Instruction/ maintenance manual of the product 831.29462 Weslo
Go to page of 18
Model No. 831.294620 Serial No. Write the serial number in the space above for future reference, Serial Decal F___-x Ez.t_t (D i .5 E EO u i PM ENT HELPLINE! 1-800-736-6879 SEARS, ROEBUCK AND CO. HOFFMAN ESTATES, IL 60179 USER'S MANUAL www.weslo.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............................................................. 2 BEFORE YOU BEGIN ................................................................... 4 ASSEMBLY ...................................................
The decal shown below has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our toll- free HELPLINE to order a free replacement decal (see the front cover of this manual). Apply the decal in the location shown.
BEFORE YOU BEGIN Congratulations for selecting the new CADENCE" TS 310 treadmill. The TS 310 treadmill combines advanced technology with innovative design to help you get the most from your exercise in the conve- nience and pdvacy of your home.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small parts used in assembly.
3. Cut the plastic tie holding the cage nut in the upper end of the Left Handrail (45). Position the Left Handrail (45) on the left Upright (46). Thread a 114" x 1" Bolt (42) with a Handrail Washer (43) two complete turns into the upper end of the left Upright and the Left Handrail.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
DIAGRAM OF THE CONSOLE |, _p_ ON I p.p._cT l_ J_ CW spEED CON TROL _¢__°EEO T_NING ZONES Speed Control Displays CALS I FAT CALS I SPEED DME I DISTANC_ D ONI,qESET f HEART RATE TRAINING ZONES M, AXF4T_N _4C _ 1_ r_ f_._ TIO e_l ._...J / BATTERY INSTALLATION The console requires two "AA" batteries (not included).
B Insert the key fully into the power switch. Inserting the key will not turn on the dis- plays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
MAINTENANCE AND TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies and follow the steps listed. If further assistance Is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (-IVSS).
CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
EXPLODED DRAWINGmModel NO. 831.294620 R12O_A 54 4 2 27 41 22 21" 23 39 7O 43 27 38 86 49 3 3 66 61 24 67 _ 63 65 70 37.
PART LIST-Model No. 831.294620 R12O1A Key No. Qty. Description Key No. Qty. Description 1 1 Motor Hood 47 1 Magnet 2 11 Screw 48 1 Storage Latch 3 16 3/4" Screw 49 1 Left Endcap 4 5 8" Cable.
SEARS Model No. 831.294620 QUESTIONS? If you find that: • you need help assembling or operating the WESLO CADENCE TS 310 treadmill • a part is missing • or you need to schedule repair service ca.
An important point after buying a device Weslo 831.29462 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo 831.29462 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo 831.29462 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo 831.29462 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo 831.29462 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo 831.29462, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo 831.29462.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo 831.29462. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo 831.29462 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center