Instruction/ maintenance manual of the product RBBE0955.0 Reebok
Go to page of 19
CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Model No. RBBE0955.
2 W ARNING DECAL PLACEMENT W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Read all instructions in this manual and al l warnings on the weight bench before using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.
4 Curl Pad Barbell W eight Carriage Weight Rest Right Side Left Side Note: The terms “right side” and “left side” are determined relative to a person sitting on the bench; they do not corre - spond to right and left on the drawings in the manual.
5 ASSEMBL Y 1. Attach an Upright (4) to the Crossbar (3) with two M8 x 65mm Bolts (48), two M8 W ashers (32), and two M8 Nylon Locknuts (17). Make sure the warning decal is in the indicated position. Do not tighten the Locknuts. Repeat this step with the other Upright (4).
6 2. Orient the Stabilizer (57) so that the indents around the holes are on the bottom. Attach the B ench Leg (2) to the Stabilizer with two M8 x 50mm Carriage Bolts (53) and two M8 Nylon L ocknuts (17).
7 6. Attach the Backrest T ubes (12) to the Backrest (20) with four M6 x 38mm Screws (42) and four M 6 W ashers (49). D o not tighten the Screws. 8. Orient the Seat (21) as shown and attach it to the Bench Frame (1) with four M6 x 15mm Screws (41). 9.
8 10. Identify the Left Butterfly Arm (6) by the posi- tion of the long side of the indicated tube. S lide a Weight Stop (31) onto the Butterfly Arm. G rease an M10 x 57mm Bolt (26). Attach the Left Butterfly Handle (7) to the Left Butterfly Arm (6) with the Bolt and an M10 Nylon Locknut (51).
9 14. Attach the Curl Pad (22) to the Curl Post (1 1) with two M6 x 15mm Screws (41). 16. Make sure that all parts are properly tightened before the weight bench is used. The use of all remaining parts will be explained in ADJUSTMENTS starting on the next page.
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for impor- tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise.
1 1 4 6 18 45 55 56 4 9 STORING THE CURL P AD T o store the Curl Pad (22), slide the Curl Post (1 1) onto a storage tube on an Upright (4). The Lat T ower (9) can be stored in the same way .
12 56 5 61 or 62 10 33 6 A TT ACHING WEIGHTS TO THE BARBELL Slide an equal amount of Weight (61, 62) onto each end of the barbell. Slide the two Lock Collars (63) against the Weights, and tighten them fully . 61 Barbell 63 62 W ARNING: Always secure the Weights (61, 62) on the barbell with the Lock Collars (63).
13 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, p ush them close to their maximum capacity . Y our mus- cles will adapt and grow as you progressively increase the intensity of your exercise.
14 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
15 MONDA Y D ate: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
M8 x 39mm Bolt (52) M8 x 65mm Bolt (48) M8 x 54mm Bolt (43) M8 x 52mm Bolt (18) M6 W asher (49) M8 W asher (32) M8 Nylon Locknut (17) M10 W asher (50) M10 Nylon Locknut (51) M6 x 15mm Screw (41) M6 x .
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user ’ s manual for information about ordering replacement parts.
EXPLODED DRA WING—Model No. RBBE0955.0 R0805A 60 59 63 63 46 46 58 62 61 33 14 15 15 13 2 9 2 9 41 11 22 28 10 37 28 47 37 51 34 26 50 4 0 3 4 36 35 35 50 51 27 51 15 8 26 28 30 56 55 28 28 31 30 12.
Part No. 230725 R0805A Printed in China © 2005 ICON IP , Inc. LIMITED W ARRANTY T o order replacement parts, see the front cover of this manual. T o help us assist you, please be prepared to give the following information: 1. the MODEL NUMBER of the product (RBBE0955.
An important point after buying a device Reebok RBBE0955.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Reebok RBBE0955.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Reebok RBBE0955.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Reebok RBBE0955.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Reebok RBBE0955.0 will certainly help you make a decision on the purchase.
If you already are a holder of Reebok RBBE0955.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Reebok RBBE0955.0.
However, one of the most important roles played by the user manual is to help in solving problems with Reebok RBBE0955.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Reebok RBBE0955.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
