Instruction/ maintenance manual of the product 441101 440 ParaBody
Go to page of 10
441 101 440 LEG PRESS ADAPTER KIT Part # 7039101 REV . B Revision: 07/19/01 1 ASSEMBLY INSTRUCTIONS W ARNING: Read and follow all directions for each step to insure proper assembly of this product.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: IMPORTANT NOTES 1. Consult your physician before beginning any exercise program. Please note: Tools Required for Assembly * Thank you for purchasing the Parabody 441 101 Leg Press Adapter Kit.
FIGURE 1 STEP 1 • Slide two COVER CAPS (7) over the FRONT LEG (1) as shown in FIGURE 1 1 7 PARTS LIST 3 PA RT # 6686608 6693902 6694002 6694208 31 16201 6405201 6467001 3108102 6140701 KEY 1 2 3 4 5.
FIGURE 4 FIGURE 5 1 4 1/2 X 3-1/4” 15 12 STEP 4 • Securely fasten the FRONT LEG (1) and the BASE CONNECTION (4) to the 440 HOME GYM using two 1/2 X 3-1/4” BOL TS (15) and two 1/2” LOCKNUTS (12).
FIGURE 7 FIGURE 6 STEP 6 • Attach CABLE SWIVEL (3) to the ADJUSTMENT TUBE on the 100 LEG PRESS using the existing previously removed 3/8 X 4-1/2” BOL TS, W ASHERS, 2” WHEELS AND NUT . (Note: Securely tighten, then back off 1/4 turn to allow the CABLE SWIVEL & WHEELS to rotate freely .
6 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 8 Remove the existing LA T CABLE using the following steps: • Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY. • Route the LAT CABLE around the PULLEY BLOCK as shown in FIGURE 8. REMOVE CABLE FIGURE 8 • The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
7 STEP 9 Install the NEW 1 10-3/4” CABLE ASSY (16) using the following steps: • Route the CABLE (16) back over one pulley in the TOP BOOM, down through the PULLEY BRACKET (2) and over the second pulley in the TOP BOOM. • Route the CABLE (16) around the PULLEY BLOCK as shown in FIGURE 9.
FIGURE 11 STEP 11 • Attach the hook end of 82-1/2” CABLE (17) to the CABLE SWIVEL (3) with one QUICK DISCONNECT LINK (8). IMPORTANT: Tighten the QUICK DISCONNECT LINK (8) securely. 8 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Route the 82-1/2” CABLE (17) under the WEIGHT STACK as shown in FIGURE 11.
FIGURE 13 FIGURE 12 STEP 12 • Screw the threaded end of 82-1/2” CABLE (17) to the PULLEY BRACKET (2) as shown in FIGURE 12. STEP 13 • Attach one 3-1/2” PULLEY (5) to the FRONT LEG (1) and one 3-1/2” PULLEY (5) to the BASE CONNECTION (4) using two 3/ 8 X 1-3/4” BOL TS (13) and two 3/8” LOCKNUTS (11).
FIGURE 14 STEP 14 • The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit from the machine.
An important point after buying a device ParaBody 441101 440 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 441101 440 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 441101 440 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 441101 440 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 441101 440 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 441101 440, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 441101 440.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 441101 440. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 441101 440 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
