Instruction/ maintenance manual of the product 30513.0 ProForm
Go to page of 30
Model No. 30513.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are com - mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2 m (8 ft.) of clearance behind it and 0.
4 22. Never insert any object into any opening. 23. DANGER: Always unplug the power c ord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures de- s cribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative.
5 T hank you for selecting the new PROFORM ® 5 25s C ROSSWALK ADVANCED treadmill. The CROSS- WALK ADVANCED treadmill combines advanced tech- nology with innovative design to help you get the most from your exercise in the convenience of your home.
6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 4. Identify the Right Handrail (72), which has a large hole in the left side. Feed the Upright Wire (42) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole.
8 Small Hole 71 5. Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base t o the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wire 5 40 40 100 6. Set the Console Base (47) on the Left and Right Handrails (71, 72).
9 42 8. Touch the Right Handrail (72) to discharge any static. Insert the end of the Upright Wire (42) into the socket in the b ottom of the Console Base (47). T he connector should slide easily into the socket and snap into place. If the c onnector does not slide easily and snap into place, turn the connector and then insert it.
10 12. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 25). To protect the floor or carpet, place a mat under the treadmill.
1 1 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 12 FEATURES OF THE CONSOLE The console offers a selection of features designed to help you get the most from your exercise. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
13 HOW TO TURN ON THE POWER Plug in the power cord (see page 11). Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 12), and slide the clip onto the waistband of yo ur cloth es. Next, insert the key into the con- sole.
14 Time display —When the manual mode or the i FIT.com mode is se- lected, this display will s how the elapsed time. When a speed program is selected, the display will show the time remain- ing in the program.
15 Press the Start button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed set- t ing fo r the p rogram . Hold the handrails and begin walking. Each program is divided into several time periods of different lengths.
16 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be connected t o your portable CD player, portable stereo, home s tereo, or computer with CD player. See pages 16 and 17 for connecting instructions.
17 HOW TO CONNECT YOUR HOME STEREO N ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b eing used, see instruction B. A. Plug one end of the audio cable into the jack be- neath the console. Plug the other end of the cable into the included adapter.
18 HOW TO CONNECT YOUR VCR N ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is b eing used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 17.
19 HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS To use iFIT.com CDs or videocassettes, the treadmill m ust be connected to your portable CD player, portable s tereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO YOUR C D PLAYER, VCR, OR COMPUTER on page 16.
20 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access programs directly from the internet. See w ww.iFIT. com for details. Note: Programs will control only the speed of your treadmill. To use programs from our Web site, the treadmill must be connected to your home computer.
21 THE INFORMATION MODE T he console features an information mode that keeps track of the total number of hours that the treadmill has b een operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour.
22 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.
23 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor.
24 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- f ree at 1-888-936-4266, Mon.
25 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 11. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
26 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
27 ORDERING REPLACEMENT P ARTS T o order replacement parts, call our Customer Service Department toll-free at 1-888-936-4266, Mon.–Fri. 8h00 until 17h00 EST (excluding holidays). Before calling, please note the following information: • the MODEL NUMBER of the product (30513.
P ART LIST—Model No. 30513.0 R1205A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 24 3/4” Screw 3 1 Motor Belt 4 1 Motor Tension Bolt 5 1 3/8” Washer 6.
EXPLODED DRA WING—Model No. 30513.0 R1205A 72 25 2 2 2 31 48 48 54 25 2 2 30513.1 28 10 49 12 19 13 13 60 58 13 12 14 21 16 18 17 14 15 74 16 82 83 97 15 96 86 15 95 92 38 92 38 93 81 49 83 82 49 79.
Part No. 234696 R1205A Printed in Canada © 2005 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire treadmill (“Product”) is warranted to be free of all defects in material and workman- s hip. W HO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
An important point after buying a device ProForm 30513.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm 30513.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm 30513.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm 30513.0 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm 30513.0 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm 30513.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm 30513.0.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm 30513.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm 30513.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
