Instruction/ maintenance manual of the product TM-8115 Posiflex
Go to page of 15
Part 1 I. FEATURES • LM/TM-8115 is a stand along LCD monitor for industrial and commercial use. • TM-8315 is a second display which suit for Posiflex POS Terminals with Gen.5 base stand. • Application covers POS, Factory Automation etc. • High quality 15” TFT LCD panel with scaling function for full screen display .
Part 2 II. CARTON CONTENTS 1. Touch Monitor (Main unit + Adj ustable base stand asse mbly) 2. User’s Manual 3. VGA cable 4. USB cable 5. Power adaptor & power cord(For TM/LM-8115) (For TM-83 15, please refer to the terminals manual to sup port power from VGA cable) 6.
Part 3 TM-8315 After open the carton, ple ase take out the monitor carefull y. Please place the monitor’s bracket to the ba ck of base stand a nd fasten the sc rews which circled on the upper picture.
Part 4 B. SIDE VIEWS TM/LM-8115 TM-8315 Lock/release lever Push in this direction to adjust the tilt angle of the display panel Control button area Lock/release butto n to detach the main unit NXT but.
Part 5 V. INPUT / OUTPUT PORTS VI. AVAILABLE OPTION ITEMS 1. Side mount upgrade kit SD-400 Z or KP-300 2. Wall mount kit (W B-6000V-B) VII. HARDWARE INSTALLATION A.
Part 6 Refer to the b ottom vie w picture of the separated base, pass all cable through the cable tunnel as hollow arro wed with cab le tie fro m the cable passage to the main unit i n left pic ture.
Part 7 C. Option Wall Moun t Kit For TM/LM-8115 Select a flat sur face on wall of adequate stren gth and with proper ventilatio n and s pace condition. Please use the ri ght material to hold this m onitor according to the w all material ( Drywall, concrete, solid wood, etc).
Part 8 clicking on the right butto n of a m ouse, touching any point on the screen surface after touchin g the right-clic k sticky button r esults as a click on t he right button of the mouse at t hat point.
Part 9 box is checked. Touch Mode Setting – Only one of the three r adio buttons can be selected. T he mouse emulation refers to the drag a nd dro p function. OK – T his button accep ts all parameters set a nd c loses the utility window. Apply – T his button accepts all p arameters se t and re mains in the utility windo w.
Part 10 full screen display of Wi ndo ws DOS box should be avoide d. E. APPLICAT ION LIMITA TION The USB touch is not ap plicab le for OS other than Wi ndows as USB mouse is not s upported in DOS environment. The USB touch i s also not applicab le when the monitor is used t o be the extended screen i n mu ltiple monitor application.
Part 11 B. OSD functions Press “OSD” button with a n ormal display on the screen t o activate the OSD functions (On Scree n Displa y adjustment). T he OSD windo w will pop up on the screen. On top part of this window is a P osiflex logo with the OSD firmware versio n indicated to its lower right.
Part 12 exits the OSD window leaving 2 icons belo w at center of the screen. Press “NXT” b utton to switch the selection. Pr ess “OSD” button to make the choice. “ACCEPT”: Accept the adjust ment setting. “REJECT”: Decli ne the adjust ment setting and return to previous setting.
Part 13 horizontal size, phase, horizontal p osition, vertical positio n and exit. “AUTO GEOM ETRY ADJ UST”: Upo n an “OSD” button press on this icon the monitor will perform an automatic geometry adjustment and exits t he OSD window lea ving 2 icons b elow at center o f the screen.
Part 14 OSD horizontal posit ion, OSD vertical p osition and exit. “OSD TIME”: W hen thi s item is selected , there will be only the O SD ti me ic on with an ad justment indication bar u nder it bet ween the main menu a rea and t he video signa l mode.
Part 15 XI. SUPPORTED DISPLAY MODES For video signals be yond the supported disp lay modes, there will be a message “Out Of Range” on middle o f screen. M aximum s upported colo r depth is 24 bits or 16 .2 M colors. Suppor ted display modes are as in the table: Display Resolution Refresh Rate (Hz) Horizontal Frequenc y (KHz) 640*400 70 31.
An important point after buying a device Posiflex TM-8115 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Posiflex TM-8115 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Posiflex TM-8115 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Posiflex TM-8115 you will learn all the available features of the product, as well as information on its operation. The information that you get Posiflex TM-8115 will certainly help you make a decision on the purchase.
If you already are a holder of Posiflex TM-8115, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Posiflex TM-8115.
However, one of the most important roles played by the user manual is to help in solving problems with Posiflex TM-8115. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Posiflex TM-8115 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
