Instruction/ maintenance manual of the product 832102 ParaBody
Go to page of 14
832102 LEG PRESS Part # 6763901 Rev . A V ersion: 832102 Revision: 06/27/01 1 ASSEMBL Y INSTRUCTIONS.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the Parabody 832102 LEG PRESS. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 P A R TS LIST PA RT # 6574503 6573603 6655701 6575403 6573903 6476403 6575102 6597402 6574001 3103102 31 16201 6177001 6405201 6416601 6467001 6500601 3102501 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15.
4 FIGURE 1 STEP 1: • SECURELY assemble the REAR TUBE (3) to the BASE FRAME (1) using two 3/8 X 3” BOLTS (25), four 3/8” FLAT WASHERS (17), and two 3/8” LOCK NUTS (19). See FIGURE 1. 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Attach two 2” SQ. COVER CAPS (15) onto the ends of the REAR TUBE (3) as shown in FIGURE 1.
FIGURE 2 STEP 2: • SECURELY assemble one 3/8” SPRING PIN (33) to the spring pin barrel on the SEAT FRAME (2) as shown in FIGURE 2. • Insert two 2” SQ.
6 STEP 3: FIGURE 3 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Attach four PARAGLIDE STRIPS (14) to the outside of the ADJUSTMENT TUBE (7) using the following steps: • Thoroughly clean all surfaces where the PARAGLIDE STRIPS (14) are to be attached.
7 STEP 4: FIGURE 4 • CAREFULLEY slide the ADJUSTMENT TUBE (7) over into the SEAT FRAME (2) and engage the SPRING PIN into one of the adjustment holes. See FIGURE 4. 7 2 SPRING PIN FIGURE 5 STEP 5: • Insert two 3/4” FLANGE BEARINGS (31) into each of the two LEVER TUBES (5) as shown in FIGURE 5.
8 STEP 6: FIGURE 6 17 5 5/16” SET SCREW 32 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 1 9 • SECURELY assemble the LEVER TUBES (5) to the BASE FRAME (1) using two 3/4” SHAFTS (9) and SECURE in place using four 5/16” SET SCREWS (32). See FIGURE 6. • Insert four 2” SQ.
9 STEP 7: FIGURE 7 1 30 5 4 13 • Insert four 2” SQ. END CAPS (13) into the ends of FOOT PLATE (4) as shown in FIGURE 7. • Insert eight 1/2” FLANGE BEARING (30) into the LEVER TUBES (5) as shown in FIGURE 7.
10 FIGURE 8 STEP 8: • SECURELY assemble the FOOT PLATE (4) to the LEVER TUBES (5) using two 1/2 X 6-1/2” BOLTS (28) and two 1/2” LOW HEIGHT LOCK NUTS (22) as shown in FIGURE 8.
FIGURE 9 STEP 9: 11 27 1/2 X 3-1/4” 2 21 5 • SECURELY assemble the SEAT FRAME (2) to the LEVER TUBES (5) using two 1/2 X 3-1/4” BOLTS (27) and two 1/2” LOCK NUTS (21) as shown in FIGURE 9.
STEP 10: FIGURE 10 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the SEAT PAD (8) to the HANDLE (6) and the SEAT FRAME (2) using two 3/8 X 1-1/2” BOLTS (23), two 3/8” LOCK WASHERS (18), and two 3/8” FLAT WASHERS (17). See FIGURE 10.
13 STEP 11: FIGURE 11 • SECURELY assemble the SEAT PAD (8) to the SEAT FRAME (2) using two 3/8 X 2-3/4” BOLTS (24) and two 3/8” LOCK WASHERS (18) as shown in FIGURE 11. • Slide two 1 X 8” GRIPS (10) over each HANDLE (6) as shown in FIGURE 11.
14 STEP 12: FIGURE 12 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • To adjust the SEAT, sit in the LEG PRESS, gently press against the FOOT PLATE and pull back on the SPRING PIN.
An important point after buying a device ParaBody 832102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 832102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 832102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 832102 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 832102 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 832102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 832102.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 832102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 832102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
