Instruction/ maintenance manual of the product WLTL421010 Weslo
Go to page of 22
Serial Number Decal Model No. WLTL421040 Serial No. CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if there are missing parts, we will guar- antee complete satisfaction through direct assistance from our factory.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 22. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. Never drop or insert any object into any opening. 24. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual.
5 Thank you for selecting the WESLO ® CARDIO PACER TM treadmill. The CARDIO PACER treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardi ovascula r ex- ercise in the convenience and privacy of your home.
15 15 28 29 29 24 24 24 24 12 12 19 19 19 19 1 1. Make sure that the power cord is unplugged. Orient the Base (28) so the holes for the four Base Pads (19) are on top. Open part bag A. Attach the four Base Pads to the Base with the four 3/4" Tek Screws (24).
7 3. Raise the Uprights (6, 17) to the vertical position. Place the Frame (55) between the Uprights as shown. Feed the Wire Harness (22) into the large round hole in the lower end of the Right Upright (6) and out of the indi- cated hole. Note: It may be helpful to use needlenose pli- ers to pull the end of the Wire Harness out of the hole.
8 5. Hold a Handrail (32) near the Right Upright (6). Feed the Wire Harness (22) into the hole near the lower end of the Handrail and out of the hole near the upper end of the Handrail. Note: It may be helpful to use needlenose pliers to pull the end of the Wire Harness out of the hole.
58 17 Knob Spring Collar Pin 10. Press the Latch Housing (58) into the Left Upright (17). Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown. Insert the pin into the Latch Housing, and tighten the knob back onto the pin.
10 OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 DIAGRAM OF THE CONSOLE Clip Key Speed Control Monitor Displays with the nega tive (–) ends of the batteries touching the springs. Close the battery cover, push up on the tab, and then push the tab forward as shown. Make sure that the tab locks into place.
12 Insert the key fully into the console. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If batteries were just installed, the displays will already be on.
13 HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, you can change the incline of the treadmill. There are four incline lev- els. Before changing the incline, remove the key and UNPLUG THE POWER CORD. Next, fold the treadmill to the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 14).
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.
16 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-866-699-3756, Monday through Friday, 6 a.
17 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
19 WORKOUT GUIDELINES Each workout should include the following three parts: A Warm-up Start each workout with 5 to 10 minutes of stretching and light exercise. A proper warm-up increases your body temperature, heart rate, and circulation in prepa- ration for exercise.
P ART LIST—Model No. WL TL421040 R0904A Key No. Qty. Description 1 1 Console 2 1 Speed Control 3 1 Key/Clip 4 1 Choke 5 6 Electronics Screw 6 1 Right Upright 7 13 3/4" Screw 8 1 Battery Cover 9 1 Motor Tension Bolt 10 2 6 1/2" Bolt 11 2 1-lb.
16 10 22 10 13 28 24 19 29 12 12 15 29 64 15 30 30 64 1 1 69 14 3 19 24 24 19 19 24 17 42 6 42 18 22 63 63 7 7 7 7 7 8 1 2 80 79* 12 42 12 42 37 58 37 78* 32 32 20 20 71 21 21 21 27 74 24 51 66 67 24 .
Part No. 218358 R0904A Printed in USA © 2004 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-866-699-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
An important point after buying a device Weslo WLTL421010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WLTL421010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WLTL421010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WLTL421010 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WLTL421010 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WLTL421010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WLTL421010.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WLTL421010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WLTL421010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
