Instruction/ maintenance manual of the product 435104 ParaBody
Go to page of 13
435104 LEG PRESS ADAPTER KIT Part # 6865101 Revision: 2/15/00 1 ASSEMBL Y INSTRUCTIONS.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the 435104 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
STEP 1 FIGURE 1 PA R T # 6747603 3116202 3108102 6427101 3118701 3201501 6271801 6747901 KEY 1 2 3 4 5 6 7 8 QTY 1 2 1 1 1 1 1 1 PA RT # 3102701 3102501 3102802 3102502 3102801 3102902 3102910 3102909.
STEP 2 FIGURE 2 4 REAR SHROUD • If the 445104 SECOND ST ACK OPTION is not installed, the rear SHROUD opening must be removed. Apply pressure to the bottom of the SHROUD where the “V” groove is and carefuly remove the weight stack opening on the SHROUD as shown in FIGURE 2.
FIGURE 3 STEP 3 • Remove two 3/8” LOCK NUTS, two 3/8” HEX NUTS, two SWIVEL SNAP (68) (keep elastic cords attached), two 3/8 X 1/2” SP ACERS, and one 3/8” THREADED SHAFT from the bracket on the BASE as shown in FIGURE 3. BASE 5 HEX NUT • Discard the two 3/8 X 1/2” SP ACERS.
6 FIGURE 4 BASE HEX NUT 3/8” LOCK NUT 2 STEP 4 • Assemble the two previously removed 3/8” HEX NUTS, two previously removed SWIVEL SNAPS, one 3-1/2” PULLEY (2), and two previously removed 3/8” LOCK NUTS to the previously removed 3/8” THREADED SHAFT as shown in FIGURE 4.
FIGURE 7A (WITHOUT 445104 SECOND ST ACK OPTION) STEP 7A 3/8” LOCK NUT TOP BOOM 9 3/8” HEX NUT • SECUREL Y assemble one 2” PULLEY (5) to the 3/8” THREADED SHAFT on the T OP BOOM using one previously installed 3/8” W ASHER, one 3/8” HEX NUT (9) and one previously installed 3/8” LOCK NUT as shown in FIGURE 7A.
FIGURE 7B (WITH 445104 SECOND ST ACK OPTION) STEP 7B • If the 445104 SECOND ST ACK OPTION is NOT installed proceed to STEP 8 . TOP BOOM 3/8” X 1” 16 10 5 11 3/8” LOCK NUT • SECUREL Y assembl.
9 STEP 9 FIGURE 9 • Route LEG PRESS CABLE (8) around the 3-1/2” PULLEY on the LEG PRESS and UNDER the 3-1/2” PULLEY on the FRONT LEG (1) as shown in FIGURE 9. • SECUREL Y attach the LEG PRESS to the FRONT LEG (1) using two 1/2” X 3” BOL TS (15), two 1/2” W ASHERS (12), and two 1/2” LOCK NUTS (13).
10 FIGURE 10 STEP 10 • SECUREL Y attach the FRONT LEG (1) to 425 BASE using two 1/2 X 3” BOL TS (15), two 1/2” W ASHERS (12) and two 1/2” LOCK NUTS (13). See FIGURE 10. • Route LEG PRESS CABLE (8) under the 3-1/2” PULLEY on the 425 BASE as shown in FIGURE 10.
11 STEP 1 1 D E T A I L 1 1 FIGURE 1 1 SEE DET AIL 1 1 LEG CABLE LA T CABLE PRESS CABLE D-RING • Run the LEG PRESS CABLE through the correct hole on the d-ring and attach one KEYHOLE CLEVIS to the end of the LEG PRESS CABLE. See FIGURE 1 1 & DET AIL 1 1.
12 STEP 12 • Assemble the 72” ELASTIC CORD (7) from the LEG PRESS CABLE (8) around the 2” PULLEY (5) in the TOP BOOM as shown in FIGURE 12. FIGURE 12 TOP BOOM 7 5 LEG PRESS CABLE 8 FIGURE 13 STEP 13 • Assemble the ELASTIC CORD(7) from the LEG PRESS CABLE to the corresponding SWIVEL SNAP (6) on the BASE as shown in FIGURE 13.
STEP 14 FIGURE 14 13 • SECUREL Y attach the four previously removed 3/8 X 1” BUTTON HEAD CAP SCREWS to the rear SHROUD. See FIGURE 14. Thank you for purchasing the Parabody 435104 Leg Press Adapter Kit. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
An important point after buying a device ParaBody 435104 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 435104 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 435104 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 435104 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 435104 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 435104, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 435104.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 435104. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 435104 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
