Instruction/ maintenance manual of the product WCTL39100 Weslo
Go to page of 16
USER'S MANUAL Model No. WCTL39100 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfac- tion through direct assis tance from our factory.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 9. Use only a CUL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. Do not use an extension cord. 10. Keep the power cord and the surge protector away from heated surfaces. 11. Never move the walking belt while the power is turned off.
Handrails Console Pulse Sensor Key/Clip Motor Hood Upright Circuit Breaker Incline Pin Walking Belt Roller Guards Foot Rail Power Cord Speed Control Towel Rack Rear Roller Adjustment Bolt FRONT BACK RIGHT SIDE BEFORE YOU BEGIN Thank you for selecting the WESLO CADENCE ® 391 treadmill.
5 1. Raise the Upright (11) to the vertical position. Insert the 3/8” x 1” Bolt (18) and the 3/8” x 1 1/2” Washer (28) into the lower end of the Upright. Finger tighten the Bolt into the Frame (59). 2. Hold the upper end of the Right Handrail (10) under the Console (3).
The instructions on pages 7 to 9 of this manual explain the operation and adjustment of the treadmill. For maxi- mum treadmill performance, it is important to maintain proper form when walking on the treadmill. The drawing below demonstrates the proper form.
OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
8 STEP BY STEP CONSOLE OPERATION Make sure that the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 7). Next, step onto the foot rails of the treadmill. Find the clip attached to the key (see the drawing above). Slide the clip onto your waistband.
9 the walking belt, slide the speed control to the "RESET" position. Press the MODE button to select the desired monitor mode. The monitor offers five different modes to provide instant exercise feedback: SPEED— displays your speed, in miles per hour.
TROUBLE-SHOOTING AND ST ORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies to your treadmill and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-free at 1-888-936-4266, Monday through Friday, 8 a.
11 5. SYMPTOM: THE WALKING BELT IS OFF-CENTER a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD . Using the allen wrench, turn the rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few min- utes.
CONDITIONING GUIDELINES The following guidelines will help you to plan your exer- cise program. Remember—these are general guide- lines. For more detailed information about exercise, obtain a reputable book or consult your physician.
13 Training Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
P ART LIST—Model No. WCTL39100 R0900A Key No. Qty. Description 1 1 Left Handrail 2 2 3/8” x 1 3/4” Bolt 3* 1 Console 4 1 Upright Wire Harness 5 2 Console Cage Nut 6 5 Console Screw 7 1 Pot Wire .
EXPLODED DRA WING—Model No. WCTL39100 R0900A 74 41 61 12 41 78 55 54 27 32 13 28 18 2 51 9 70 70 30 31 35 33 40 39 42 82 43 76 22 46 45 59 68 63 70 71 49 67 69 75 53 65 64 26 11 48 1 25 66 41 24 23 .
Part No. 167312 R0900A Printed in Canada © 2000 ICON Health & Fitness, Inc. WESLO is a registered trademark of ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-888-936-4266 , Monday through Friday, 8 a.
An important point after buying a device Weslo WCTL39100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WCTL39100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WCTL39100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WCTL39100 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WCTL39100 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WCTL39100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WCTL39100.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WCTL39100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WCTL39100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
