Instruction/ maintenance manual of the product VZ-17RTV ViewZ
Go to page of 52
17/19-INCH VALUE TTF -LCD MONITOR INSTRUCT ION MANUA L Please read this manual thoroughly before use, a nd keep it handy for future re ference..
.
SAFETY INSTRUCTION ………………………………………………………………… .. 2 ~ 3 CAUTIONS ……………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… .
Important Safet y Instruction 1. Read these instru ctions. 2. Keep these Instru ctions. 3. Heed all w arnings. 4. Follow al l instructions. 5. Do not use this appa ratus near w ater . 6. Clean only with dry cloth. 7. Do not block any ventilation open ings.
- The apparatus sha ll not be expo sed to drippi ng or splashing and tha t no objects filled with liquids, such as vases, shall be place d no the apparatus .
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
NOTE This e quipment has been tested and f ound to comp ly with the limits for a Class A d igital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation.
A. BOTTOM P A NEL CONTR OL 1. DC 12V IN 2. HDMI IN 3. VGA(D-SUB) IN 4. VIDEO1(AV1) IN 5. VIDEO1(AV1) OUT 6. VIDEO2(AV2) IN 7. VIDEO2(AV2) OUT 8 , 9. AUDIO IN(R+L) for AV1, AV2 10 . PC STEREO IN 11 . TRIGGER INPUT 6 …………………………………………………………………… .
B. REMOTE CONT ROLLER (Option) 1. POWER( ) Turn the power ON or O FF. T here will be a few seconds delay before the displa y appears. 2. SOURCE Select pc or video( AV1/AV2/HDMI /PC) sourc es. 3. AUT O Auto geom etry adjustment in PC Sourc e. 4. HOLD Stop the Trigger & Au to switching functions.
C . FRONT KEY CONTR OL 1. SOURCE/ Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼, ▲ These buttons allow user to move the sub-menu of the a ctiv ated function.
OSD MENU DESC RIPTION A : Custo m Menu (Only Video Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
A : Custo m Menu (For RGB-PC & HD M I Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
B. Picture / Sound Menu (Only Vi deo Input) 1 . Picture Mode 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / Sound. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Picture M ode.
2-1. Color Tone 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Color Tone. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the righ t( ▶ ) or SOURCE / button again. 4) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Color Tone option.
2-2 . Color Tone (User) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e User. 2) Press the M ENU button. 3) Press the up( ▲ ) o r dow n( ▼ ) button to select th e User option. 4) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the Red, G reen or Blue settin g.
3 . Mute 1) Press the up( ▲ ) or dow n( ▼ ) button to select the M ute. 2) Press the righ t( ▶ ) o r SOURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 14 …………………………………………………………………… .
4 . Volume 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Volume 2) Press the le ft ( ◀ ) or right( ▶ ) bu tton to adjust V olume settin g. 3) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
5. Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 16 …………………………………………………………………… .
6. NR (Noise Reduction) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select the NR . 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
7. 3D Comb 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e 3D Comb. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 18 …………………………………………………………………… .
B. Picture / Soun d Menu (For RGB- PC & HDMI Input) 1 . Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the Size opti on.
2 . PC (Only RGB- PC Inpu t ) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PC. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the PC sub menu . 4) Press the right( ▶ ) or S OURCE/ button.
C. PIP Menu 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the PIP. 1. PIP 1) Press the right( ▶ ) or S OURCE/ button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the M ENU button to save.
2. Input Source 1) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Input Source. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Source option.
3. PIP Mode 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode option.
4. PIP Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 24 …………………………………………………………………… .
5. Position 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position option. 4) Press the M ENU button to save. ※ RB: Right of Bottom , LB: Left of Botto m, LT: Left of T op & RT: Rig ht of Top.
6. Swap 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Swap. 2) Press the right( ▶ ) or S OURCE/ button to sw ap the main ima ge for the sub one.
7. Sound Select 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select option. 4) Press the M ENU button to save.
D. Setup Menu 1) Press the M ENU button and then press the up(▲) or down(▼) button to select the Setup . 1. Reset 1) Press the right( ▶ ) or S OURCE/ button 2 ) Press the right( ▶ ) or SOURCE/ button a gain. 3) Press SOURC E/ button to execute the reset.
2. Language 1) Press the up (▲) or dow n(▼) button to select th e Language. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select la nguage. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
3. OSD Tone 1) Press the up (▲) or dow n(▼) button to select th e OSD T one . 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select th e OSD T one option. 4) Press the M ENU button to save. 30 …………………………………………………………………… .
4. Blue Screen 1) Press the up (▲) or dow n(▼) button to select th e Blue Screen. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select the On or Off. 4) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
5. Key Lock 1) Press the up (▲) or dow n(▼) button to select th e Key Lock. 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select the On or Off 4) Press the M ENU button to save. 32 …………………………………………………………………… .
6. Trigger 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger. 2) Press the righ t( ▶ ) or SOURC E/ button. 6-1. Trigger Enable 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Enable. 2) Press the righ t( ▶ ) or SOURC E/ button.
6-2. Trigger Input 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input . 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input option. 4) Press the M enu button to sav e.
6-3. Buzzer 1) Press the up(▲ ) or dow n(▼) button to select th e Buzz er. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select the On or Off. 4) Press the M enu button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
6-4. Trigger Time 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Time . 2) Press left( ◀ ) or right( ▶ ) button to adjust Trigg er Time settin g. 3) Press the M ENU button to sav e. 36 …………………………………………………………………… .
6-5 Trigger Option 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Option. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to sele ct the Trigger Option settin g. 4) Press the M enu button to sav e.
6-6. Display Type 1) P ress the up(▲ ) or dow n(▼) button to select th e Display Type. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Display Type option. 4) Press the M enu button to sav e.
7. Auto switching 1) Press the up(▲ ) or dow n(▼) button to select th e Auto swi tching. 2) Press the righ t( ▶ ) or SOURC E/ button. 7-1. Auto switching On/Off 1) Press the righ t( ▶ ) or SOURC E/ button. 3) Press t he up(▲ ) or dow n(▼) button to select th e On or Off .
7-2. Auto switching Input enabled 1) Press the up(▲ ) or dow n(▼) button to select th e Inputs enabled . 2) Press the right( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Input. 4) Press the righ t( ▶ ) or SOURC E/ button.
7-3. Auto switching Time 1) Press the up(▲ ) or dow n(▼) button to select th e Time . 2) Press the left( ◀ ) or right( ▶ ) button to adjust the Time setting. 3) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
Using the VESA standard wall mount design and the 100 × 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation(Option) 1.
▶ PIN A SSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cord 2.
POWER CONSUMPTION MODE POWER CONSUMPTION 17 ” 19 ” ON < 40W < 45W POWER OFF < 1W LED INDICATOR The power management feature of the monitor is comprised of four stages: ON(GREEN) and POWER OFF(GREEN OFF ).
17 ’’ 1 9’’ LCD-Type 17 ˝ Diagonal AM-T FT(Active- Matrix) 19 ˝ Diagonal AM- TFT(Active -Matrix) Pixel pitch(mm ) : 0.264(H) x 0.2 64(V) Pixel pitch(mm ) : 0.
WEEE S ymbols 46 …………………………………………………………………… . INSTRUCTION MANUAL Correct Disposal of T his Product (Waste Electrical & Electronic Equipment) (Ap.
MEMO.
MEMO.
.
P/N : L39ME01 96 Rev.4.
An important point after buying a device ViewZ VZ-17RTV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ViewZ VZ-17RTV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ViewZ VZ-17RTV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ViewZ VZ-17RTV you will learn all the available features of the product, as well as information on its operation. The information that you get ViewZ VZ-17RTV will certainly help you make a decision on the purchase.
If you already are a holder of ViewZ VZ-17RTV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ViewZ VZ-17RTV.
However, one of the most important roles played by the user manual is to help in solving problems with ViewZ VZ-17RTV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ViewZ VZ-17RTV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
