Instruction/ maintenance manual of the product 893104 ParaBody
Go to page of 13
893104 PRO SYSTEM Part # 6817401 Revision:6/8/99 1 ASSEMBL Y INSTRUCTIONS.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the Parabody 893104 PRO SYSTEM. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 P AR TS LIST 3 PA R T # 6816103 6815703 6815203 6814803 6815003 6816302 6798103 6801102 6275302 6274402 6807602 6807702 6546302 6812402 6194601 3116201 3116101 6816401 6692601 3103102 6140701 640520.
4 FIGURE 3 STEP 3: • LOOSEL Y assemble the FRONT UPRIGHTS (5) to the UPRIGHT SUPPOR T (4) using four 1/2 X 4” BOL TS (37), four 1/2” W ASHERS (43), and four 1/2” LOCKNUTS (44) as shown in FIGURE 3. • Insert four 2” SQ. END CAPS (22) & two 3 X 2” END CAPS (19) to the ends of the FRONT UPRIGHTS (5) as shown in FIGURE 3.
5 • LOOSEL Y assemble the FOOT PLA TE (6) and the UPRIGHT FRAME (2) to the UPRIGHT SUPPOR T (4) using two 1/2” X 3-1/4” BOL TS (36) and two 1/2” LOCK NUTS (44) as shown in FIGURE 4. FIGURE 4 STEP 4: 44 2 4 1/2 X 3-1/4” 36 22 13 5 • Slide the CARRIAGE (13) over the UPRIGHT FRAME (2) as shown in FIGURE 4.
6 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 5 STEP 5: • LOOSEL Y assemble the UPPER CROSS SUPPOR T (7) to the top set of holes of the FRONT UPRIGHTS (5) as shown in FIGURE 5 using two 1/2 X 3” BOL TS (35), two 1/2” W ASHERS (43), and two 1/2” LOCK NUTS (44).
7 FIGURE 6 STEP 6: • Attach six 3-1/4 X 1-3/4” GLIDES (26) to the LEFT & RIGHT SAFETY RAILS (11 & 12) as shown in FIGURE 6, using the following steps: • Thoroughly clean all surfaces where the 3-1/4 X 1-3/4” GLIDES (26) are to be attached.
8 STEP 8: FIGURE 8 STEP 9: FIGURE 9 • LOOSEL Y assemble the TOP BOOM (1) to the UPRIGHT FRAME (2) using one 1/2 X 2-1/2” BOL TS (34), one 1/2 X 3” BOL T (35), two 1/2” W ASHERS (43), and one 1/2” LOCK NUT (44) as shown in FIGURE 8. • Insert one 3 X 2” END CAP (19) into the end of the TOP BOOM (1).
9 STEP 10: FIGURE 10 • Route one CABLE (18) through the TOP BOOM (1) as shown in FIGURE 10. (NOTE: Make sure CABLE is routed over bolt! ) • SECUREL Y assemble three 3-1/2” PULLEYS (16) into the .
STEP 1 1: FIGURE 1 1 42 • Place one 3-1/2” PULLEY (16) into the loop of the CABLE (18) below the second and third PULLEY of the TOP BOOM (1) as show n in FIGURE 11.
• W rap the CABLE (18) around one 3-1/2” PULLEY (16) and LOOSEL Y assemble it to the 3/16 X 1-3/4 X 5-1/4” PLA TES (28) using one 3/8 X 2” BOL T (31), two 3/8” W ASHERS (40), and one 3/8” LOCK NUT (42).
12 FIGURE 14 STEP 14: FIGURE 15 STEP 15: • SECUREL Y assemble the CABLE (18) to the plate on the UPRIGHT FRAME (2) using one 3/8 X 1-1/4” BOL T (30), two 3/8” W ASHERS (40), and one 3/8” LOCK NUT (42).
13 STEP 16: FIGURE 16 Thank you for purchasing the Parabody 893104 PRO SYSTEM. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. • Attach the LA T BAR (9) to the ball end of the upper CABLE (18) using one 5/16” SNAP HOOK (47) as shown in FIGURE 16.
An important point after buying a device ParaBody 893104 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 893104 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 893104 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 893104 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 893104 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 893104, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 893104.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 893104. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 893104 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
