Instruction/ maintenance manual of the product 829102 ParaBody
Go to page of 9
Serious I II 829102 LEG CURL/EXTENSION I I I I / / I I ASSEMBLY INSTRUCTIONS Part # 6668901 Revision: 09/12/97.
Please note: * Thznk you for purchasing the Parabody 829102 Leg Curl/Extension. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water.
PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART #"’ DESCRIPTION,.’ 6259103 FRONT SUPPORT TUBE, 6625402 BACK. PAD ADJUST TUBE 6625502’ BACK PAD SUPPORT’~-BE 6216~02’ 1-3/.
STEP 1: STEP 2: Insert four PARABODY LOGO END CAPS (37) into the ends of REAR BASE LEG (12) and FRONT BASE SUPPORT (1). See FIGURE Slide two 1-I/4 x 5" GRIPS (36) over tubes on REAR.
STEP 6:Securely assemble RIGHT (9) & I.EFT (10) LEG EXT HANDLES to LEG FRAME (11) using two 3/8 X 4" BOLTS (21), four 3/8" FLAT WASHERS, and two 3/8" LOW HEIGHT NYLOCK NUTS (27). See FIGURE STEP 7:Insert two 3 X 2" END CAPS (29) into the leg fi:ame as shown in FIGURE 5.
STEP 10: Securely assemble BACK PAD ADJUST TUBE (2) & BACK PAD SUPPORT TUBE (3) to LEG FRAME (11) using one 1/2 BOLT (23) and one 1/2" LOW HEIGHT NYLOCK NUT (26). (NOTE: SECURELY TIGHTEN BOLT THEN BACK NUT OFF 1/4 TURN TO ALLOW THE TWO PARTS TO ROTATE FREELY.
STEP 13: Slide two H]NGE TABS (31) over posts LEG FRAME (I 1). See FIGURE 11. FIGURE 11 (~ STEP 14: Securely attach the SEAT PAD (8) to the HINGE TABS (31) using two 3/8 X BOLTS (19) and two 3/8" FLAT WASH- ERS (24).
STEP 16: Attach eight 1-1/2" X 3/4" GLIDES (33) to ROLI.ER PAD ADJUSTER (4) and attach eight 1-1/2" X 3/4" GLIDES (33) to 13-1/2" ROLLER PAD ADJUSTER (5) as shown in FIGURE 14.
STEP 20:Insert two 1/2" FLANGE BEARINGS (34) into the LEG CUR/JEXTENSION (6). See FIGURE 17. STEP 21:Securely assemble LEG CURL/EX- TENSION (6) to LEG FRAME (11) using one 1/2 X 4" BOLT (22) and one 1/2" LOW HEIGHT NYLOCK NUT (26). (NOTE: SECIYRELY TIGHT- EN BOLT THEN BACK NUT ,OFF 1/4 TURN TO ALLOW THE PART , TO ROTATE FREELY.
An important point after buying a device ParaBody 829102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 829102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 829102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 829102 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 829102 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 829102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 829102.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 829102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 829102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
