Instruction/ maintenance manual of the product SFR30 Smeg
Go to page of 12
Dear Customer, Thank you for purchasing one of our products. We are confident that this practical and modern appliance, made with top quality materials, will satisfy your needs in every way. This new piece of equipment is simple to use but, before operating it, please read this booklet carefully for best results.
TYPE: FD30 14 1 Heating resistance 2300 W 2 Fryer kettle 3 Fryer control knob 4 Appliance on/off indicator lamp Caution: this appliance is designed for personal household use only .
1) SWITCHING ON THE FR YER The fryer is controlled by a thermostat and it can be switched on by turning the knob clockwise to the position desired (see fig. 1). A red indicator lamp indicates it is switched on. Automatic cut-off switch The appliance is provided with a cut-off device which intervenes if the oil temperature exceeds the safety limit.
16 USE CAUTIONS FOR FRYING Only oil or vegetable fat should be used for frying. Amount of oil / fat min. 2 - max. 2.5 l. Avoid mixing different types of oil / fat. It is important to fry at the right temperature for good results. · Temperature too low: the food to be fried cooks too slowly and absorbs oil / fat.
17 CLEANING 2) CLEANING THE FR YER With the proper care the fryer will maintain its shine for a long time and will be easier to clean. Use a sponge, water and soap (or a product available on the market) to clean stainless steel parts, but only when the appliance is cool.
18 INST ALLA TION TECHNICAL DA T A FOR INST ALLERS Installation and maintenance listed in this section must only be carried out by qualified personnel (law n° 46 and D.P .R. 447). A faulty installation can cause damage to persons, animals or objects, towards whom the manufacturer cannot be held responsible.
4) SECURING THE FR YER To secure the fryer to the worktop the fastening clamps accompanying this booklet must be assembled. The following procedures must be carried out to do this: · remove all movab.
20 5) ELECTRICAL CONNECTIONS The electrical connection must be made in conformity with current rules and regulations. Before making a connection, check that: - The capacity and outlets of the electrical installation are suitable for the maximum power output of the appliance (see the information label attached on the underside of the housing).
Name W 21 Heating resistance 2300 TYPE AND SECTION OF POWER CABLES 2300 W 3 X 1.5 mm 2 (*) ELECTRICAL COMPONENTS OUTPUT MAINTENANCE Before carrying out maintenance of any kind, disconnect the appliance from the mains. All maintenance must be carried out by authorized personnel only .
22 TECHNICAL SPECIFICA TIONS DEEP F A T FR YER Voltage 230 – 240 V ~ Frequency 50/60 Hz Total nominal power 2300 W.
23 TECHNICAL ASSIST ANCE AND SP ARE P ARTS Before leaving the factory, this equipment was tested and adjusted by skilled personnel so as to guarantee the best operating results. Original spare parts can only be found at our technical service centres and authorized stores.
24.
An important point after buying a device Smeg SFR30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg SFR30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg SFR30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg SFR30 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg SFR30 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg SFR30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg SFR30.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg SFR30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg SFR30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center