Instruction/ maintenance manual of the product 415101 ParaBody
Go to page of 10
Serious Steel 415101 400 LEG PRESS ADAPTER KIT ASSEMBLY INSTRUCTIONS Part# 6694601 II Revision: 06/12/97.
]IMPORTANT NOTES[ There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: 1. Consult your physician before beginning any exercise program. 2. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
3 4 5 6 7 8 9 PART # DESCRIPTION 6686603 FRONT LEG 6693902 PULLEY BRACKET CABLE SWIVEL 6694002 6694203 3116201 6405201 6467001 3108102 6140701 BASE CONNECTION 3-1/2" PULLEY 2" SQ.
1/2X3’1/4" FIGURE 4 STEP 4 ¯ Securely fasten the FRONT LEG (1) and the BASE CONNECTION (4) to the 400 HOME GYM using two 1/2 X 3-1/4" BOLTS (15) and two 1/2" LOCKNUTS (12).
STEP 6 ¯ Attach CABLE SWIVEL (3) to the ADJUSTMENT TUBE on the 832 using the existing previously removed 3/8 X 4-1/2" BOLTS, WASHERS, 2" WHEELS AND NUT. (Note: Securely tighten, then back off 1/4 turn to allow the CABLE SWIVEL & WHEELS to rotate freely.
FIGURE 8 REMOVE STEP 8 Remove the existing LAT CABLE (part #668701) using the following steps: ¯ Discolmect LAT BAR from TOP BOOM. ¯ Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY. ¯ Route the LAT CABLE around the PULLEY BLOCK as shown in FIGURE 8.
FIGURE 9 Cable must run over the top of bolts. Loop CABLE (16) around one 3-1/2" PULLEY (5) in the PULLEY BRACKET (2) using on 3/8 X 1-3/4" BOLT (13) and 3/8" LOCKNUT (11) as shown in FIGURE 10. STEP 10 Screw the threaded end of CABLE (16) into the HEAD PLATE ASSEMBLY.
FIGURE 11 IMPORTANT: Tighten QUICK DISCONNECT LINK SECURELY. STEP 11 ¯ Attach the hook end of 82-1/2" CABLE (17) to the CABLE SWIVEL (3) with one QU]:CK DISCONNECT LINK IMPORTANT: Tighten the QUICK DISCONNECT LINK (8) securely. ¯ Route the 82-1/2" CABLE (17) under the WEIGHT STACK as shown in FIGURE 11.
STEP 12 o Screw the threaded end of 82-1/2" CABLE (17) to the PULLEY BRACKET (2) as shown in FIGURE 12. FIGURE 12 3/8X1-3/4" FIGURE 13 STEP 13 ¯ Attach one 3-1/2" PULLEY (5) to the FRONT LEG (1) and one 3-1/2" PULLEY (5) to the BASE CONNECTION (4) using 3/8 X 1-3/4" BOLTS (13) and two 3/8" LOCKNUTS.
SPRING PIN ADJUSTMENT FIGURE 14 STEP 14 The 832 LEG PRESS is equipped with a springpin adjustment to acconunodate differen! sized users and allow easy entry and exit from the machine. To use, you must slightly push against the foot plates to take tension off the pin.
An important point after buying a device ParaBody 415101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 415101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 415101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 415101 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 415101 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 415101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 415101.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 415101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 415101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
