Instruction/ maintenance manual of the product MSDU Frymaster
Go to page of 12
Frymaster L.L.C., 8700 Line Avenu e 71106, 5489 Campus Drive 7 1129 P.O. Box 51000, Shrevepo rt, Louisiana 71135-1000 PHONE 318-865-1711 FAX 318-219- 7135 PRINTED IN THE UNI TED S TATE S SERVICE HOTLINE 1-800-24-FRYER SEPTEMBER 2005 www.frymaster.com E- mail: service@frymaster.
ii NOTICE IF, DURING THE WARRANTY PERIOD, THE CUS TOMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED P ART PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BE ING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID.
VEGETABLE OIL DISPOSAL UNIT (MSDU) INSTALLATION, OPERATION, SERVICE, AND PARTS 1 1. INTRODUCTION 1.1 Service Information and Parts Ordering Included with the unit when shipped from the factory is a list of Factory Au thorized Service Cen ters (FASCs).
2 manuals, and to stock a minimum amount of parts for F rymaster equipment. A list of Factory Authorized Service Centers (FAS Cs) was included with this equipment when shipped from the factory. Unless specifically indica ted ot herwise in this manual, failure to use q ualified service personnel will void the Frymaster Warranty on this equipment.
3 transferring the oil to a disposal container. It is equipped with 7" (178 mm) wheels and a foldable handle. The pump is mounted at a convenient height that allows it to be opera ted from a standing position. The height of the discharge pipe allows pumping directly into a standard 55-gallon drum.
4 DANGER Before each use inspect the cover to ensure the cover gasket is present and properly placed. DO NOT use the disposal unit if this gasket is damaged or missing. 3. Slowly open the drain valve. Regulate flow w ith the drain valve to prevent splashing.
5 2.4 Cleaning Clean the crumb screen with a solution of detergent and water. Clean the exterior surfaces of the MSDU with a soft cloth and a solution of detergent and water. It is not necessary to clean the interior of the reservoir, but if desired it may be wiped down with clean paper towels to remove excess residual oil.
6 3. Grasp the pump shaft and carefu lly pull the rotor assembly stra ight out of the pump housing far enough to expose the vanes. IMPORTANT: The vanes are spring-loaded. Use one hand to hold the vanes while pulling the rotor assembly the rest of the way out of the housing.
7 THIS PAGE INTENTIONALLY LEFT BLANK..
8 4. PARTS LIST 5 17 22 23 9 1 2 3 4 6 7 8 10 12 13 11 14 15 16 20 21 25 26 27 18 28 19 24 Note: See page 6 for MSDU pump assembly components..
9 ITEM PART # COMPONENT 1 Pipe Assembly, Discharge 823-4600 Standard (includes Item 2) 823-4598 For use with Item 4 (Hose Discharge) (includes Ite m 3) 2 813-0115 Nipple, ¾-inch x 3-inch Toe 3 813-00.
Frymaster, L.L.C., 8700 Line Av enue, PO Box 51 000, Shreveport, Louisiana 71135-1000 Shipping Address: 8700 Line Av enue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318- 688-2200 FA.
An important point after buying a device Frymaster MSDU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frymaster MSDU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frymaster MSDU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frymaster MSDU you will learn all the available features of the product, as well as information on its operation. The information that you get Frymaster MSDU will certainly help you make a decision on the purchase.
If you already are a holder of Frymaster MSDU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frymaster MSDU.
However, one of the most important roles played by the user manual is to help in solving problems with Frymaster MSDU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frymaster MSDU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
