Instruction/ maintenance manual of the product 216 ParaBody
Go to page of 5
1 216 50 LB. ADD-ON KIT ASSEMBL Y INSTRUCTIONS W ARNING: Read and follow all directions for each step to insure proper asembly of this product. CLASS H PAR T # 7016801 REV .
P AR TS LIST PA R T # 6939201 7095801 KEY 1 2 QTY 5 1 KEY 3 4 PA R T # 6978101 6382301 DESCRIPTION WEIGHT ST ACK LABEL WEIGHT PLA TE BUSHINGS (10 CT) QTY 1 1 DESCRIPTION WEIGHT PLA TE WEIGHT ST ACK SHAFT FIGURE 1 • Insert two WEIGHT PLA TE BUSHINGS (4) into each of the five WEIGHT PLA TES (1) as shown in FIGURE 1.
3 FIGURE 2 • Unscrew the WEIGHT ST ACK CABLE from the 15 HOLE WEIGHT ST ACK SHAFT as shown in FIGURE 2. STEP 2: WEIGHT ST ACK PIN WEIGHT ST ACK CABLE 15 HOLE WEIGHT ST ACK SHAFT • Remove the WEIGHT ST ACK PIN from the 15 HOLE WEIGHT ST ACK SHAFT as shown.
4 • Remove the E-RING and the old WEIGHT ST ACK SHAFT from the HEAD PLA TE. (NOTE: Please discard the old WEIGHT ST ACK SHAFT .) FIGURE 4 STEP 4: • Slide the new 20 HOLE WEIGHT ST ACK SHAFT (2) thru the hole in the HEAD PLA TE and lock in place using the previously removed E-RING as shown in FIGURE 4.
• TIGHTEN cable jam nut securely! 5 FIGURE 6 STEP 6: WEIGHT ST ACK PIN WEIGHT ST ACK CABLE 20 HOLE WEIGHT ST ACK SHAFT • Assemble the WEIGHT ST ACK PIN to the 20 HOLE WEIGHT ST ACK SHAFT as shown. • Screw the WEIGHT ST ACK CABLE into the 20 HOLE WEIGHT ST ACK SHAFT of the HEAD PLA TE until the CABLE slightly pulls on the HEAD PLA TE.
An important point after buying a device ParaBody 216 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 216 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 216 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 216 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 216 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 216, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 216.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 216. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 216 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
