Instruction/ maintenance manual of the product VE248Q Asus
Go to page of 22
VE248Q/VE228Q LED Monitor U ser G uide.
ii E6235 First Edition April 2011 Copyright © 201 1 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmi.
iii Contents Notices ......................................................................................................... iv Safety information ....................................................................................... v Care & Cleaning .
iv Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
v Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent re or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
vi Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
vii Wheretondmoreinformation Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products.
1-1 ASUS VE248Q/VE228Q Series LED Monitor 1.1 Welcome! Thank you for purchasing the ASUS ® LED monitor! The latest widescreen LED monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience.
1-2 Chapter 1: Product introduction 1.3 Monitor introduction 1.3.1 Front view 1 2 6 4 3 5 1. button: Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD • menu is active.
1-3 ASUS VE248Q/VE228Q Series LED Monitor Selects an available input source. • 6. Power button/power indicator Turns the monitor on/off. • The color definition of the power indicator is as the below table. • Status Description Blue ON Amber Standby mode OFF OFF 1.
1-4 Chapter 1: Product introduction.
2-1 ASUS VE248Q/VE228Q Series LED Monitor 2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Assemble the base and the arm by aligning the arrow marks on the base and the arm. 3.
2-2 Chapter 2: Setup 2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes.
2-3 ASUS VE248Q/VE228Q Series LED Monitor 2.4 Connecting the cables 1. Connect the cables as the following instructions: VE248Q VE228Q VGA HDMI Earphone jack Audio-in Display port To connect the audio cable: • connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port.
2-4 Chapter 2: Setup 2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.
3-1 ASUS VE248Q/VE228Q Series LED Monitor 3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Press the MENU button to activate 1. the OSD menu. Press 2. , and t o navigate through the functions. Highlight the desired function and press the MENU button to activate it.
3-2 2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., and Skin Tone from this menu. Brightness • : the adjusting range is from 0 to 100. is a hotkey to activate this function. Contrast • : the adjusting range is from 0 to 100.
3-3 ASUS VE248Q/VE228Q Series LED Monitor 4. Input Select In this function, you can select your desired input source. 5. System Setup Allows you to adjust the system. Splendid Demo Mode • : splits the screen into two for Splendid modes comparison.
3-4 3.2 Specicationssummary(VE248Q) Panel Type TFT LCD Panel size 24" (16:9, 61 cm) wide screen Max. Resolution 1920 x 1080 Pixel pitch 0.2765 mm Brightness (Typ.) 250 cd/m 2 Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.) 50,000,000:1 (with ASCR on) Viewing angle(H/V) CR>10 170˚/160˚ Display colors 16.
3-5 ASUS VE248Q/VE228Q Series LED Monitor Specicationssummary(VE228Q) Panel Type TFT LCD Panel size 21.5" (16:9, 54.6 cm) wide screen Max. Resolution 1920 x 1080 Pixel pitch 0.248 mm Brightness (Typ.) 250 cd/m 2 Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.
3-6 3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON Press the • button to check if the monitor is in the ON mode. Check if the power cord is properly • connected to the monitor and the power outlet. The power LED lights amber and there is no screen image Check if the monitor and the computer are • in the ON mode.
3-7 ASUS VE248Q/VE228Q Series LED Monitor 3.4 Supported operating modes Resolution Frequency Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel (MHz) 640x480 31.5 60 25.18 640x480 35.0 67 30.24 640x480 37.9 72 31.50 640x480 37.5 75 31.50 720x400 31.
An important point after buying a device Asus VE248Q (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus VE248Q yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus VE248Q - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus VE248Q you will learn all the available features of the product, as well as information on its operation. The information that you get Asus VE248Q will certainly help you make a decision on the purchase.
If you already are a holder of Asus VE248Q, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus VE248Q.
However, one of the most important roles played by the user manual is to help in solving problems with Asus VE248Q. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus VE248Q along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
