Instruction/ maintenance manual of the product 822 ParaBody
Go to page of 9
1 822 ADJUST ABLE SIT -UP BENCH CLASS H PAR T # 7303801 REV . A Revision: 06/18/02 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product.
THERE IS A RISK ASSU MED BY IND IVIDUALS W HO USE T HI S TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULE S ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 822 Adjustable Sit-up Bench. Please read these instructions thoroughly and keep them for future reference. 3 NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOL T .
P A R TS LIST DESCRIPTION FRONT BASE SUPPOR T TUBE MAIN P AD SUPPOR T BASE P AD ASSEMBL Y 3/4 X 16” TUBE ROLLER P AD 3/8” W ASHER 3/8” LOCK W ASHER KEY 10 11 12 13 14 15 16 17 18 PA R T # 311470.
16 5 STEP 2: • Insert two 2” SQ. END CAPS (16) into the ends of the BASE (4) as shown in FIGURE 2. 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 2 • SECUREL Y assemble the P AD (5) to the MAIN P AD SUPPOR T (3) and BASE (4) using two 3/8” X 2-3/4” BOL TS (1 1), two 3/8” LOCK W ASHERS (9), two 3/8” W ASHERS (8).
STEP 4: FIGURE 4 STEP 5: FIGURE 5 6 7 6 15 3 1 • Pull back the SPRING PIN and CAREFULL Y slide the MAIN P AD SUPPOR T (3) over the FRONT BASE SUPPOR T (1) as shown in FIGURE 5. • Slide the four ROLLER P ADS (7) onto the MAIN P AD SUPPOR T (3) using two 3/4 X 16” TUBES (6), and four ST ARLOCK COLLARS (13) as shown in FIGURE 4.
MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 7 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water .
8 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED W ARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody .
INTERNA TIONAL OFFICES LifeFitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 LifeFitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 LifeFitness (UK) Ltd.
An important point after buying a device ParaBody 822 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 822 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 822 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 822 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 822 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 822, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 822.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 822. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 822 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
