Instruction/ maintenance manual of the product 831.159412 Sears
Go to page of 18
Model No. 831.159412 Serial No. Write the serial number in the space above for reference. Serial Number Decal F- x EE R C i _%_ E_ EQUIPMENT HELPLINE! 1-800-735-5879 CAUTION! Read all precautions and Instructions in this user's man- ual before using this equip- ment.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..................................................................... 2 BEFORE YOU BEGIN ........................................................................... 3 ASSEMBLY ...................................
BEFORE YOU BEGIN Thank you for selecting the PROFORtvP BODYLIFT Body Weight Resistance System. The compact BODYLIFT features an impressive array of weight sta- tions designed to develop every major muscle group of the body.
ASSEMBLY Before beginning assembly, carefully read the following Information end Instructions: • Assembly requires two people. • Due to the size of the BODYLIFT, it should be assembled in the location where it will be used.
3. 3 . . Attach the Footrest (35) to the Front Upright (7) with two 3/8" x 2 3/4" Bolts (85), two 3/8" Flat Washers (53), and two 3/8" Nylon Locknuts (33) as shown. Remove the 3/8" x I 112" Carriage Bolt (80) and the 3/8" Nylon Jam Nut (41) from the indicated brackets on the Front Upright (7).
. 7o Slide a Weld Cover (63) onto each of the indicat- ed axles on the Front and Rear Uprights (7, 2). The Weld Covers must be tumed so the open sides are facing the Uprights. Lubricate the axles. Slide a Short Riser (4) onto the axles, The Short Riser must be turned as shown.
. Carefully cut the wire tie attached to the Cable (25). Wrap the loop of Cable from steps 4 and 5 around the 3 1/2" Pulley (27) as shown. Hold the Pulley and the Pulley Covers (88) between the indicated holes in the Selector Plate (19). Make sure that the Pulley Covers are turned so the small rims are inside the loop of Cable as shown.
10. Pull the Moment Arm(10) forward. Hold the lower and of the Left Press Arm (52) in the upper end of the Moment Arm. The Left Press Arm must be turned so the Handle (12) is on the side shown. Attach the Left Press Arm with two 3/8" x 2 1/2" Bolts (44) and two 3/8" Nylon Locknuts (33).
14. Insert one Pad Tube (13) into the Seat Frame (8). 14 Insert the other Pad Tube into the LegLever (9). Slide two 6" Pads (24) onto each Pad Tube (13).
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the BODYLIFT. Replace any worn parts immediately. The BODYLIFT can be cleaned using a damp cloth and mild non-abrasive detergent, Do not use solvents, HOW TO TIGHTEN THE CABLE Woven cable, the type used on the BODYLIFT, can stretch slightly when it is first used.
USING THE BODYLIFT The instructions below describe how each part of the BODYLIFT can be adjusted. Refer to the EXERCISE GUIDE accompanying this user's manual for exercise guidelines, and to see how the BODYLIFT should be set up for each exercise.
.
This chart is provided to help you identify the small parts used in assembly. Remove this chart from the user's manual before beginning assembly..
PART IDENTIFICATION CHARTmModel No. 831.159412 This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
1/4" x 3/4" Sorew (47)-2 1/4" x 1 1/4" Bolt (49)-3 3/8" x 2" Bolt (87)-1 1/4" x 2 1/2" Carriage Bolt (46)-1 5/16" x 2 3/4" Bolt (78)-1 1/4" x 2 1.
EXPLODED DRAWING--Model No. 831.159412 71 79 14 46 33 24 21 67 69 .78 13 24 33 53 _. 27, 42 66 12 18 6O 33 9O 63 52 i 72 37 .-'" 27 5O 41 53 75 4O 63 85 4 57 59 19 59 57 81 RO195B.
PART LIST--Model No. 831.159412 Key Part Key Part No. No. Qty. Description No. No. Qty. Description 1 120574 1 Base 54 013485 1 2 120575 1 Rear Upright 55 121576 3 3 121466 2 Long Riser 56 102603 2 4 .
HOW TO ORDER REPLACEMENT PARTS Each BODYLIFT has its own MODEL NUMBER. Always mention this MODEL NUMBER when requesting service or repair parts for your BODYLIFT. All parts listed herein can be ordered through SEARS, ROEBUCK AND CO. SERVICE CENTERS and most SEARS RETAIL STORES.
An important point after buying a device Sears 831.159412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 831.159412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 831.159412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 831.159412 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 831.159412 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 831.159412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 831.159412.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 831.159412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 831.159412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
