Instruction/ maintenance manual of the product IMTL 15905.0 Weslo
Go to page of 38
USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. IMTL15905.0 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure t hat all users of this incline trainer are ade- quately informed of all warnings and precau- tions. 2. Use the Incline Trainer only as described. 3. Place the Incline Trainer on a level surface, with at least eight feet of clearance behind it and two feet on each side.
2 1. Do not change the incline of the Incline Trainer by placing objects under the Incline Trainer. 2 2. Use the upper body handles only at walking s peeds. Using the handles and not holding the handrails may compromise your ability to maintain your balance.
Thank you for selecting the revolutionary IMAGE ® A DVANCED 3000 Incline Trainer. The ADVANCED 3000 Incline Trainer offers a selection of features de- signed to make your workouts at home more enjoyable and e ffect ive. And when you’re not exercising, the u nique ADVANCED 3000 Incline Trainer can be folded up, requiring less floor space.
ASSEMBL Y T o hire an authorized service technician to assemble the Incline Trainer, call toll-free 1-800-445-2480. Assembly requires two persons. Set the Incline Trainer in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
7 2. Insert a Handrail (67) into the Upper Handrail (68) as shown. The lower end of the Handrail should sit on the B ase Hood (105) as shown. (Note: It may be necessary to twist the Handrail as you insert it. It may also be neces- s ary to loosen the two Screws [3] several turns.
8 6. Attach the Upright Base Pad (103) and the six Base Pads (93) to the bottom of the Upright Base (96) with ten 3/4” Tek Screws (94) as shown. 94 94 94 103 93 94 96 93 94 94 94 94 93 93 93 93 6 5. With the help of a second person, carefully tip the Upright Base (96) to the position shown.
9 8. Fold the Incline Trainer to the storage position (see HOW TO FOLD THE INCLINE TRAINER FOR STORAGE on page 28). Slide the Right Wheel Bracket (59) into the slot in the Right Rear Endcap (57). Align the holes in the Bracket with the holes in the Frame (43).
10 2. Connect the wire on the receiver (A) to the indicated wire extending from the console. Hold the receiver so the small cylinder is oriented as shown and is facing the console. Attach the receiver to the plastic posts on the Access Door (112) with the two included small screws.
1 1 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your incline trainer features a walking belt coated with high-performance lubricant. IMPORTANT: Never a pply silicone spray or other substances to the w alking belt or the walking platform.
12 FEATURES OF THE CONSOLE The advanced console offers an impressive array of features designed to help you get the most from your exercise. When the manual mode of the console is se- lected, the speed and incline of the Incline Trainer can be changed with the touch of a button.
HOW TO TURN ON THE POWER Plug in the power cord. See page 11. Move the reset/off circuit breaker to the reset position. Locate the reset/off cir - cuit breaker on the Incline Trainer near the power cord. Make sure that the circuit breaker is in the reset position.
14 Change the incline of the Incline Trainer as desired. To change the incline of t he Incline Trainer, press the Inclin e in- crease and decrease buttons. Each time a button is pressed, the incline will change by 0.5%. To cha nge the i ncli ne setting quickly, press the 1-step Incline buttons.
15 To reset the displays, press the Stop button, re- move the key, and then reinsert the key. Measure your heart rate if desired. To use the op- tional chest pulse sensor, see the in- structions included with the chest pulse sensor. To use the handgrip pulse sensor, see the instructions below.
16 HOW TO USE A SPEED PROGRAM OR AN INCLINE PROGRAM The console offers 5 speed programs and 10 incline programs. All 15 programs automatically control the speed and the incline of the Incline Trainer as they guide you through effective workouts.
17 The program will continue until the setting for the last segme nt is shown in the Current Segment c olumn and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low at any time during the program, you can manually override the setting by pressing the Speed or Incline buttons.
18 H OW TO CREATE A CUSTOM PROGRAM If desired, you can create your own custom workout p rograms and store them in memory for future use. Up t o four different programs can be stored at the same time. Follow the steps below to create a custom program. Insert the key into the console.
19 H OW TO USE A CUSTOM PROGRAM Follow the steps below to use a custom program. Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. Select one of the custom programs. To select a cus- tom program, press the Speed Programs/ Cu st om button re- peatedly.
20 Turn on the fans if desired. S ee step 7 on page 15. Use the upper body handles if desired. See step 8 on page 15. When you are finished exercising, remove the key.
21 Enter a maximum speed setting. A fter you have entered your age, the letters “SPd” will appear in the F at Calories/ Calories/Pulse display and the maximum speed setting of the program will begin to flash in the Time/Distance display. If desired, press the + and – buttons below the matrix to change the maxi- mum speed setting.
22 HOW TO CONNECT THE INCLINE TRAINER TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the Incline Trainer must be c onnected to your portable CD player, portable stereo, h ome stereo, or computer with CD player. See pages 22 and 23 for connecting instructions.
23 HOW TO CONNECT YOUR HOME STEREO N ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b eing used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the Incline Trainer near the power cord.
24 HOW TO CONNECT YOUR VCR N ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is b eing used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 23.
25 During the CD or video program, an electronic “chir ping” so und will alert you when the speed a nd/or incline of the Incline Trainer is about to change. CAU TION : Always listen for the “chirp” a nd be prepared for speed and /or in cli ne changes.
26 HOW TO USE A PROGRAM DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the Incline Trainer must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 23. In addition, you must have an internet connection and an internet service provider.
27 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of the total number of miles that the walking belt h as moved and the total number of hours that the Incline Trainer has been operated. The information mode also allows you to switch the console from miles to kilometers.
28 HOW T O FOLD AND MOVE THE INCLINE TRAINER HOW TO FOLD THE INCLINE TRAINER FOR STORAGE Before folding the Incline Trainer, adjust the incline to th e lowest position. If this is not done, the Incline Trainer m ay be permanently damaged. Remove the key and unplug the power cord.
29 HOW TO LOWER THE INCLINE TRAINER FOR USE 1. Hold the upper end of the Incline Trainer with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the Incline Trainer down until the frame is past the pin on the latch knob.
TROUBLESHOOTING Most Incline Trainer problems can be solved by following the steps below. Find the symptom that ap- plies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Locate the Reed Switch (20) and the Magnet (8) on the left side of the Pulley (7). Turn the Pulley until the M agnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the Reed S witch is about 1/8”. I f necessary, loosen the Screw (21), move the Reed Switch slightly, and then retighten the Screw.
32 PROBLEM: The incline of the Incline Trainer does not change correctly or does not change when iFIT.com CDs and videocassettes are used SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- m ove the key.
33 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex - ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. IMTL15905.0 R0905A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
Key No. Qty. Description Key No. Qty. Description 103 1 Upright Base Pad 104 2 Incline Motor Bolt, Bottom 105 1 Base Hood 1 06 1 Left Inner Cover 107 1 Bottle Holder 1 08 1 Upright Cover, Back 109 1 P.
16 15 19 21 17 14 120 13 1 1 24 26 20 22 23 1 1 2 10 9 8 12 120 40 25 26 1 1 44 39 42 42 47 48 43 45 46 49 50 51 5 53 13 52 52 54 57 49 56 55 5 51 53 53 54 53 52 59 46 55 52 13 45 42 58 42 41 44 39 9 .
68 64 62 61 60 3 3 67 65 88 60 3 3 67 90 87 3 90 89 87 85 93 96 3 94 3 95 97 98 54 99 3 94 93 13 3 99 54 3 94 98 97 3 3 93 94 94 94 94 94 103 100 13 101 13 104 82 69 83 84 83 82 105 107 108 81 106 73 .
Part No. 234257 R0905A Printed in USA © 2005 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, see the front cover of this manual. When ordering parts, please be prepared to give the following information: • the MODEL NUMBER OF THE PRODUCT (IMTL15905.
An important point after buying a device Weslo IMTL 15905.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo IMTL 15905.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo IMTL 15905.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo IMTL 15905.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo IMTL 15905.0 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo IMTL 15905.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo IMTL 15905.0.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo IMTL 15905.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo IMTL 15905.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
