front of the entry system. The camera is continuously powered by the RE-2. Focus has been factory adjusted to a range of three to four feet. No adjustment is needed. The CAMERA connector is used to connect the camera to the RE-2. The 3-conductor cable routes power to, and video from the camera. The RE-2 provides a video jack for connection to a video cable with a Type “BNC” connector. Up to 400 feet of 75-ohm RG-59 video cable can be used. Longer cable runs may require the use of a video amplifi er. NOTE: If camera is being installed on an existing installation, system power should be off prior to installing the camera.REMOVE THE FOUR SECURITY SCREWS TO OPEN THE CASE 2. PREPARE TO MOUNT THE CAMERA3. REMOVE THE LENS CAP4. INSTALL THE CAMERA REMOVE THE SIX CIRCUIT BOARD RETAINING SCREWS AND FLIP THE CIRCUIT BOARD UP REMOVE THE TWO RETAINING SCREWS AND BRACKETS CAMERA MOUNTING AREA REMOVE THE BLACK DOT ON CAMERA GASKETREMOVE THE LENS CAP FROM THE CAMERA LENSSECURE THE CAMERA PLASTIC WITH THE TWO RETAINING CAMERA BRACKETS AND SCREWS GASKET 5. CONNECT THE CAMERA AND VIDEO CABLE6. TEST CAMERALINEAR LIMITED WARRANTY

1. REMOVE THE COVER PLATE

Linear’s Model CCM-2A (P/N ACP00936A) CCTV camera can be installed inside the

RE-2 Residential Telephone Entry System. The camera provides a video signal for

PRODUCT DESCRIPTION

REMOVE THE

ON CAMERA

THE RE-2'S VIDEO OUTPUT CONNECTOR CONNECT THE CAMERA'S

BLACK DOT

GASKET

CONNECT THE VIDEO CABLE FROM

THE MONITOR OR MODULATOR TO

REMOVE THE TWO RETAINING

SCREWS AND BRACKETS

AND FLIP THE CIRCUIT BOARD UP

BOARD RETAINING SCREWS

REMOVE THE SIX CIRCUIT

USA & Canada (800) 421-1587 & (800) 392-0123

(760) 438-7000 - Toll Free FAX (800) 468-1340

www.linearcorp.com

Installation Instructions

CONNECTOR

CONNECTOR VIDEO

OUTPUT

CCM-2A

MOUNTING

CAMERA

CABLE TO THE RE-2'S

CAMERA CONNECTOR

AREA

CAMERA

Camera

Module

Color

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Linear CCM-2A

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Linear CCM-2A

Be the first to ask — other owners or our team will answer.

Original document

Linear CCM-2A manual PDF

1 pages·279 KB·Home Security System·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…