Instruction/ maintenance manual of the product MGF24 Vulcan-Hart
Go to page of 16
FORM 30951 (10-95) (Formerly F-990602) MGF24 MEDIUM DUTY GAS FR YER INST ALLA TION & OPERA TION MANUAL VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL.
— 2 — IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED.
— 3 — T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
— 4 — Installation, Operation and Care of MODEL MGF24 GAS FR YER PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance.
— 5 — When installed, minimum clearance from combustible and non-combustible construction must be 6" at the sides and 6" at the rear. There must be at least 16" clearance between the fryer and any open top flame units. The fryer may be installed on combustible floors.
— 6 — Connect gas supply to the fryer. The gas supply line must be at least the equivalent of 3 / 4 " iron pipe. Make sure the pipes are clean and free of obstructions, dirt, and piping compound.
— 7 — WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THIS PLUG BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
— 8 — Fig. 1.
— 9 — OPERA TION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT OIL CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL OIL FROM THE TANK. CONTROLS Indicating Light — When lit, indicates that thermostat is calling for gas to the burners.
— 10 — ADDING FRYING COMPOUND Fill fry tank to the FULL mark (approximately 30 pounds) with liquid or solid frying compound. Do not overfill. When using solid frying compound, set the thermostat at 200 ° F and allow compound to liquify, then adjust compound level.
— 11 — Clean all stainless steel surfaces with a damp cloth and polish with a soft dry cloth. A non-abrasive cleaner may be used to remove discolorations. Always rub in the direction of the polish lines on the stainless steel to preserve the original finish.
— 12 — 16. Dry thoroughly. Replace the tank and lower the pivotal head. 17. Cover tank until ready for use. 18. Keep burner air shutter openings clean. 19. Keep main burner ports clean. To clean burners, boil them in a strong solution of lye water for 15 minutes.
— 13 — SUGGESTED TIME AND TEMPERA TURE CHART FOR DEEP F A T FR YING Food Temp. ° F Time (minutes) DOUGHNUTS Cake type 375 1 1 / 2 to 2 Yeast raised 375 2 to 2 1 / 2 MEAT Cutlets (less than 1 / 2 .
— 14 — MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT OIL CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL OIL FROM THE TANK. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE.
— 15 — DEEP FR YING TROUBLESHOOTING GUIDE.
— 16 — FORM 30951 (10-95) (Formerly F-990602) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart MGF24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart MGF24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart MGF24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart MGF24 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart MGF24 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart MGF24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart MGF24.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart MGF24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart MGF24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
