Instruction/ maintenance manual of the product WLTL21130 Weslo
Go to page of 22
Model No. WL TL21 130 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal Visit our website at www .
2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 22. Never drop or insert any object into any opening. 23. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative.
5 BEFORE YOU BEGIN Handrails Console Latch Knob Key/Clip Circuit Breaker W alking Belt Foot Rails Incline Leg Incline Pin Power Cord FRONT RIGHT SIDE BACK Rear Roller Adjustment Bolts W ater Bottle Holder (No bottle is included) Upright Thank you for selecting the WESLO CADENCE ® CR12 treadmill.
6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 3. With the help of a second person, tip the treadmill so the Base Pads (33) (see drawing 1) are lying flat on the floor . Raise the Uprights (14, 15) to the vertical position. Hold a Handrail Spacer (3) so the arrow between the two large holes is pointing upward.
8 6. Hold the Console (1 1) near the Console Base (87). T ouch the right Handrail (4) to discharge any static. Locate the two wires in the Wire Harness (53) that have L-shaped connectors on the ends. Press the connectors onto the two tabs on the switch shown in inset drawing 6a.
9 9. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep the included allen wrenches in a secure place for adjustment purposes (see page 16). T o protect the floor or carpet, place a mat under the treadmill.
10 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM W ALKING BEL T Y our treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORT ANT : Never apply silicone spray or other substances to the walking belt or the walking plat- form.
11 CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power . • Always wear the clip (see the drawing below) while using the treadmill. When the key is removed from the console, the walking belt will stop.
12 Follow the steps below to operate the console. Insert the key fully into the console. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
13 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.
15 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday , 6 a.
16 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged.
17 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
18 T raining Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
19 NOTES.
P ART LIST—Model No. WL TL21 130 R0903A 1 8 3” Bolt 2 2 Upright Lock Bracket 3 2 Handrail Spacer 4 2 Handrail 5 16 3/4” Screw 6 1 Key/Clip 7 1 Frame Guide 8 2 Incline Leg 9 2 1 1/4” T ek Screw.
28 30 45 28 28 94 53 6 63 75 70 51 51 40 52 19 76 69 68 70 67 50 60 95 81 79 78 40 76 77 83 37 27 43 43 84 76 35 38 49 53 76 28 29 28 28 28 5 87 12 5 11 64 64 82 7 16 41 42 22 18 22 23* 26 25 24 19 20.
Part No. 201656 R0903A Printed in USA © 2003 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays).
An important point after buying a device Weslo WLTL21130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WLTL21130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WLTL21130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WLTL21130 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WLTL21130 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WLTL21130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WLTL21130.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WLTL21130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WLTL21130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
