Instruction/ maintenance manual of the product 360101 ParaBody
Go to page of 11
360101 375 LEG PRESS ADAPTER KIT Part # 6837701 Revision: 07/06/99 1 ASSEMBL Y INSTRUCTION.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: IMPORTANT NOTES 1. Consult your physician before beginning any exercise program. Please note: Tools Required for Assembly * Thank you for purchasing the Parabody 360101 Leg Press Adapter Kit.
FIGURE 1 STEP 1 • Slide two 2” SQ. COVER CAPS (6) over the FRONT LEG (1) as shown in FIGURE 1. 1 6 PARTS LIST 3 PA R T # 6838003 6693902 6838103 3116201 6405201 6467001 6832701 3102501 KEY 1 2 3 4.
FIGURE 4 STEP 4 • Remove two 1/2 X 4” BOL TS, two 1/2” W ASHERS, and two 1/2” LOCK NUTS from the BASE and ST ACK GUARD as shown in FIGURE 4. (NOTE: Discard the 1/2 X 4” BOL T .
5 STEP 6 Remove the existing CABLE (part #68331) using the following steps: • Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY. • Route the CABLE around the FLOA TING PULLEY as shown in FIGURE 6. REMOVE CABLE • The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
6 STEP 7 Install the NEW PRIMAR Y CABLE (13) using the following steps: • Route the CABLE (13) back over one pulley in the GUIDE ROD SUPPOR T , down through the PULLEY BRACKET (2) and over the second pulley in the GUIDE ROD SUPPOR T . • Route the CABLE (13) around the FLOA TING PULLEY BRACKET as shown in FIGURE 7.
FIGURE 8 7 STEP 8 • Loop CABLE (13) around one 3-1/2” PULLEY (4) in the PULLEY BRACKET (2) and SECUREL Y assemble using one 3/8 X 2” BOL T (10), and two 3/8” W ASHERS (8) and one 3/8” LOCK NUT (9) as shown in FIGURE 8.
8 FIGURE 10 STEP 10 • Assemble the LEG PRESS CABLE (14) to the ADJUSTMENT TUBE on the 832 using the existing previously removed 3/8 X 4-1/2” BOL TS, SP ACERS, W ASHERS, 2” WHEELS AND NUT . (Note: Do not overtighten! T ighten only until nut is completely on bolt.
FIGURE 1 1 STEP 1 1 • Securely fasten the 832 LEG PRESS to the FRONT LEG (1) using two 1/2 X 3” BOL TS (1 1), two 1/2” W ASHERS (15), and two 1/2 ” LOCK NUTS (16) as shown in FIGURE 11.
10 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 12 STEP 12 • Attach one 3-1/2” PULLEY (4) to the FRONT LEG (1) and one 3-1/2” PULLEY (4) to the BASE CONNECTION (3) using two 3/8 X 2” BOL TS (10), four 3/8” W ASHERS (8) and two 3/8” LOCKNUTS (9).
FIGURE 14 STEP 14 • The 832 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit from the machine. T o use, you must slightly push against the foot plates to take tension of f the pin.
An important point after buying a device ParaBody 360101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 360101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 360101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 360101 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 360101 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 360101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 360101.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 360101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 360101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
