Instruction/ maintenance manual of the product CADENCE 740 Weslo
Go to page of 16
USER'S MANUAL Model No. WLTL24080 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee you complete sat- isfaction through direct assis- tance from our factory.
2 W ARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with eight feet of clearance behind it.
4 Handrails Console Key/Clip Motor Hood Upright Circuit Breaker Walking Belt Foot Rails Power Cord Speed Control Rear Roller Adjustment Bolt FRONT BACK RIGHT SIDE BEFORE YOU BEGIN Thank you for selecting the WESLO CADENCE ¨ 740 treadmill.
1. Raise the Upright (11) to the vertical position. Insert the 3/8Ó x 1Ó Bolt (18), with the 3/8Ó x 1 1/2Ó Washer (28), into the lower end of the Upright. Finger tighten the Bolt into the Frame (59). 2. Hold the upper end of the Right Handrail (10) under the Console (3).
5. The Console (3) requires two "AA" batteries (not included); alkaline batteries are recommended. To install batteries, first slide off the Battery Cover (58). Remove the battery clip from the Console (3). Press two batteries into the battery clip, with the negative (Ð) ends of the batteries touching the springs.
7 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
8 STEP BY STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in. (See HOW TO PLUG IN THE POWER CORD on page 7). Next, step onto the foot rails of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing.
9 the walking belt, slide the speed control to the "SPEED RESET" position. Press the MODE button to select the desired monitor mode. The monitor offers five different modes to provide instant exercise feedback: ¥ SPEEDÑ displays your speed, in miles per hour.
TROUBLE-SHOOTING AND ST ORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies to your treadmill and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.
5. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD . Using the allen wrench, turn the rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few min- utes.
CONDITIONING GUIDELINES The following guidelines will help you to plan your exer - cise program. RememberÑthese are general guide- lines. For more detailed information about exercise, obtain a reputable book or consult your physician.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
P ART LISTÑModel No. WL TL24080 R0698A 14 Key No. Qty. Description 1 1 Left Handrail 2 2 3/8Ó x 1 3/4Ó Bolt 3* 1 Console 4 1 Long Roller Adjustment Bolt 5 2 Console Cage Nut 6 10 Console Screw/Upri.
EXPLODED DRA WINGÑModel No. WL TL24080 R0698A 41 4 55 54 32 5 28 18 2 53 56 9 6 30 31 35 33 40 39 42 53 43 22 46 45 59 68 63 6 71 49 67 69 8 53 65 64 26 11 48 6 16 14 25 66 41 24 23 34 62 35 41 27 19.
ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756 , Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: ¥ The MODEL NUMBER of the product (WLTL24080).
An important point after buying a device Weslo CADENCE 740 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo CADENCE 740 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo CADENCE 740 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo CADENCE 740 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo CADENCE 740 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo CADENCE 740, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo CADENCE 740.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo CADENCE 740. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo CADENCE 740 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
