Sharp PN-L702B-PKG2A Monitor manual

Summary of contents each page of manual

Page 1

PN-L702B LCD MONIT OR OPERA TION MANUAL.
Page 2

IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
Page 3

3 E IMPORT ANT INFORMA TION W ARNING:  TOREDUCE THERISKOFFIREORELECTRICSHOCK,DONOTEXPOSE THISPRODUCT TORAINORMOISTURE. RISKOFELECTRIC SHOCK DONOTOPEN CAUTION CAUTION:  TOREDUCE THERISKOFELECTRIC SHOCK,DONOTREMOVECOVER.
Page 4

4 E IMPORT ANT INFORMA TION (Continued) A. Information on Disposal for Users (private households) 1. In the European Union Attention:Ifyouwanttodisposeofthisequipment,please.
Page 5

5 E ThankyouforyourpurchaseofaSHARPLCDproduct. T oensuresafetyandmanyyearsoftrouble-freeoperationofyour product, please read the Safety Precautions carefully before using this product.
Page 6

6 E SAFETY PRECAUTIONS (Continued)  19.  Batteries—Incorrectuseofbatteriesmaycausethebatteriestoburstorignite. A leakybatterymaycorrodetheequipment, dirty your hands or spoil your clothing.
Page 7

7 E - TheTFT colorLCDpanelusedinthismonitorismadewith theapplicationofhighprecisiontechnology .However ,there may be minute points on the screen where pixels never light or are permanently lit.
Page 8

8 E MOUNTING PRECAUTIONS • Thisproductisforuseindoors. • A mountingbracketcompliantwithVESA specicationsis required. • Sincethemonitorisheavy ,consultyourdealerbefore installing, removing or moving the monitor .
Page 9

9 E Forinformationon thetouchpaneldriver ,seetheT ouchPanelDriverO perationManual.Forinfor mationonthePenSoftwar e, see the Pen Software Operation Manual. Supplied Components If any component should be missing, please contact your dealer .
Page 10

10 E n Front view 7 68 11 5 22 2 2 4 3 1. T ouch pen ultrasonic sensor 2. Infrared transmitter/receiver 3. Power button (Seepage16.) 4. T ray 5. T ouch panel power LED 6. Remote control sensor (Seepage15. ) 7. Input switch (Seepage21.
Page 11

11 E Part Names n Remote control unit 1 2 3 4 5 6 9 8 7 1. Signal transmitter 2. POWER button (Seepage16.) 3. MUTE button (Seepage21.) 4. VOL +/- buttons (Seepage21.) BRIGHT +/- buttons (Seepage21.) Cursor control ( / / / ) buttons 5.
Page 12

12 E Connecting Peripheral Equipment Caution • Besuretoturnoffthemainpowerswitchanddisconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipmenttobeconnected.
Page 13

13 E Connecting Peripheral Equipment Connection when the PN-ZB01 (optional) is attached ThePN-ZB01expansionboard(optional)allowstheuseof additional connection terminals. 7. PC/A V DVI-D input terminal • SetDVIofINPUTSELECT ontheOPTIONmenu according to the device to be connected.
Page 14

14 E Connecting the Power Cord Caution • Donotuseapowercordotherthantheonesuppliedwith themonitor . 1.T urnof fthemainpowerswitch. 2.Plugthepowercord(supplied)intothe ACinputterminal.
Page 15

15 E Preparing the Remote Control Unit Installing the batteries 1. Pressthecovergentlyandslideitinthedirectionofthe arrow .
Page 16

16 E Caution • T urnonthemonitorrstbeforeturningonthePCor playback device. T urning on the main power Main power switch Caution • Themainpowermustbeturnedon/offwiththemainpower switch.
Page 17

17 E T urning Power On/Off n Date/time setting • Ifthetimehasyettobesetwhenthemonitorisrstturned on, the date/time setting screen appears. Set the date and time. DA TE/TIME SETTING SET CANCE L // OK···[MENU] : : 01 01 11 / 12 AM 00 : / 20 1.
Page 18

18 E T ouch Pen Preparations/T ouch Action Inserting the battery 1. Rotatethebatterycapandremoveit,andthenpulloutthe cover . Battery cap 2. Insertthesuppliedbattery(LR-03(“AAA”size))inthe orientation shown, and attach the cover and battery cap.
Page 19

19 E Double-tap* 1 Sameactionasdouble-clickingamouse. Quicklytouchtwicewithyournger/pen. Whendouble-tappingwithyournger ,besuretoliftyour ngersufcientlyoffthescreenafterthersttap.
Page 20

20 E Press-and-tap Same action as right-clicking a mouse. With one nger touching the screen, tap once (single tap) with another nger . With one nger touching T ap once (single tap) with anoth.
Page 21

21 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter . * Y oucanselecttheinputterminalbypressingtheinput switch of the monitor .
Page 22

22 E Basic Operation n Switching the screen size Evenwhenthescreensizeischanged,thedisplaymayremainthesamedependingontheinputsignal. WIDE PCinput Displaysimagesoitllstheentirescreen.
Page 23

23 E Menu Items Displaying the menu screen Videoandaudioadjustmentandsettingsofvariousfunctions are enabled. This section describes how to use the menu items.
Page 24

24 E Menu item details The menu will differ depending on the input mode. n SCREEN Y ou can move the menu screen display position each time DISPLA Y is pressed. AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V -POS are automatically adjusted. Pressing performs adjustment.
Page 25

25 E USER Adjusts each item when the WHITE BALANCE is set to USER. R-CONTRAST .... Adjusts bright-toned red component. G-CONTRAST .... Adjusts bright-toned green component. B-CONTRAST .... Adjusts bright-toned blue component. R-OFFSET .......... Adjusts dark-toned red component.
Page 26

26 E Menu Items n OPTION DA TE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Set the date in “Month/Day/Y ear” order . Set the time on a 12-hour basis. (Factory default) DA TE/TIME FORMA T Sets the date/time display format.
Page 27

27 E Menu Items AUDIO OUTPUT (RCA) Sets the volume of sound output from the audio output terminals. WhensettoV ARIABLE2,soundwillnotbeoutputfromthe built-inspeakerortheexternalspeakerterminal. V ARIABLE1 .
Page 28

28 E Menu Items n Dual screen display Y oucandisplaythescreensofthePCinputsignaland A V input signal simultaneously . Setthisfunctionwith“PIPMODES”inthePIP/PbyP menu. PIP Main screen Sub screen A sub s cree n is displ ayed inside a main screen.
Page 29

29 E n SCHEDULE Y ou can set the time to switch the monitor on and off. Setth isfunct ionwith “SCHEDU LE”int heOPTIO Nmenu. (See page 26.) - : – – – – – – – – – – – – – – – – – SCHEDULE No.
Page 30

30 E n ADV ANCED items (A V input) (See page 24 for additional Menu item details.) FLESH TONE Adjustthehuecontrol. 3D-NR Reduce the noise of playback images on video. Settingahigherlevelreducesmorenoise.However ,itmay cause blurring on an image.
Page 31

31 E Y oucanreturnthesettingstotheirfactory-presetvaluesand restrict operations. 1. Hold SIZE down until “F” appears in the upper left corner of the screen.
Page 32

32 E Controlling the Monitor with a PC (RS-232C) Y oucancontrolthismonitorfromaPCviaRS-232C(COM port)onthePC.
Page 33

33 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
Page 34

34 E Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the followingconnectionandIDnumbersetup.
Page 35

35 E Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. Y ou can use Repeater controlfunctionwithoutassigningIDnumbers.
Page 36

36 E RS-232C command table How to read the command table Command: Commandeld(Seepage32.) Direction: W Whenthe“Parameter”issetintheparametereld(seepage32),thecommandfunctionsasdescribed under“Control/ResponseContents”.
Page 37

37 E SCREEN menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO ASNC W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ CLOCK CLCK WR 0-1200 0-1200 WhentheinputmodeisPCD-SUB,PCRGB.
Page 38

38 E PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ ANALOGGAIN ANGA WR 0-127 0-127 WhentheinputmodeisPCD-SUB,PCRGB.
Page 39

39 E AUDIO menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) TREBLE AUTR WR -5-5 -5-5 ○ ○ ○ BASS AUBS WR -5-5 -5-5 BALANCE AUBL WR -10-10 -10-10 RESET ARST .
Page 40

40 E Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DA TE/TIME SETTING DA TE WR AABBCCDDEE AABBCCDDEE AA: Y .
Page 41

41 E PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIPMODES MWIN WR 0-3 0-3 0:OFF ,1:PIP ,2:PbyP ,3:PbyP2 ○ ○ ○ PIPS.
Page 42

42 E Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREENSIZE(PC) WIDE WR 1-5 1-5 1:WIDE,2:NORMAL,3:DotbyDot,4:ZOOM1,5:�.
Page 43

43 E WhenthePN-ZB01(optional)isattached,yourmonitorcan beconnectedtoaLANallowingyoutocontrolitfromaPCon the LAN. Y oucanalsocongurethemonitortosende-mailnotication when it has a problem.
Page 44

44 E ■ T o set from a PC WhenthemonitorisconnectedtoaPC,LANsettingscanbe conguredviaPC. Set up process (1)ConnectyourmonitortoaPC (2.
Page 45

45 E 6. Clickon“LANSETUP”underNETWORK. 7. Specifythe“DHCPCLIENT”,“IP  ADDRESS”,etc. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Page 46

46 E ■ INFORMA TION Information about this monitor appears. ■ CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE )ontheremotecontrolunit.(Seepage21.) TIPS • Instandbymode,PowerONistheoperationavailable.
Page 47

47 E ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Page 48

48 E ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the InternetExplorerscreen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
Page 49

49 E ■ MAIL (RECIPIENT) Thisscreenallowsyoutospecifytherecipientsofthee-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specifythee-mailaddressestosenderrornoticatione-mail to.
Page 50

50 E Controlling the Monitor with a PC (LAN) ■ SNMP Y oucanconguresettingsrelatedtoSNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Setthenameofthecommunityrequiredfortheaccess.
Page 51

51 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Isthepowercorddisconnected?(Seepage14.
Page 52

52 E When “AUTO DIMMING” is displayed. • Whentheinternaltemperatureofthemonitorrises excessively , the brightness of the backlight automatically decreases in order to prevent a further temperature rise.
Page 53

53 E Specications n Product Specications Model PN-L702B LCDcomponent 70"Class[69-1/2inch(176.6cm)diagonal]TFT LCD Max. resolution (pixels) 1920x1080 Max. colors Approx.1.06billioncolors Pixel pitch 0.802mm(H)×0.
Page 54

54 E Specications n Dimensional Drawings Note that the values shown are approximate values. 4-9/16 [1 16] Unit: inch [mm] 7-7/8 [200] 7-7/8 [200] 3-15/16 [100] 3-15/16 [100] 7-7/8 [200] VESA holes .
Page 55

55 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsync Vsyn c D ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 1280 × 768 1280 × 800 1280 .
Page 56

56 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDSdata2- 13 N.C. 2 TMDSdata2+ 14 +5V 3 TMDSdata2/4shield 15 GND 4 N.C. 16 Hot-plugdetection 5 N.C. 17 TMDSdata0- 6 DDCclock 18 TMDSdata0+ 7 DDCdata 19 TMDSdata0/5shield 8 N.
Page 57

57 E • Wheninstalling,removingormovingthemonitor ,ensurethatthisiscarriedoutbyatleast4people. • Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor .
Page 58

PN-L702BMuEN1 1H(1).

Read the Sharp PN-L702B-PKG2A manual - avoid problems

An important point after buying a device Sharp PN-L702B-PKG2A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Sharp PN-L702B-PKG2A
to know what to do in case of failure Sharp PN-L702B-PKG2A

If you have not bought Sharp PN-L702B-PKG2A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp PN-L702B-PKG2A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp PN-L702B-PKG2A you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp PN-L702B-PKG2A will certainly help you make a decision on the purchase.

If you already are a holder of Sharp PN-L702B-PKG2A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp PN-L702B-PKG2A.

However, one of the most important roles played by the user manual is to help in solving problems with Sharp PN-L702B-PKG2A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp PN-L702B-PKG2A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Sharp PN-L702B-PKG2A manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Read the Sharp PN-L702B-PKG2A manual - avoid problems

Other manuals from the category Monitor

3M ChassisTouch 15

3M MicroTouch CT150

3M MicroTouch M1700SS

3M MicroTouch M150

3M MicroTouch M2256PW

AG Neovo E-19A

AG Neovo F-215

AG Neovo F-217

AG Neovo F-417

AG Neovo K-19