Instruction/ maintenance manual of the product WLTL29014 Weslo
Go to page of 18
Model No. WLTL29014 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, we will guaran- tee complete satisfaction through direct assistance from our factory.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............................................................. 2 BEFORE YOU BEGIN ................................................................... 4 ASSEMBLY ...................................................
14. Never move the walkingbelt while the power must be able to safely lift 45 pounds (20 kg) in is turned off. Do not operate the treadmill if order to raise, lower, or move the treadmill. the power cord or plug is damaged, or if the treadmill is not working properly.
BEFORE YOU BEGIN Thank you for selecting the WESLO ® CADENCE 340 CS treadmill. The CADENCE 340 CS combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis- pose of the packing materials until assembly is completed. In addition to the included allen wrench, assembly requires a phillips screwdriver , an adjustable wrench ©_ and scissors _- --_.
3. Hold the Console Base (87) near the right Handrail (4). Make a loop with the indicated plastic tie,and insert the two Wires (53) through the loop. Pull out just enough of the Wires to connect them to the two connectors in the Console Base (87). Plug the red connector into the corre- sponding connector in the Console Base.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
DIAGRAM OF THE CONSOLE Monitor Displays STEP BY STEP INSTRUCTIONS I _,_ INSERTKEY [ [ _-s ON/RESET [ BUTTON [ E SET TO DESIRED LEVEL SPEED TRAINING ZONES ,)LLJ VV RESET Speed Control _ If there is a thin sheet of clear plastic on the console, remove it.
_ Insert the key fully into the power switch. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
HANDRAIL HEIGHT ADJUSTMENT The Handrails (4, 88) can be adjusted to either of two heights. Before adjusting the Handrails, remove the key and unplug the power cord. Remove the four Console Screws (3). While a second person lifts the Console Base (87), remove the Handrail Bolts (1), Handrail Washers (80), and Handrail Star Washers (2).
HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is locked fully over the catch. 1. Remove the weights from the weight racks. 2. Hold the upper ends of the handrails.
MAINTENANCE AND TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 7. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged.
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. The following guidelines will help you to plan your exercise program.
WORKOUT GUIDELINES zone for longer than 20 minutes.) Breathe regularly anddeeply as you exercise--never hold your breath. Each workout should include the following three parts: A Warm-up Start each workout with 5 to 10 minutes of stretching and light exercise.
PART LIST--Model No. WLTL29014 R0903A Key No. Qty. Description Key No. Qty. Description 1 4 Handrail Bolt 48 1 Motor Tension Nut 2 4 Handrail Star Washer 49 2 Upright Endcap 3 4 Console Screw 50 1 Right Foot Rail 4 1 Right Handrail 51 4 Platform Screw 5 8 Console Insert Screw 52 1 Front Roller Adj.
30 28 i i ' 4O 78 82 _ 77 . /-/ ,, 28 i 36 37 [ 28 ® 65 I5 23 81 18 1 50 67 71 3 5'8 _ 69 73 57 49 < 38 5 53 4 : 35 --... ---..... "--- ' h , I'll X I" 0 0 Z 0 q I&.
ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.
An important point after buying a device Weslo WLTL29014 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WLTL29014 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WLTL29014 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WLTL29014 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WLTL29014 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WLTL29014, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WLTL29014.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WLTL29014. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WLTL29014 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
