Instruction/ maintenance manual of the product VMF1D ML-52539 Vulcan-Hart
Go to page of 12
FORM 30916 (1-95) (Formerly F-114555 & F-114556) VF SERIES ELECTRIC FR YERS MODEL VF1 ML-52913 VMF1 ML-52914 VF2 ML-52915 VMF2 ML-52916 VF90 ML-52917 VFD90 ML-52532 VF1D ML-52538 VMF1D ML-52539 VF2D ML-52542 VMF2D ML-52543 VULCAN-HART COMPANY, P.O.
— 2 — Installation, Operation and Care of MODELS VF1, VMF1, VF2, VMF2, VF1D, VMF1D, VF2D & VMF2D ELECTRIC FR YERS SA VE THESE INSTRUCTIONS FOR FUTURE USE GENERAL Standard features include stai.
— 3 — INST ALLA TION Before installing the fryer, verify that the electrical supply agrees with the specifications on the fryer data plate which is located on the inside of the door panel on floor model fryers and on the lower front cover on countertop models.
— 4 — 1. Bring conduit containing the proper supply wire to the fryer. On VF1/VMF1 and VF1D/VMF1D, bring the conduit in through the clearance hole in the back and terminate on the terminal block housing mounted in the back of the breaker box.
— 5 — OPERA TION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. CONTROLS — MODELS VF1/VMF1 and VF2/VMF2 (Fig's. 1 & 2) Power Switch — Turns electric power to the fryer on or off.
— 6 — PL-40538-1 Fry/Melt Switch Heat Indicator Light High Limit Light Temperature Controller On Indicator Light Power Switch PL-40537-1 Ball Pull Rod Fry/Melt Switch Heat Indicator Light Power Switch High Limit Light Temperature Controller On Indicator Light CONTROLS — MODELS VF1D/VMF1D and VF2D/VMF2D (Fig's.
— 7 — 1. Push power switch to OFF and allow fryer to cool. 2. Remove the fryer basket(s) and support rack (support rack in VF2/VMF2 and VF2D/VMF2D only). 3. Leave the heating elements in the tank (VF1/VMF1 and VF1D/VMF1D). 4. VF1/VMF1 / VF1D/VMF1D: Pour 30-35 pounds of shortening into the fryer tank.
— 8 — FRYING Place the ON-OFF switch to the ON position. The red ON indicator light will come on. Turn thermostat or temperature controller to desired temperature. The amber HEAT indicator light will come on. When the shortening temperature reaches the set temperature, the amber HEAT light will go off.
— 9 — DAILY FILTERING Shortening life will be extended by filtering at least once a day, or more often if conditions warrant. Models VF2/VMF2 and VF2D/VMF2D are equipped with a 1 / 4 turn ball type drain valve.
— 10 — Models VF2/VMF2 and VF2D/VMF2D 1. Turn the fryer off and allow shortening to cool. 2. Slowly remove the baskets to prevent splashing. 3. Open the fryer door and place a metal container of sufficient capacity below the drain pipe. 4. If a filter bag is used, tie it securely to the drain pipe.
— 11 — 2. Close the drain valve (Models VF2/VMF2 and VF2D/VMF2D only). 3. Fill the tank with a non-corrosive, grease-dissolving commercial cleaner, following the manufacturer's instructions. 4. Turn the fryer on and set the thermostat or temperature controller at a temperature recommended by the manufacturer of the commercial cleaner.
— 12 — MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK.
An important point after buying a device Vulcan-Hart VMF1D ML-52539 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart VMF1D ML-52539 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart VMF1D ML-52539 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart VMF1D ML-52539 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart VMF1D ML-52539 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart VMF1D ML-52539, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart VMF1D ML-52539.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart VMF1D ML-52539. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart VMF1D ML-52539 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
