Instruction/ maintenance manual of the product WATL27205.1 Weslo
Go to page of 23
USER'S MANUAL Serial Number Decal Model No. WATL27205.1 Serial No. CAUTION Read all precautions and in- structions in this manual before using this equipment.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 f t.
4 178425 V ertical Latch W arning Decal, T readmill A warning decal in Chinese has been placed on the treadmill in the location shown at the right. An English decal with the same information is included. If desired, apply the English decal on top of the Chinese decal.
5 T hank you for selecting the new WESLO ® E -30 tread- m ill. The E-30 treadmill offers an impressive array of features designed to help you achieve your fitness goals in the convenience and privacy of y our h ome.
ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. N ote: The und ersi de o f th e tre admi ll w alki ng b elt is coated with high-performance lubricant.
7 5. Identify the Right Handrail (40), which has a pulse bar bracket on its left side. Feed the Wire Harness (65) up into the large bracket on the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole.
Tie 8. Insert the Wire Harness (65) through the indicated nylon tie on the Console Base (67). Next, touch the Right Handrail (40) to discharge any static. See drawing 8a. Insert the connector on the end of the Wire Harness into the red socket beneath the Console (69).
9 12. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be in- cluded. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 18). To protect the floor or carpet, place a mat under the treadmill.
10 OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- r ate the walking belt and cause excessive wear.
1 1 ETWA27205 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
12 HOW TO TURN ON THE POWER P lug in the power cord (see page 11). Next, locate t he on/off switch on the right side of the treadmill frame near the right up- right. Make sure that the switch is in the “on” position. Next, stand on the foot rails of the treadmill.
13 Incline display —This display shows the in- c line level of the tread- mill. Time/Pace display — When the manual mode is selected, this display will show the elapsed time and your pace (pace is mea- sured in minutes per mile or minutes per kilometer).
14 Listen to your favorite FM radio station if desired. Press the Power button to turn on the radio. Next, press the Tune buttons to select the desired FM r adio station. Then, press the Volume buttons to adjust the volume of the speakers. Note: A pair of headphones (not included) can be plugged into the headphone jack.
15 When only three seconds remain in the first seg- ment of the program, both the Current Segment c olumn and the column to the right will flash, and a series of tones will sound. If the speed and/or in- c line of the treadmill is about to change, the Incline display and/or the Speed display will flash to alert you.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.
17 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
18 Locate the Reed Switch (16) and the Magnet (10) on the left side of the Pulley (101). Turn the Pulley until t he Magnet is aligned with the Reed Switch.
19 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
Wheel Nut (64)–2 1” Bolt (43)–4 Silver Ground Screw (66)–1 3/4” Screw (38)–9 1/4” W asher (44)–4 1/4” Star W asher (45)–4 3/8” Star W asher (55)–2 3” Bolt (58)–4 4” Handr.
P ART LIST—Model No. W A TL27205.1 R1105A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 4 #8 Washer 3 2 Foot Rail 4 2 Belt Guide 5 4 1/2” Screw 6 4 Isola.
89 43 44 45 43 45 44 47 38 67 53 54 55 57 58 79 61 64 74 60 65 73 20 27 77 62 58 57 74 55 54 64 61 63 73 60 43 38 45 44 45 44 43 71 38 69 68 38 38 38 84 104 27 85 87 70 38 12 12 72 46 102 78 78 65 38 .
Part No. 232942 R1105A Printed in Canada © 2005 ICON IP, Inc. LIMITED W ARRANTY Shanghai Newlife Fitness Equipment, Inc. (Newlife), warrants this product to be free from defects in work - manship and material under normal use and service conditions. The drive motor is warranted for five (5) ye ar s after the date of purchase.
An important point after buying a device Weslo WATL27205.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WATL27205.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WATL27205.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WATL27205.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WATL27205.1 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WATL27205.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WATL27205.1.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WATL27205.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WATL27205.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
