Instruction/ maintenance manual of the product WATL13906.0 Weslo
Go to page of 23
USER'S MANUAL Serial Number Decal Model No. WATL13906.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if any parts are missing or damaged, PLEASE CONTACT OUR CUS - TOM ER SERVICE DEPARTMENT DIRECTLY.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the f ollowing important precautions and information before operating the treadmill. IMPORT ANT PRECAUTIONS 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions.
4 The decal shown at the right has been placed on the treadmill. If the decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.
5 Thank you for selecting the new WESLO ® CADENCE S5 treadmill. The CADENCE S5 treadmill combines advanced technology with innovative design to make your workouts at home more effective and enjoyable. A nd when you’re not exercising, the CADENCE S5 tread mill can be folded up, requiring less than half the floor space of other treadmills.
6 ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials; d o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 3. With the help of a second person, ra is e t he Up rig hts (53, 54) so the Base (52) is flat on the floor as shown. N ext, position the front of the treadmill Frame (51) between the Uprights. See the inset drawing. Locate the wire inside of the lower end of the Right Upright (54).
8 6. Hold the Console Assembly (91) near the Right Upright (54). Touch the Right Handrail to discharge any static. Insert the end of the Wire Harness (98) into the hole in the bottom of the Right Handrail (55) and out of the large hole in the side. Next, Insert the end of the Wire Harness through the two looped plastic ties.
9 9. Carefully lower the Handrails (55, 56) to the floor. Center the Frame (51) between the Handrails, and tighten the four Upright Bolts (2). Then, raise the Handrails back to the vertical position. See the inset drawing. A ttach the Latch Assembly (108) to the Left Upright (53) with two Latch Screws (7).
10 OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- r ate the walking belt and cause excessive wear.
1 1 ETWE13906 WETL13906 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. While the manual mode of the console is selected, the speed of the treadmill can be changed with the touch o fa button.
H OW TO USE THE MANUAL MODE Insert the key into the console. See HOW TO TURN ON THE POWER on page 1 1. Select the manual mode. When the key is in- serted, the manual mode will be selected. If you have selected a speed program, rese- lect the manual mode by pressing the Program Select button repeatedly until only zeros appear in the displays.
13 Measure your heart rate if desired. Before using the hand- grip pulse sensor, re- move the sheets of c lear plastic from the metal contacts. In addi- tion, make sure that your hands are clean. To measure your heart rate, stand on the foot rails and hold the metal contacts— avoid mov ing your hands .
14 H OW TO CHANGE THE INCLINE OF THE TREADMILL T o vary the intensity of your exercise, you can change the incline of the treadmill. There are three incline lev- e ls. B efore changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 15).
15 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the t readmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob.
17 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
18 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor, 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
19 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. W A TL13906.0 R0606A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 2 Frame Pivot Bolt 2 4 Upright Bolt 3 4 Handrail Bolt 4 4 Console Screw 5 2 Cro.
Handrail W asher (1 1)–2 Frame Pivot Bolt (1)–2 Upright Bolt (2)–4 Handrail Bolt (3)–4 Console Screw (4)–4 Wheel Housing Bolt (6)–4 Crossbar Screw (5)–2 Latch/Console Back Screw (7)–6 .
80 21 21 103 17 81 100 51 27 101 67 28 105 97 21 83 103 109 54 52 35 70 35 51 65 1 13 1 11 53 14 1 9 45 45 29 98 1 1 11 14 9 63 26 75 3 93 34 38 44 31 79 46 63 26 63 26 26 63 25 21 21 25 25 25 25 29 2.
Part No. 242649 R0606A Printed in China © 2006 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 800-830-7240, or call: When ordering parts, please be prepared to provide the following information: • the MODEL NUMBER of the product (WATL13906.
An important point after buying a device Weslo WATL13906.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WATL13906.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WATL13906.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WATL13906.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WATL13906.0 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WATL13906.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WATL13906.0.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WATL13906.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WATL13906.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
