Instruction/ maintenance manual of the product 631.29739 Sears
Go to page of 18
SEARS Model No. 631.297390 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference. EQUIPMENT [e] I# HELPLINE! 1-800-736-6879 _tLCAUTION Read all precautions and instruc- tions in this manual before using this equipment.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. 2 BEFORE YOU BEGIN ....................................................................... 4 ASSEMBLY ...........................................
13. Never move the walkingbelt while the power is turnedoff. Do not operate the treadmill il the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the tread- mill is not working properly.) 14.
BEFORE YOU BEGIN Congratulations for purchasing the new PROFORM ® CROSSWALK GT treadmill. The CROSSWALK GT treadmill combines advanced technology with innova- tive design to let you enjoy an excellent form of cardio- vascular exercise in the convenience and privacy of your home.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the _rawings below to identify the small parts used in assembly.
3. With the help of a second person, hold the Console Base (6) andthe Right Handrail (32) near the right Upright (14). Feed allexcess Wire Harness (26) down into the right Upright; if necessary, bend the Wire Harness as shown. Route the Wire Harness (26) through the bracket on the Right Handrail (32) as shown.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
DIAGRAM OF THE CONSOLE Monitor Displays Incline Control "1._. SPEED TRAINING ZONE 1 I Aerobic I _ l-at Burn HEART RATE TRAINING ZONE C IM_N _PM. _ M_X B_M I ¢2o I 125 145 162 ) (3o I 12o 138 155 / (4o I 11s z3o i,_5 1 ............... (so I _1o 125 14o j C6o / io5 118 _3o / ( 80 I _,o 10.
B D Reset the speed control. Slide the speed control down to the RESET position. Note: Each time the walking belt is stopped, the speed control must be moved to the RESET position before the walking belt can be restarted, Start the walking belt.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. Opened 2.
c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. c Tripped Reset PROBLEM: The power turns off during use SOLUTION: a.
PROBLEM: The walking belt is off-center when walked on SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each.
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for in- dividuals over the age of 35 or individuals with pre-existing health problems. The following guidelines will help you to plan your ex- ercise program.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your heart rate is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your heart rate in your train- ing zone for longer than 20 minutes.
PART LIST--Model No. 831.297390 R0498A Key No, Qty, Description Key No, 1 1 Key/Clip 57 2 1 Left Handrail 58 3 2 Cage Nut 59 4 1 Incline Control 60 5 4 Rear Isolator Screw 61 6 1 Console Base 62 7 1 S.
EXPLODED DRAWING--Model No. 831.297390 93 58 95 6 99 100 97 101 // _. 91 j/ 16 71 71 / R0997A 1 77 / 80 79 25 33 i ii' 29 88 m X r- 0 m if} 13 I Z 0 33 0 (.
SEARS Model No, 831,297390 QUESTIONS? If you find that: you need help assembling or operating the PROFORM ® CROSSWALK GT • a part is missing • you need to schedule repair service call our toll-fr.
An important point after buying a device Sears 631.29739 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 631.29739 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 631.29739 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 631.29739 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 631.29739 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 631.29739, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 631.29739.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 631.29739. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 631.29739 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
