Instruction/ maintenance manual of the product 20020107 Masterbuilt
Go to page of 12
TURKEY FR YER WITH TIMER POTS NOT INCLUDED ON ALL MODELS CHECK P ACKAGING FOR DET AILS LP GAS CYLINDER NOT INCLUDED TOOLS NEEDED: ADJUST ABLE WRENCH, PHILLIPS HEAD SCREWDRIVER MODEL NUMBERS 20020107, 20020109, 20020209, 20020407, 20020507 FOLLOWING THESE INSTRUCTIONS WILL ALLOW YOU T O HA VE A SAFE COOKING EXPERIENCE.
1. Never operate this appliance unattended. 2. Never operate this appliance within 10 ft (3m) of any structure, combustible material or other gas cylinder . 3. Never operate this appliance within 25 ft (7.5 m) of flammable liquid. 4. Do not fill cooking vessel beyond maximum fill line.
W ARNING Cooking with Oil or Grease: • Failure to completely thaw and dry foods may cause oil or grease to overflow . When frying with oil or grease, all food products MUST be completely thawed and towel dried to remove excess water .
W ARNING • This Outdoor Gas appliance is for outdoor use only and shall not be used in a building, garage, tent or any other enclosed area. • Never use or operate this appliance on or under any overhead roof covering (car port), awning, overhang, apartment or condominium balcony or deck.
W ARNING Incorrect • Always perform soapy water test every time you use this appliance. • Avoid bumping or impact to the appliance to prevent spillage or splashing of hot liquid. • Always disconnect gas cylinder from appliance when not in use. • Keep hands, hair and face away from burner flame.
W ARNING • The use of alcohol, prescription or non prescription drugs may impair the consumer ’s ability to properly assemble or safely operate the appliance. • Do not obstruct flow of combustion and ventilation. Keep ventilation opening(s) of the cylinder enclosure free and clear of debris.
P ARTS LIST Remove nut (B) from bottom of burner . Place burner onto burner mount bar with burner bolt sticking down through hole in center of burner mount bar . NOTE: Do not over tighten. Threads should line up, do not damage threads by forcing hose into burner .
7 16 Our #1 Asked Question Y ellow Flame No Flame When the cast iron burner burns yellow or not at all, what should I do? If your burner does not burn, blows out, burns yellow , or there’s a flame inside the venturi, you need to check the burner venturi for any obstructions.
Thermometer Safety Check: • Before each use place the thermometer stem in boiling water and ensure that it registers approximately 212ºF +/- 20ºF (100ºC +/-10ºC). If it does not, contact Masterbuilt to order a replacement. • When thermometer is lowered into HOT oil, do not allow it to pierce into the turkey or food.
Regulator Control V alve Soapy W ater T est W arning and Procedures • The Soapy W ater T est must be performed each time gas cylinder is connected to appliance or each time the appliance is used. • The Soapy W ater T est must be performed outdoors in a well-ventilated area.
1. Check the regulator to be certain it is in the OFF position before connecting to the gas cylinder . Perform soapy water test before each use. 2. Open tank cylinder valve. 3. T o start timer operation, push POWER button; both lights will blink once.
11 12 SAFE ST ORAGE & MAINTENANCE • Before each use of the appliance, check and clean the burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire inside or behind the burner or beneath the appliance.
An important point after buying a device Masterbuilt 20020107 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Masterbuilt 20020107 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Masterbuilt 20020107 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Masterbuilt 20020107 you will learn all the available features of the product, as well as information on its operation. The information that you get Masterbuilt 20020107 will certainly help you make a decision on the purchase.
If you already are a holder of Masterbuilt 20020107, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Masterbuilt 20020107.
However, one of the most important roles played by the user manual is to help in solving problems with Masterbuilt 20020107. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Masterbuilt 20020107 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
