Instruction/ maintenance manual of the product L461-ID3450 Mitsubishi
Go to page of 40
46" LCD Display Monitor USER’S MANUAL BEDIENERHANDBUCH MANUAL DEL USUARIO MANUEL UTILISATEUR MANUALE UTENTE GEBRUIKERSHANDLEIDING.
English English-1 Important Information ......................................................................................................... .......................... English-2 Safety Precautions, Maintenance & Recommended Use ..............
English-2 DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation.
English English-3 Important Information TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET . TO FULL Y DISENGAGE THE POWER TO THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK).
English-4 • The power cable connector is the primary means of detaching the system from the power supply . The monitor should be installed close to a power outlet, which is easily accessible. • Handle with care when transporting. Save packaging for transporting.
English English-5 Contents * Remember to save your original box and packing material to transport or ship the monitor . Y our new LDT461V monitor box* should contain the following: • LCD monitor •.
English-6 OFF ON EXIT MUTE INPUT Button Location DOWN ( ) button Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSD menu. EXIT button Activates the OSD menu when the OSD menu is turned-off.
English English-7 AC IN connector Connects with the supplied power cord. RGB 1 IN (HDMI 1) T o input digital RGB signals from a computer . * This connector does not support analog input. AUDIO is supported via HDMI. RGB 2 IN (HDMI 2) T o input digital RGB signals from a computer .
English-8 Wireless Remote Contr ol POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. PICTURE MODE button Selects from pictur e mode, [HIGHBRIGHT], [ST ANDARD], [sRGB], [CINEMA].
English English-9 Handling the remote contr ol * Do not subject to strong shock. * Do not allow water or other liquid to splash the remote control. If the r emote control gets wet, wipe it dry immedi- ately . * Avoid exposur e to heat and steam. * Other than to install the batteries, do not open the remote.
English-10 1. Determine the installation location CAUTION: DO NOT A TTEMPT TO INST ALL THE LCD MONITOR BY YOURSELF . Installing your LCD display must be done by a quali fi ed technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.
English English-11 7. Adjust the sound Make adjustments when adjustment of the volume is requir ed. 8. Adjust the screen (See pages 23-31) Make adjustments when adjustment of the screen display position or distortion is requir ed. 9. Adjust the image (See page 23-31) Make adjustments when adjustment such as the brightness or contrast is requir ed.
English-12 14. When LDT461V is installed in portrait position Conditions LDT461V can be installed in portrait position, under the following conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted. The stands(legs) can not be fi tted to the monitor in portrait position.
English English-13 Y ou can attach mounting accessories to the LCD monitor in one of the following two ways: 1. In the upright position 2. Lay the screen face down Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the scr een face.
English-14 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment.
English English-15 Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
English-16 Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1, RGB 2 IN connector accepts a HDMI cable.
English English-17 Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player owner’ s manual for more information.
English-18 Connecting to a Ster eo Ampli fi er Y ou can connect your stereo ampli fi er to your LCD monitor . Refer to your ampli fi er owner's manual for more information. Connect the LCD Monitor to a Stereo Ampli fi er • T ur n on the LCD monitor and the ampli fi er only after all connections have been made.
English English-19 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor , the remote control and the power button will not activate the on mode and both green and r ed power indicator turn off. Be sure to turn the Main Power Switch to the on mode before using these two options.
English-20 Power Indicator Status Power ON Green Power OFF Red Red On Green Blinking Po w er Standby Red, Green Red Blinking * Power Standby when “SCHEDULE” is enable Diagnosis (Detecting failure) See troubleshooting on page 35 Using Power Management The LCD monitor follows the VESA approved DPM Power Management function.
English English-21 Information OSD RGB1, 2, 3, 4 Video Input mode Input signal Information Audio input mode Picture Size mode RGB3 1024 x 768 48kHz 60Hz AUDIO : 1 SIZE : FULL ) DVD/HD Video Input mode.
English-22 OSD (On-Scr een-Display) Contr ols Press MENU button to open Main menu. Press UP or DOWN button to select sub-menu. Press EXIT button to open Main menu. Press UP or DOWN button to select. UP or DOWN button INPUT button Press UP or DOWN, and PLUS or MINUS button to select function, or control which you like.
English English-23 BRIGHTNESS Adjusts the overall image and background scr een brightness. Press + button to incr ease brightness. Press - button to decr ease brightness. CONTRAST Adjusts the image brightness in relation to the input signal. Press + button to incr ease contrast.
English-24 H POSITION Controls Horizontal Image position within the display ar ea of the LCD. Press + button to move scr een to right. Press - button to move scr een to left. V POSITION Controls Vertical Image position within the display area of the LCD.
English English-25 BALANCE Adjust the balance of L/R volume. Press + button to move the ster eo sound image to right. Sound of the left side will be small. Press - button to move the ster eo sound image to left. TREBLE T o accentuate or reduce the high frequency sound.
English-26 AUTO SETUP * : INPUT RGB3,4 only Press "SET" button to automatically adjust scr een size, horizontal position, vertical position, clock, clock phase, white level and black level. Press "EXIT" button to cancel execution AUTO SETUP and then will r eturn to the previous menu.
English English-27 LONG CABLE ON/OFF Selects the LONG CABLE ON/OFF . LONG CABLE MANUAL Adjusts the LONG CABLE setting by increasing or decr easing the value. The preset choices ar e 0 to 100. OSD TURN OFF The OSD control menu will stay on as long as it is use.
English-28 INPUT RESOLUTION * : INPUT RGB3,4 only Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768. AUTO: Determines the resolution automatically .
English English-29 TILING TILING demonstrates multiple screens. This feature provides a single large screen using up to 16 monitors. It will be able to divide up to 4 each H and V. This requires you to feed the PC output into each of the monitors through a distributor.
English-30 NOTE 1: IMAGE PERSISTENCE Please be aware that LCD T echnology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a pr evious image remains visible on the scr een.
English English-31 : Supported : Not supported SUB RGB1 RGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO<S> VIDEO RGB2 RGB3 DVD/HD VIDEO RGB4 VIDEO<S> MAIN PIP SIZE SMALL MIDDLE LARGE : 320 dots X 240 dot.
English-32 Contr olling the LCD monitor via RS-232C Remote Contr ol This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
English English-33 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 600 ms. (2) The LCD monitor will send a return command 600 ms* after it has received and encoded. If the command isn’ t received correctly , the LCD monitor will not send the return command.
English-34 Reduced Footprint: Provides the ideal solution for envir onments requiring superior image quality but with size and weight limitations. The monitor’ s small footprint and low weight allow it to be moved or transported easily from one location to another .
English English-35 T r oubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English-36 No Sound • Check to see if speaker cable is properly connected. • Check to see if mute is activated. • Check to see if volume is set at minimum. Remote Control is not available • Check the Remote Control’ s batteries status. • Check if batteries are inserted correctly .
English English-37 Speci fi cations Speci fi cations (LDT461V) Product Specifications LCD Module Frequency Pixel Clock Viewable Size Input Signal PC-Input: VIDEO Input: AUDIO Input: RS-232C: Output .
English-38 Pin Assignment 1) Analog RGB input (Mini D-SUB 15P): R G B 3 Mini D-SUB 15P 1 Video Signal Red Video Signal Gr een Video Signal Blue GND DDC-GND Red-GND Green-GND Blue-GND +5V (DDC) SYNC-GN.
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Inf or mation T echnologies Group, 4299 14th A venue , Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 F ax :+1-(905) 475-7958 E-mail :projectors@mitsubishielectric.
An important point after buying a device Mitsubishi L461-ID3450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi L461-ID3450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi L461-ID3450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi L461-ID3450 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi L461-ID3450 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi L461-ID3450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi L461-ID3450.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi L461-ID3450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi L461-ID3450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
