Instruction/ maintenance manual of the product F-217 AG Neovo
Go to page of 23
.
1 Table of Contents GETTING STARTED 2 Quick Setup 2 FOLLOW THESE DIRECTIONS TO CORRECTLY SET UP YOUR MONITOR. 2 Unpacking 3 Identifying Component s and Controls 4 Adjusting the Monitor’s Tilting Ang.
2 G ETTING S TARTED Your LCD monitor is versatile, ergonomic, and above all easy t o use. The LCD monit or is capable of displaying most sta ndards, f rom 640 x 480 VGA to 1280 by 1024 SX GA. Th e front-panel co ntrols allow you t o easily adjus t the monito r’s display paramet ers to suit your habits.
3 Unpacking After you unpack the mo nitor, m ake sure the fo llowing items are included in the box and are in good condition: LCD monitor Power adapter Power cord Floppy/CD-ROM (containing Windows information file) This user’s manual If you find that any of thes e items are mis si ng or appear damaged, contact yo ur dealer immediately.
4 Identifying Components and Controls The follow ing figure sho ws the monit or’s pow er button, s tatus LED, and On-Screen Display (OSD) controls: The controls are described below: AUTO button Automatically adjusts the picture and performance.
5 Adjusting the Monitor’s Tilting Angle Your LCD monit or’s vertical tilt ing angle can be adjusted for co mfortable viewing. To adjus t the tilting angle, grasp th e top corners of the monitor with both hands and tilt to th e desired angle. Warning! Forcing the monitor past it s maximum extension can result in damage to the monitor.
6 Connecting AC Power Refer to the follo wing instructio ns for connecting AC pow er to the LCD monit or. 1. Plug the female end of the po wer cable into t he AC-adapter and the male end of the power cord int o a wall so cket. (The plug on t he power cable will vary according to the elect rical standard for your area.
7 Connecting Video 1. Turn o ff the PC and the LCD monit or be fore connecting your LCD monitor to the computer. 2. Co nnect the VGA cable to t he PC’s VGA port .
8 C USTOMIZING YOUR M ONITOR This section covers t he LCD monitor’ s On-Screen Display (OSD), and fro nt panel control buttons. Adjusting the Monitor’s Display The LCD mo nitor features an int uitive, menu-driven, OSD. Y ou can access the OSD any t i m e t h a t t h e P C i s p o w e r e d u p .
9 6. Use the DOWN or UP buttons to select a new menu item. 7. Push the AUTO button once to save settings and return to th e Group sel ection menu. 8. Push the AUT O button again to exit the OSD.
10 Clock & Phase 1. To fine tune picture perfo rmance to compens ate for drifts in the comput er signal, select the item fro m the menu. 2. Use the RIGHT and LEFT buttons to set th e displ ay as desire d on the 0-100 scale that appears at the bottom of the wi ndow.
11 Color Temperature CO L O R T E MP ER A T UR E 12 80 X 1024 / Hz ( , ) SEP 60 + + OSD PA N E L D E F A U LT 93 00 K 65 00 K 55 00 K US ER 42 64 57 P RES S OR K EY T O CON FIR M R B G Selecting a Col.
12 OSD Adjust OS D A DJUS T 12 80 X 1024 / Hz ( , ) SE P 60 + + OSD OSD POSITION OSD TIME TR ANSP AREN CY O S D LAN GU AGE F OSD Position 1. To position the OSD w indow to yo ur preference, select OSD Posi tion from the menu. 2. Use the RIGHT and LEFT buttons to move the displ ay through its av ailable positions.
13 Selecting a Language 1. To select the language in which you wish the OSD t o appear, select Language from the me nu. 2. Use the RIGHT and LEFT buttons to toggle thr ough the availabl e languages shown at t he botto m of the windo w. 3. Pu sh the AUTO button once to save settings and retur n to the Group se lection menu.
14 Information Select Information fr om the menu to displ ay the monitor’s name and model number. Backlight 1. To set the brigh tness of the monitor ’s backlight, sel e ct Backlight f r om the menu. 2. Use the RIGHT and LEFT buttons to set th e brightness as desired on the 1-100 scale.
15 T ROUBLESHOOTING Troubleshooting Procedures This LCD monitor come s p re -ad justed with stand ar d VGA timing. Due to outp ut timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display m ode or new VGA card is s elected.
16 Trouble Shooting Symptom Check Items · No picture · LED pow er indicator is not lit · Check that t he monitor po wer switch is t urned on. · Check that the power adapter is properly connected to the monitor. · Check that the power cord is properly connected to the power adapter.
17 LCD Panel Display Technical Features and Specifications Screen Size 17-inch (431.8 mm ) diagonal Panel * Pixel Format 1280 by 1024 vertical strip Frequency Horizontal: 30 k Hz – 80 kHz, Vertical: 50 Hz - 75Hz Input Signal Max.
18 Regulation FCC Compliance This equipment has b een tested and found to co mply with the lim its for a Clas s B digital device , pursuant to Part 15 of the F CC Rules. These limit s are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial enviro nment.
19 TCO ‘95 Congratulations! You have just purchased a TCO’95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchas e has als o co ntr ibuted to r educing the bur den on the environment and also to the further devel opment of enviro nmentally adapted electronics products.
20 Current informatio n regarding TCO’95 appro ved and labeled products may also be o btained via the Internet, using the addr ess: http://www.tco-info.
21 TCO’99 Congratulations! You have just purchased a TCO'99 appr oved and labeled product! Your choice has pr ovided you with a product developed for pr ofess ional use. Your pur chase has als o contributed to reducing the burden on the environment and also to the further devel opment of enviro nmentally adapted electronics products.
22 Current information regarding TCO'99 approved and labeled products may also be obtained via the Internet, using t he address: http ://www.t co-i nfo.com/ Environmental requirements Flame retardants Flame retardants are pr esent in printed circuit boar ds, cables, wires, casings and ho usings.
An important point after buying a device AG Neovo F-217 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AG Neovo F-217 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AG Neovo F-217 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AG Neovo F-217 you will learn all the available features of the product, as well as information on its operation. The information that you get AG Neovo F-217 will certainly help you make a decision on the purchase.
If you already are a holder of AG Neovo F-217, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AG Neovo F-217.
However, one of the most important roles played by the user manual is to help in solving problems with AG Neovo F-217. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AG Neovo F-217 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
