Instruction/ maintenance manual of the product X2850 Planar
Go to page of 27
www .planar .c om USER'S GUIDE LED LCD Monitor IX2850.
Content Operation Instr uctions ......................................................................................................... .......................................... 1 Unpacking In structions ............................................
Operation Instructions Thank you for purchasing the IX2850 LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
C OMMUNIQUE D’ A VERTISSEMENT DE LA FC C C ONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE P AR LA FC C) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC.
3 Unpacking Instructions Remove the LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Remove base from plastic bag and attach to base.
Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit avant de le nettoyer.
Package Overview LED LCD Monitor Base P ower C ord DisplayP or t Cable HDMI Cable USB 3.0 Cable (A to B) User ’ s Guide 5.
First Setup Install the stand base 1. Lay the LED L CD Monitor flat on a table with the LED screen face down. T o prevent the monitor from being scra tched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.
Front View of the Product ①②③④ ⑤⑥ ① OSD Turn On/ Off ② Scroll Down/ Adjust Decrease/ Audio/ Preset * ③ Scroll UP/ Adjust Increase/ PIP (PBP)/Swap * ④ Input select/ Confirm Selection/ Auto * ⑤ Power On/ Off ⑥ LED Indicator * Hot keys Instruc tions please see “U sing the OSD Menu” on page 10.
Rear View of the Product ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① Power Input ② DVI Input (DVI 24 pin) ③ HDMI-2 input (HDMI 19 pin) ④ HDMI-1 input (HDMI 19 pin) ⑤ DisplayPort-2 Input (D.
Quick Installation 1. Connect either VGA, DVI, HDMI or DisplayPort Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with DisplayPort and HDMI cables only. DVI-dual link, or VGA cable may be sourced separately from a cable supplier.
Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED LCD Monitor will show a “Power Button Locked” message for 3 seconds and the message will disappear automatically.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Pr ess the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Pr ess 2 to confirm or reach the next sub -menu.
Picture: To manually adjust the Picture Format, Cont rast, Brightness, Sharpness, Over Drive and ECO Mode of screen image. • Picture Format: To select the video mode from 16:9, 4:3 or 1:1. • Contrast: To adjust the foreground white level of screen image.
PiP/PbP: PiP/PbP button allows you to watch two scr eens from different sources at the same time. (PiP is picture in picture; PbP is picture by picture) • PiP/PbP Mode: Toggle to enable/disable PiP/PbP function. • Main Input: Identifies main source (greyed out) • Sub Win1 Input: To select input source for sub-screen.
In PbP Mode 2PbP. Splits the screen left and right equally. In order to achieve full screen on each side, recommended resolution is 1920 x 2160; however, this is a custom resolution. Check your video card to see if custom resolution is supported. If not supported, black bars on top and bottom will result.
Audio Adjust: To adjust the audio functions. • Volume: To adjust the volume of speaker output. • Mute: To turn the Mute ON/OFF. • Aud io S ou rce: Default is main sour ce, but can be manually switched in P iP and PbP mode.
Color: To select the color for improving brightness and color saturation between Warm, Normal, Cool, User Define, Preset Mode, and Blue Light Reducer. • Warm: Adds green to screen image for a darker color. • Normal: Adds red to screen image for warmer white and richer red.
Language: Allows user to choose from available languages. OSD Settings: To manually adjust the Horizontal and Vertical OSD position, Transparency and OSD Time Out. • Horizontal: To horizontally adjust the OSD position. • Vertical: To vertically adjust the OSD position.
Setup Menu: To set up Auto, H./ V. Position, Phase, Clock, DisplayPort, Reset and Information. • Auto: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. • H. Position: To adjust the horizontal position of the screen.
Supporting Timing Modes STANDARD RESOLUTION STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VESA 1280 x 1024 @ 75Hz VGA 640 x 480 @ 60Hz VESA 1440 x 900 @ 60Hz MAC 640 x 480 @ 67Hz VESA 1440 x 900 @ 75Hz VES.
Technical Information Panel 28” TFT (w ith LED bac kli ght ) Power Management On: 45 Watts (typical), 75 Watts (maximum) Standby Mode: < 1.2 Watt (USB 3.0) Off: < 0.5 Watt Displayable Resolution UHD 3840 x 2160 max. Vertical Frequency 60Hz max.
Wall-Mount Installation Instructions Pr eparing to Install the Optional W all Mount Arm (not included) This LED L CD Monitor can be attached to a wall mounting arm purchased separat ely . T urn the power OFF then disconnect the cables from the LED L CD Monitor befor e per f orming the procedur e below .
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.
24 Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.
2014 020-1265-00B 2001132444T.
An important point after buying a device Planar X2850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar X2850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar X2850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar X2850 you will learn all the available features of the product, as well as information on its operation. The information that you get Planar X2850 will certainly help you make a decision on the purchase.
If you already are a holder of Planar X2850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar X2850.
However, one of the most important roles played by the user manual is to help in solving problems with Planar X2850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar X2850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
