EN
Linear logo
Official user manual

Linear Digital Video Recorder (DVS-2408)

48 pages·891 KB·Digital Video Recorder·PDF·ENDEFRITNLJA
Linear Digital Video Recorder (DVS-2408)
Table of Contents 80 sections RA-2400 · REMOTE ACCESS SOFTWARE · FOR TECHNICAL ASSISTANCE CALL: Linear Technical Services: 1-800-421-1587 · 1.1 SOFTWARE DESCRIPTION · … ShowHide
RA-2400p.1REMOTE ACCESS SOFTWAREp.1FOR TECHNICAL ASSISTANCE CALL: Linear Technical Services: 1-800-421-1587p.11.1 SOFTWARE DESCRIPTIONp.31.2 SYSTEM REQUIREMENTSp.4Minimum System Requirements:p.4IBM compatible 486 personal computer with 8 Mb RAMp.4Windows 95/98/NT/ME/XP/2000 operating systemsp.4VGA monitorp.4Name brand modem that is capable of 300 baud (BELL 103p.4compatible)p.4Hard disk drive with 10 Mb available space for the softwarep.4CD drivep.4Recommended System:p.4Pentium or better based personal computer with 16 Mb RAMp.4or morep.4SVGA video cardp.4Microsoft compatible mousep.4Large hard disk drive (1000 Account Profi les use about 20p.4Mb)p.4Compatible Systems Note:p.41.3 PROGRAMMING OUTLINEp.51. SETUP RA-2400 SOFTWAREp.52. CUSTOMIZE AN ACCOUNT PROFILEp.53. PROGRAM THE CONSOLE WITH THE ACCOUNT PROFILEp.5IMPORTANT:p.51.4 PROGRAM INSTALLATIONp.6To Install the Remote Access Program:p.6To Remove the Remote Access Program:p.61.5 TESTING THE MODEMp.7To Test the Modem:p.72. OVERVIEWp.82.1 STARTING THE PROGRAMp.9To Run the Program:p.92.2 NEW WINDOWp.92.3 MENU BARp.10Filep.10NEWp.10OPENp.10CLOSEp.10SAVEp.10PRINT PREVIEWp.10RECENT FILE LISTp.10EXITp.102.3 MENU BAR (CONTINUED)p.11VIEWp.11TOOL BARp.11STATUS BARp.11COMMUNICATIONSp.11OPTIONSp.11CHANGE PASSWORDp.11WINDOWp.11CASCADEp.11TILEp.11HELPp.11CONTENTSp.11ABOUT RA-2400 REMOTE ACCESSp.112.4 ACCOUNT PROFILE WINDOW OVERVIEWp.12MENU TREE EDIT AREAp.123. COMMUNICATIONS SETUPp.133.1 COM PORTp.143.2 SPEAKERp.143.3 CONNECTION OPTIONSp.15CONSOLE LOCAL CABLE CONNECTIONp.15MODEMp.153.4 MODEM INITIALIZATION STRINGp.164. CREATING A CUSTOM ACCOUNT PROFILEp.174.1 NEW WINDOWp.184.2 CUSTOMER INFORMATIONp.19CUSTOMERp.194.3 CONSOLE ACCESS CODESp.20CODE DEFINITIONS:p.204.4 CONSOLE ARM/DISARMp.214.5 CONSOLE ENTRY/EXITp.224.6 CONSOLE ALARMSp.234.7 CONSOLE HOME-AUTOMATION OUTPUTp.244.8 CONSOLE AUDIOp.254.9 SENSORSp.264.9 SENSORS (CONTINUED)p.274.10 COMMUNICATOR MAINp.28
Page 1 of the Linear Digital Video Recorder (DVS-2408) user manual — FOR TECHNICAL ASSISTANCE CALL: Linear Technical Services: 1-800-421-1587
Page 1 · click to enlarge
Page 1

RA-2400

REMOTE ACCESS SOFTWARE

Linear Digital Video Recorder (DVS-2408) — RA-2400 diagram (page 1)
Fig. 1

Reference Manual for Programming the DVS-1200, DVS-2400, DUAL-824 & DVS-2408 Supervised Wireless Security Systems

WRITER’S NOTE: This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Linear may make improvements and/or changes in the product(s) and/or software described in this publication at any time.

MS-DOS®, Windows™, WindowsNT™, Windows95™, Windows98™, WindowsME™, WindowsXP™ and Windows2000™, and are registered trademarks of Microsoft Corporation.

Pentium® is a registered trademark of Intel Corporation.

IBM® is a registered trademark of International Business Machines Corporation.

FOR TECHNICAL ASSISTANCE CALL: Linear Technical Services: 1-800-421-1587

Page 2 of the Linear Digital Video Recorder (DVS-2408) user manual — RA-2400
Page 2 · click to enlarge
Page 2
Page 2 of the Linear Digital Video Recorder (DVS-2408) user manual — RA-2400
Page 3 of the Linear Digital Video Recorder (DVS-2408) user manual — 1.1 SOFTWARE DESCRIPTION
Page 3 · click to enlarge
Page 3

1.1 SOFTWARE DESCRIPTION

What is the RA-2400 Remote Access Software?

The RA-2400 Remote Access software is a communications program designed to work with Linear’s DVS Supervised Wireless Security Systems and other Linear products. The software runs on an IBM PC or compatible computer and connects to the console through the standard telephone network, or to the Console directly, with the computer’s modem. This 32-bit software runs under all Windows operating systems.

RA-2400 sets the options for: Console access codes, exit/entry delays, alarm, audio, and sensors; communicator telephone numbers, call routing, formats, reporting codes, account numbers, and other options.

The RA-2400 software has a large help fi le that can be accessed at any time by selecting “Contents” from the “Help” menu or by pressing the F1 key.

How does RA-2400 connect to a DVS Console?

Remote Access communicates with the Console over the same phone line the Console uses to send communicator reports. Remote Access can also connect to the Console without a telephone line by directly connecting the Computer modem’s LINE jack to the Console’s T & R Terminals using a telephone cord.

With a telephone line connection (remote connection), a special dialing procedure is used. First, Remote Access dials the phone number specifi ed for the Console. Remote Access waits long enough for the phone to ring two or three times, then hangs up. Next, Remote Access waits, then dials again. This second call is answered on the fi rst ring by the Console.

With a direct connection (local cable connection), Remote Access prompts the user to place the Console in Test Mode and press the Console’s EMERGENCY button to establish the connection.

Once the connection is made, the Console will check if its remote access password matches the calling software’s password. If the passwords match, access is granted.

Do I have to be connected to a Console to make programming changes?

Since Remote Access knows the programming structure, you can modify an Account Profi le without being connected to a Console. This means you can set all of the values for a specifi c Console confi guration and then connect to a unit and send all of the values that you have set. This is referred to as off-line Console confi guration.

How do I change Console settings while on-line?

While on-line with the Console, make any changes to the Account Profi le then send the data to change the Console.

Can I make a template with the typical settings for all of my accounts?

Programming “templates” can be created to speed up programming multiple Consoles. Common settings, such as the Central Station telephone number, communicator format, Console and communicator confi gurations which are shared by all of your accounts can be stored in an Account Profi le and used as a template. That template fi le can be used as a basis for creating each customer Account Profi le fi le. See “Using Profi le Copies” in the Help contents for more information on creating a template.

How do I add and remove the program’s password?

A password can be set to restrict the RA-2400 to authorized users only. To add a password, select “Change Password...” from the “Options” menu. Enter the password in the “New Password” fi eld. Verify it by entering the password again in “Re-type New Password” and click OK. To remove the password, enter your password in “Old Password”, don’t enter anything on the “New Password” and “Re-type New Password” fi elds and press OK.

Page 4 of the Linear Digital Video Recorder (DVS-2408) user manual — CD drive
Page 4 · click to enlarge
Page 4

1.2 SYSTEM REQUIREMENTS

Minimum System Requirements:

IBM compatible 486 personal computer with 8 Mb RAM

Windows 95/98/NT/ME/XP/2000 operating systems

VGA monitor

Name brand modem that is capable of 300 baud (BELL 103

compatible)

Hard disk drive with 10 Mb available space for the software

plus 18K available space for each Account Profi le fi le.

CD drive

Recommended System:

Pentium or better based personal computer with 16 Mb RAM

or more

Windows 95/98/NT/ME/XP/2000 operating systems

SVGA video card

Microsoft compatible mouse

Name brand modem that is capable of 300 baud (BELL 103

compatible)

Large hard disk drive (1000 Account Profi les use about 20

Mb)

CD drive

Compatible Systems Note:

The software described in this manual supports the programming of a variety of models of Linear’s Wireless Security Systems. References in these instructions are focused on the Model DVS-2400. The programming differences for the other models supported by this software are: DVS-1200: This model is identical to the DVS-2400 with the limitation of supporting only 12 sensors. Only the fi rst 12 sensors can be programmed in Sections 4.9, 4.13.1, and 4.13.2. DVS-2408/DUAL-824: This model programs the same as the DVS-2400 with the addition of supporting 8 hardwired loops. Hardwired loop programming is described in Section 4.9. PERS-2400: This model is not a Security System, but a Personal Emergency Reporting System. Refer to the RA-2400/PERS-2400 Programming Reference Guide P/N: 217163 for details on programming this model.

Page 5 of the Linear Digital Video Recorder (DVS-2408) user manual — IMPORTANT:
Page 5 · click to enlarge
Page 5

1.3 PROGRAMMING OUTLINE

Use the following programming outline to guide you through the steps required to set up the RA-2400 software and program a DVS-2400 Console. Many of the programming options available in the RA-2400 program can be left in their default settings, and do not need to be changed for most installations.

1. SETUP RA-2400 SOFTWARE

✦ Install the software on your computer (Section 1.4).

✦ Test your computer’s modem (Section 1.5).

✦ Start the RA-2400 program (Section 2.1).

✦ Set the Communications Setup options (Section 3).

2. CUSTOMIZE AN ACCOUNT PROFILE

✦ Open a new Account Profi le (Section 4.1).

✦ Enter customer information (Section 4.2).

✦ Set the Console’s access codes (Section 4.3).

✦ Set the Console’s arm/disarm options (Section 4.4).

✦ Set the Console’s exit/entry delays (Section 4.5).

✦ Set the Console’s alarm options (Section 4.6).

✦ Set the Console’s home-automation options (Section 4.7).

✦ Set the Console’s audio options (Section 4.8).

✦ Enable the Console’s communicator and choose a communicator

format (Section 4.10).

✦ Choose the communicator’s account number, telephone numbers,

and trouble report routing (Section 4.11).

✦ Set the communicator reporting options (Section 4.12).

✦ Set the communicator format reporting options (Section 4.13 or

4.14).

3. PROGRAM THE CONSOLE WITH THE ACCOUNT PROFILE

✦ Choose an Account Profi le (Section 5.2).

✦ Connect to the Console (Section 5.3).

✦ Send the data to the Console (Section 5.4).

✦ Receive the data from the Console (Section 5.5).

✦ Change the Console’s Mode (Section 5.6).

✦ Disconnect from the Console (Section 5.7).

IMPORTANT:

AFTER ANY PROGRAMMING CHANGES ARE MADE TO A CONSOLE, PERFORM THOROUGH TESTING TO VERIFY THAT THE CONSOLE OPERATES AS INTENDED.

Page 6 of the Linear Digital Video Recorder (DVS-2408) user manual — To Remove the Remote Access Program:
Page 6 · click to enlarge
Page 6

1.4 PROGRAM INSTALLATION

The RA-2400 Remote Access Program software is supplied on a CD- ROM. The installation program will create a directory on your hard disk drive. Be sure that you have at least 10 megabytes free on the hard disk for the program and any Account Profi le fi les that you create.

To Install the Remote Access Program:

✦ The fi rst step is to close all other running programs.

✦ Place the Remote Access CD into your computer CD drive.

✦ The installation process should start automatically. If the CD does

not auto run, use Windows Explorer to fi nd RASETUP.EXE on the CD. Double-click on RASETUP.EXE and the install program will start.

✦ Click the Next button to install the Remote Access software.

Follow the on-screen instructions as the setup program creates the directory and copies the program fi les onto your hard disk. A Remote Access icon will be created on your desktop screen.

✦ If you are performing a reinstallation, or an update, you will be

prompted to uninstall RA-2400 fi rst. After the uninstall is completed, browse to the appropriate drive letter for your CD drive and double- click on RASETUP.EXE. Then follow the on-screen steps to install the Remote Access software.

☞ NOTE: If Windows asks whether to replace existing .DLL fi les, fi rst answer NO. If RA-2400 fails to run, re-install RA-2400 and answer YES to replace existing .DLL fi les.

✦ Remove the CD and store it in a safe place.

To Remove the Remote Access Program:

✦ Press START, SETTINGS, CONTROL PANEL. Double-click on

ADD/REMOVE PROGRAMS.

✦ Select Linear RA-2400 and click ADD/REMOVE or CHANGE/

REMOVE button depending on your Windows Operating system.

Page 7 of the Linear Digital Video Recorder (DVS-2408) user manual — To Test the Modem:
Page 7 · click to enlarge
Page 7

1.5 TESTING THE MODEM

Linear Digital Video Recorder (DVS-2408) — 1.5 TESTING THE MODEM diagram (page 7)
Fig. 2

Before you run the Remote Access Program, be sure that the computer is running correctly and that the modem is installed and working properly.

To Test the Modem:

Windows Control Panel can be used to test the modem and determine what COM port it is connected to.

✦ Press START, SETTINGS, CONTROL PANEL. Double-click on

MODEMS.

✦ Verify that a modem is shown in the Modem Properties window.

✦ Click on the DIAGNOSTICS tab. The modem installed with the

COM port highlighted should be shown.

✦ Note the COM port information. It is used when setting COM port in

the Communications Setup window (see Section 3.1).

✦ Test the modem by pressing the MORE INFO... button. IF THE

MODEM IS CONNECTED AND WORKING PROPERLY, THE “MORE INFO” WINDOW WILL DISPLAY DETAILED MODEM INFORMATION. If the modem is not working properly, Windows will notify you.

Page 8 of the Linear Digital Video Recorder (DVS-2408) user manual — 2. OVERVIEW
Page 8 · click to enlarge
Page 8

2. OVERVIEW

2.1 STARTING THE PROGRAM 7

2.2 NEW WINDOW 7

2.3 MENU BAR 8

2.4 ACCOUNT PROFILE WINDOW OVERVIEW 10

☞ NOTE: Experienced computer or PC users should fi nd that entering data and navigating around the RA-2400 program dialog boxes is similar to most other Windows programs. New users, or users unfamiliar with running Windows applications, should refer to the Windows help fi le for details on using Windows.

Page 9 of the Linear Digital Video Recorder (DVS-2408) user manual — 2.2 NEW WINDOW
Page 9 · click to enlarge
Page 9

2.1 STARTING THE PROGRAM

Linear Digital Video Recorder (DVS-2408) — 2.1 STARTING THE PROGRAM diagram (page 9)
Fig. 3

To Run the Program:

✦ Press START, point to PROGRAMS, RA2400 and click on RA2400.

2.2 NEW WINDOW

Linear Digital Video Recorder (DVS-2408) — 2.2 NEW WINDOW diagram (page 9)
Fig. 4

To select an Account Profi le template for the type of unit being programmed.

✦ Select DVS-2400/2408 (with the correct Console fi rmware version

number).

✦ Press OK. The RA-2400 program window will appear with a starter template called DVS-2400/2408 Vx.x-1 showing in the workspace. This fi le can be stored later, under any name, using SAVE AS... in the FILE menu (see Section 2.3).

Page 10 of the Linear Digital Video Recorder (DVS-2408) user manual — EXIT
Page 10 · click to enlarge
Page 10

2.3 MENU BAR

Linear Digital Video Recorder (DVS-2408) — 2.3 MENU BAR diagram (page 10)
Fig. 5

To provide access to each of the programs sub-menus.

The sub-menus that can be accessed from this menu are:

File

NEW

To select an Account Profi le template for the type of unit being programmed.

OPEN

Loads a saved Account Profi le into the RA-2400 workspace. Mul- tiple Account Profi les can be open at the same time in the RA-2400 workspace. They can be arranged in the workspace using the Window menu on the menu bar, or by dragging them around manually.

CLOSE

Closes the active Account Profi le. If there were any changes to the fi le, Windows will ask if you want to save the changes.

SAVE

Saves the active Account Profi le to the hard drive, overwriting the existing fi le.

SAVE AS...

Saves the active Account Profi le while giving the option to change the name or location of the fi le.

PRINT...

Opens the PRINT window to allow printing of the active Account Profi le. Resulting printout is the entire content of the Account Profi le fi le in text format.

PRINT PREVIEW

Shows what will be printed on the screen with options to zoom in or print the document.

RECENT FILE LIST

Shows the last four fi le names (with paths) that were opened in RA-2400. Clicking on a fi le opens it.

EXIT

Closes the RA-2400 program. If any open Account Profi les have changed, Windows will ask if you want to save them.

Page 11 of the Linear Digital Video Recorder (DVS-2408) user manual — Table of Contents
Page 11 · Contents
Contents

Contents

RA-2400p.1REMOTE ACCESS SOFTWAREp.1FOR TECHNICAL ASSISTANCE CALL: Linear Technical Services: 1-800-421-1587p.11.1 SOFTWARE DESCRIPTIONp.31.2 SYSTEM REQUIREMENTSp.4Minimum System Requirements:p.4IBM compatible 486 personal computer with 8 Mb RAMp.4Windows 95/98/NT/ME/XP/2000 operating systemsp.4VGA monitorp.4Name brand modem that is capable of 300 baud (BELL 103p.4compatible)p.4Hard disk drive with 10 Mb available space for the softwarep.4CD drivep.4Recommended System:p.4Pentium or better based personal computer with 16 Mb RAMp.4or morep.4SVGA video cardp.4Microsoft compatible mousep.4Large hard disk drive (1000 Account Profi les use about 20p.4Mb)p.4Compatible Systems Note:p.41.3 PROGRAMMING OUTLINEp.51. SETUP RA-2400 SOFTWAREp.52. CUSTOMIZE AN ACCOUNT PROFILEp.53. PROGRAM THE CONSOLE WITH THE ACCOUNT PROFILEp.5IMPORTANT:p.51.4 PROGRAM INSTALLATIONp.6To Install the Remote Access Program:p.6To Remove the Remote Access Program:p.61.5 TESTING THE MODEMp.7To Test the Modem:p.72. OVERVIEWp.82.1 STARTING THE PROGRAMp.9To Run the Program:p.92.2 NEW WINDOWp.92.3 MENU BARp.10Filep.10NEWp.10OPENp.10CLOSEp.10SAVEp.10PRINT PREVIEWp.10RECENT FILE LISTp.10EXITp.102.3 MENU BAR (CONTINUED)p.11VIEWp.11TOOL BARp.11STATUS BARp.11COMMUNICATIONSp.11OPTIONSp.11CHANGE PASSWORDp.11WINDOWp.11CASCADEp.11TILEp.11HELPp.11CONTENTSp.11ABOUT RA-2400 REMOTE ACCESSp.112.4 ACCOUNT PROFILE WINDOW OVERVIEWp.12MENU TREE EDIT AREAp.123. COMMUNICATIONS SETUPp.133.1 COM PORTp.143.2 SPEAKERp.143.3 CONNECTION OPTIONSp.15CONSOLE LOCAL CABLE CONNECTIONp.15MODEMp.153.4 MODEM INITIALIZATION STRINGp.164. CREATING A CUSTOM ACCOUNT PROFILEp.174.1 NEW WINDOWp.184.2 CUSTOMER INFORMATIONp.19CUSTOMERp.194.3 CONSOLE ACCESS CODESp.20CODE DEFINITIONS:p.204.4 CONSOLE ARM/DISARMp.214.5 CONSOLE ENTRY/EXITp.224.6 CONSOLE ALARMSp.234.7 CONSOLE HOME-AUTOMATION OUTPUTp.244.8 CONSOLE AUDIOp.254.9 SENSORSp.264.9 SENSORS (CONTINUED)p.274.10 COMMUNICATOR MAINp.28
Page 12 of the Linear Digital Video Recorder (DVS-2408) user manual — MENU TREE EDIT AREA
Page 12 · click to enlarge
Page 12

2.4 ACCOUNT PROFILE WINDOW OVERVIEW

Linear Digital Video Recorder (DVS-2408) — 2.4 ACCOUNT PROFILE WINDOW OVERVIEW diagram (page 12)
Fig. 6

MENU TREE EDIT AREA

To enter data and make changes to an Account Profi le and customize it for a specifi c installation.

MENU TREE Used for selecting the various data entry fi elds in the Account Profi le. Clicking on the plus (+) symbols expands the branches of the menu tree. Clicking on the minus (-) symbols collapses the menu tree branch. Clicking on an item displays the data entry fi elds in the edit area or other information.

EDIT AREA Used for adding and changing the data in the Account Profi le. Click on the check boxes, buttons, and enter text and numbers in the data areas to modify the Account Profi le.

Page 13 of the Linear Digital Video Recorder (DVS-2408) user manual — 3. COMMUNICATIONS SETUP
Page 13 · click to enlarge
Page 13

3. COMMUNICATIONS SETUP

3.1 COM PORT 12

3.2 SPEAKER 12

3.3 CONNECTION OPTIONS 13

3.4 MODEM INITIALIZATION STRING 14

Linear Digital Video Recorder (DVS-2408) — 3. COMMUNICATIONS SETUP diagram (page 13)
Fig. 7

The communications setup window sets the COM port for the modem, the modem’s speaker characteristics, type of connection (local or remote), dialing method (tone or pulse), and modem initialization string.

✦ From the COMMUNICATIONS menu, select SETUP... to view the

Communications Setup window.

✦ See Sections 3.1 - 3.4 and make any changes as required.

✦ After making any changes to the Communication Setup window,

click OK to accept the changes and close the window.

Page 14 of the Linear Digital Video Recorder (DVS-2408) user manual — 3.2 SPEAKER
Page 14 · click to enlarge
Page 14

3.1 COM PORT

Linear Digital Video Recorder (DVS-2408) — 3.1 COM PORT diagram (page 14)
Fig. 8

To select which communications (COM) port the modem is connected to.

✦ Click on the COM port number (1, 2, 3, or 4) that the modem is

connected to.

☞ NOTE: See the TESTING THE MODEM Section (1.5) of this manual for determining the proper COM port number.

3.2 SPEAKER

Linear Digital Video Recorder (DVS-2408) — 3.2 SPEAKER diagram (page 14)
Fig. 9

To set how the modem’s speaker functions before and during communications.

✦ Select OFF to silence the modem’s speaker at all times.

✦ Select CARRIER to hear the modem connect and have the speaker

silenced when the RA-2400 is connected to the DVS-2400 Console.

✦ Select ON to hear the modem connect and hear the RA-2400

communicate with the DVS-2400 Console (for testing only).

Page 15 of the Linear Digital Video Recorder (DVS-2408) user manual — CONSOLE LOCAL CABLE CONNECTION
Page 15 · click to enlarge
Page 15

3.3 CONNECTION OPTIONS

Linear Digital Video Recorder (DVS-2408) — 3.3 CONNECTION OPTIONS diagram (page 15)
Fig. 10

To choose how the modem will connect to the DVS-2400 Console.

Remote Dialing dials a telephone number with the method chosen (tone or pulse) to connect with the Console over a standard telephone line.

Local Cable Connection does not dial a telephone number, but communicates with the Console wired directly to the modem.

✦ Select REMOTE DIALING if the Console is going to be accessed over

the telephone line.

✦ Select TONE or PULSE depending on the requirements for your

telephone system. NOTE: This only affects Remote Dialing.

✦ Select LOCAL CABLE CONNECTION if the Console’s T & R terminals

are connected directly to the modem’s LINE jack.

CONSOLE LOCAL CABLE CONNECTION

MODEM

MODEM'S LINE JACK TO CONSOLE'S T & R TERMINALS

Page 16 of the Linear Digital Video Recorder (DVS-2408) user manual — 3.4 MODEM INITIALIZATION STRING
Page 16 · click to enlarge
Page 16

3.4 MODEM INITIALIZATION STRING

Linear Digital Video Recorder (DVS-2408) — 3.4 MODEM INITIALIZATION STRING diagram (page 16)
Fig. 11

Used to choose whether the default or a custom initialization “string” is sent to confi gure the modem (a “string” is a series of characters that are commands for the modem). Modem’s use initialization strings to setup their speed, data type, and other options. The RA-2400 sends the initialization string to the modem before using the modem to connect to the DVS-2400.

☞ NOTE: There are hundreds of models of modems available, each with unique characteristics. Instead of using the default modem string, some modems may perform better with a custom initialization string.

✦ Leave USE DEFAULT INITIALIZATION STRING option selected unless

you are having trouble connecting with your modem.

✦ IF YOU ARE HAVING TROUBLE CONNECTING WITH YOUR

MODEM, and it tests OK with the Windows modem test diagnostics (see Section 1.5), try using a custom initialization string. Various model modems have different requirements for initialization strings. Refer to your modem’s manual for the required commands to place the modem in 300 BAUD BELL 103 confi guration. Two examples are “&F1&N1” and “N0S37=1”. If the initalization string is incorrect, the RA-2400 will display “ERROR WRITING INITIALIZATION STRING”.

☞ NOTE: When entering a custom initialization string, don’t enter the “AT” command. The RA-2400 program will do this automatically.

Page 17 of the Linear Digital Video Recorder (DVS-2408) user manual — 4. CREATING A CUSTOM ACCOUNT PROFILE
Page 17 · click to enlarge
Page 17

4. CREATING A CUSTOM ACCOUNT PROFILE

4.1 NEW WINDOW 16

4.2 CUSTOMER INFORMATION 17

4.3 CONSOLE ACCESS CODES 18

4.4 CONSOLE ARM/DISARM 19

4.5 CONSOLE ENTRY/EXIT 20

4.6 CONSOLE ALARMS 21

4.7 CONSOLE HOME-AUTOMATION OUTPUT 22

4.8 CONSOLE AUDIO 23

4.9 SENSORS 24

4.10 COMMUNICATOR MAIN 26

4.11 COMMUNICATOR ROUTING AND NUMBERS 27

4.12 COMMUNICATOR ENABLED REPORTS 28

4.13 COMMUNICATOR 4 BY 2 FORMAT 29

4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES 30

4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES 31

4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES 32

4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES 33

4.13.5 CONSOLE ALARM CODES 34

4.13.6 4 BY 2 GENERAL ALARM CODES 35

4.14 ADEMCO CONTACT-ID REPORT CODES 36

Each installation requires an Account Profi le. While many items are the same in different Consoles reporting to the same Central Station, some items (account number, customer information, & sensor information) are unique for each installation.

A custom Account Profi le is created by editing the DVS-2400 Account Profi le template included with the RA-2400 software. The customized profi le should then be saved with a unique name for the account and then sent to the DVS-2400 Console.

To provide a clean start. Close any open Account Profi les on the workspace.

Page 18 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.1 NEW WINDOW
Page 18 · click to enlarge
Page 18

4.1 NEW WINDOW

To select an Account Profi le template for the type of unit being programmed.

NEW ✦ Click on NEW icon on tool bar or select NEW from the FILE menu.

✦ Select DVS-2400/2408 (with the correct Console fi rmware version

number).

✦ Click OK. The new Account Profi le will appear as a starter template called DVS-2400/2408 Vx.x-1 (or -2, -3, etc.) in the workspace.

Page 19 of the Linear Digital Video Recorder (DVS-2408) user manual — CUSTOMER
Page 19 · click to enlarge
Page 19

4.2 CUSTOMER INFORMATION

Linear Digital Video Recorder (DVS-2408) — 4.2 CUSTOMER INFORMATION diagram (page 19)
Fig. 12

For entering customer information specifi c to the installation for the Account Profi le.

CUSTOMER

☞ NOTE: All fi elds are optional and do not have to be fi lled in. This information is not sent to the Console.

✦ Enter a CUSTOMER ID for the installation.

✦ Enter the customers name in the NAME fi eld.

✦ Enter the customers address in ADDRESS fi elds 1, 2, & 3.

✦ Enter the customers telephone number(s) in PHONE fi elds 1 & 2.

✦ Enter the number of the telephone line that the Console is

connected to in the CONSOLE PHONE fi eld. This fi eld will show as the telephone number for the account in the Send/Receive window.

☞ NOTE: DO NOT enter any dashes or spaces into the telephone number fi elds. Enter numbers only.

✦ Enter any special information about the customer in the NOTES fi eld.

Page 20 of the Linear Digital Video Recorder (DVS-2408) user manual — CODE DEFINITIONS:
Page 20 · click to enlarge
Page 20

4.3 CONSOLE ACCESS CODES

Linear Digital Video Recorder (DVS-2408) — 4.3 CONSOLE ACCESS CODES diagram (page 20)
Fig. 13

To install a Master Access Code and up to 5 Restricted Access Codes, a Duress Code, and a Page Alert Code.

CODE DEFINITIONS:

MASTER ACCESS CODE ✦ Allows arming and disarming the Console. Allows access to all programming

options.

RESTRICTED ACCESS CODE ✦ Allows arming and disarming the Console. Allows entering and editing

Restricted Access Codes.

DURESS ACCESS CODE ✦ Allows all options of a Restricted Access Code and causes the Console to

report the duress code to the Central Station if programmed to report.

PAGE ALERT CODE ✦ Allows all options of a Restricted Access Code and causes the Console

to dial the supervisory number (see Section 4.11, Communicator Routing and Numbers).

ACCESS CODES ✦ MASTERWhen power is fi rst applied to the Console the Master Access Code

is “1234”. Enter any combination of 1 to 5 digits (3 to 5 digits recommended) for the Master Access Code.

✦ RESTRICTEDEnter any combination of 1 to 5 digits (3 to 5 digits

recommended) for Restricted Access Codes 1-5.

✦ DURESSEnter any combination of 1 to 5 digits (3 to 5 digits recommended)

for the Duress Code. The Duress Code should be 2 or more digits different than any other user code to help minimize accidental activation.

✦ PAGE ALERTEnter any combination of 1 to 5 digits (3 to 5 digits

recommended) for the Page Alert Code.

Page 21 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.4 CONSOLE ARM/DISARM
Page 21 · click to enlarge
Page 21

4.4 CONSOLE ARM/DISARM

Linear Digital Video Recorder (DVS-2408) — 4.4 CONSOLE ARM/DISARM diagram (page 21)
Fig. 14

To select which modes any remote arm/disarm transmitters will switch to. Also for selection of fi ve arm/disarm options.

ARM/DISARM ✦ TOGGLE-ARM TOSelect either HOME or AWAY to choose the mode that any

remote arm/disarm transmitters will arm the Console to.

✦ TOGGLE-DISARM TOSelect either OFF or CHIME to choose the mode that

any remote arm/disarm transmitters will disarm the Console to.

✦ CHIRP ON REMOTE ARM/DISARMWhen arming with the portable remote

control, if this box is checked the Console will “chirp” once when armed, twice when disarmed, and three times when arming with sensors bypassed. Un-check this box to silence the “chirps”.

✦ AUTO-BYPASSIf this box is unchecked, the user must manually bypass

any open sensors when the system is armed. If arming is attempted with open sensors, the Console will sound fi ve two-tone beeps and will not arm. Arming to the same mode again within fi ve seconds will bypass any open sensors and arm the Console. Check this box and the Console will automatically bypass any open sensors when the system is armed.

✦ BYPASS-RESTORALBypassed sensors are ignored by the Console and

cannot cause an alarm. If this box is checked, the Console will automatically restore (remove the bypass from) any bypassed sensor when the sensor closes. After it’s restored, the sensor is ready to cause an alarm the next time it is opened. Un-check this box to not automatically restore sensors that close.

✦ ALLOW QUICK-ARMIf this box is checked, it allows the Console to be armed

by holding down a mode key for two seconds. Un-check this box and an access code must be entered before pressing the mode buttons.

✦ HOME AUTOMATION OUTPUT ACTIVE WHILE ARMED: If this box is checked,

the Console’s Automation Output will activate when the system is armed. Un-check this box to disable this feature.

Page 22 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.5 CONSOLE ENTRY/EXIT
Page 22 · click to enlarge
Page 22

4.5 CONSOLE ENTRY/EXIT

Linear Digital Video Recorder (DVS-2408) — 4.5 CONSOLE ENTRY/EXIT diagram (page 22)
Fig. 15

To select delay times and other options for the Console’s exit and entry delays.

ENTRY/EXIT ✦ ENTRY DELAYTo change the entry delay, enter a delay time from

20 to 255 seconds.

✦ EXIT DELAYTo change the exit delay, enter a delay time from 20

to 255 seconds.

✦ BEEP DURING ENTRY DELAYWith this box checked, beeps will sound

during the entry delay. Un-check this box to silence the beeps during the entry delay.

✦ BEEP DURING EXIT DELAYWith this box checked, beeps will sound

during the exit delay. Un-check this box to silence the beeps during the exit delay.

✦ HOME-AUTOMATION OUTPUT ACTIVE DURING ENTRY/EXIT: With this box

checked, the home-automation output will be active during the entry/exit delay. Un-check this box to disable this feature.

Page 23 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.6 CONSOLE ALARMS
Page 23 · click to enlarge
Page 23

4.6 CONSOLE ALARMS

Linear Digital Video Recorder (DVS-2408) — 4.6 CONSOLE ALARMS diagram (page 23)
Fig. 16

For setting the way the burglary, emergency and fi re sirens work. Also sets the options for the home-automation output during and after alarms.

ALARMS ✦ BURGLARY ALARMSelect SILENT to disable the burglary siren or

select SIREN FOR SET TIME for a timed siren after activation. With timed siren selected, enter the length of time (from 1 to 30 minutes) for the burglary siren to run.

✦ EMERGENCY ALARMSelect SILENT to disable the emergency siren

or select SIREN FOR SET TIME for a timed siren after activation. With timed siren selected, enter the length of time (from 1 to 30 minutes) for the emergency siren to run.

✦ FIRE ALARMEnter the length of time (from 1 to 30 minutes) for the

fi re siren to run in the FIRE ALARM SIREN TIME area.

✦ HOME-AUTOMATION OUTPUT DURING SIREN TIME: Select NONE, FLASH,

or ACTIVE from the drop-down menu to choose the way the home-automation output functions while the siren is running.

✦ HOME-AUTOMATION OUTPUT FLASHES DURING/AFTER ALARM: With this

box checked, the home-automation output will fl ash during and after an alarm until the Console is disarmed.

☞ NOTE: The home-automation output will activate steady if the above option is set to ACTIVE.

Page 24 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.7 CONSOLE HOME-AUTOMATION OUTPUT
Page 24 · click to enlarge
Page 24

4.7 CONSOLE HOME-AUTOMATION OUTPUT

Linear Digital Video Recorder (DVS-2408) — 4.7 CONSOLE HOME-AUTOMATION OUTPUT diagram (page 24)
Fig. 17

For setting the way the home-automation output functions.

HOME AUTOMATION-OUTPUT ✦ WHEN TRIGGEREDSelect TOGGLES to cause the home-automation

output to switch between on & off with each activation. Select ACTIVE FOR SET DURATION for a timed home-automation output and enter the length of time 1-2500 (in seconds) for the output to activate.

✦ WHEN ACTIVESelect OPEN to have the home-automation minus

terminal fl oat when the output is active. Select SHORTED TO COMMON to have the home-automation minus terminal switch to common ground when the output is active.

✦ AUDIBLE BELL WHEN TRIGGEREDWith this box checked, the Console

will sound a “bing” when the home-automation output is activated. Un-check this box to have the home-automation output activate silently.

Page 25 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.8 CONSOLE AUDIO
Page 25 · click to enlarge
Page 25

4.8 CONSOLE AUDIO

Linear Digital Video Recorder (DVS-2408) — 4.8 CONSOLE AUDIO diagram (page 25)
Fig. 18

To select how the Voice Board operates. NOTE: The Model VB-2 (for 2-way audio) or VB-3 Voice Board must be installed to use these options. Selects the audio mode for monitoring with the Console’s microphone and communicating through the Console’s speaker to the subscriber. Controls the human voice prompts from the Voice Board.

With 2-way Audio enabled, after the Central Station operator acknowledges the communicators report, the Console will stop its siren and switch to the selected audio mode for 90 seconds.

AUDIO ✦ Click the arrow to show a list of settings for Two-way Audio and

select the desired mode. NONE: Audio Board will not report as an audio account to the Central Station. No audio monitoring will occur. LISTEN-ONLY: The operator will be able to hear sound from the Console but will not be able to talk through the Console’s speaker. Pressing “9” on a telephone connected to the line disconnects the call (press any key but “9” to extend the time 90 seconds). TWO-WAY MANUAL: The operator will be able to hear sound from the Console and will be able to talk through the Console’s speaker. The operator can switch from listen to talk by pressing “1”, or switch from talk to listen by pressing “3” on a telephone connected to the line. Pressing “9” disconnects the call (press any key but “9” to extend the time 90 seconds). TWO-WAY DUPLEX: The operator will be able to hear sound from the Console and will be able to talk through the Console’s speaker. The audio board will listen until the operator speaks, then the voice activation will switch the voice board to talk as long as the operator speaks. The operator can still switch from listen to talk manually by pressing “1”, or switch from talk to listen by pressing “3” on a telephone connected to the line (with increased volume). Pressing “8” returns to two-way duplex. Pressing “9” disconnects the call. Press any key but “9” to extend the time 90 seconds.

✦ Check the VOICE PROMPTS ENABLED box to have the Console

announce system events with a digitally synthesized human voice.

Page 26 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.9 SENSORS
Page 26 · click to enlarge
Page 26

4.9 SENSORS

Linear Digital Video Recorder (DVS-2408) — 4.9 SENSORS diagram (page 26)
Fig. 19

To display and edit sensors installed in the Console’s memory. Up to 24 sensors may be installed, each with its own type, restore and supervision options. The status of the sensor selected is also displayed.

☞ NOTE: To display and edit sensors installed in the Console, the sensor data must fi rst be received from the Console (see Section 5.5).

SENSOR TYPE ✦ Click on the sensor in the menu tree to view it.

✦ View or edit the SENSOR TYPE. The sensor type options are:

NOT INSTALLED: No sensor has been stored in this sensor location. Also can be used to remove a sensor from the Console’s memory. Sensors cannot be added with this menu. HOME AUTOMATION: Sensor will trigger the Console’s home-automation output. EMERGENCY: Sensor will trigger the emergency siren and report the emergency code to the Central Station. POLICE: Sensor will trigger the silent panic alarm and report the police code to the Central Station. FIRE: Sensor will trigger the fi re siren and report the fi re code to the Central Station.

Page 27 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.9 SENSORS (CONTINUED)
Page 27 · click to enlarge
Page 27

4.9 SENSORS (CONTINUED)

PERIMETER: Sensor will instantly trigger the burglary siren and report the burglary code to the Central Station in Home or Away Mode. Sensor will sound chime in Chime Mode. ENTRY/EXIT: Sensor uses the exit/entry delay and can trigger the burglary siren and report the burglary code to the Central Station in Home or Away mode. Sensor will sound chime in Chime Mode. INTERIOR: Sensor is only active in the Away Mode. It will instantly trigger the burglary siren and report the burglary code to the Central Station if triggered before an entry/exit sensor. Causes a delayed alarm if activated during the entry delay. CHIME: Sensor will sound chime in all modes. ARM/DISARM + HOME AUTO: The left button on a 2-button sensor will arm/disarm the Console. The right button on a 2-button sensor activates the home-automation output. Pressing both buttons triggers the emergency siren. ARM & DISARM: The left button on a 2-button sensor will arm the Console. The right button on a 2-button sensor will disarm the Console. Pressing both buttons triggers the emergency siren. ENVIRONMENTAL: Sensor is always armed in all modes. Causes a local annunciation when triggered. KEYPAD: Reserved for wireless keypads used with the Console. INTERIOR HOME: Sensor allows interior zones to trigger an alarm. This will generally be used with PIRs that are not in normal nighttime mode.

SENSOR OPTIONS ✦ View or edit the SENSOR OPTIONS. These options are automatically set when

the sensor is programmed into the Console. The sensor options are: AUTO RESTORE: This box should be checked for auto restoring sensors that only send alarm transmissions. The Console will automatically restore the “open” sensor. SUPERVISED: This box should be checked for all sensors that send periodic status reports. DXT sensors do not send periodic status reports. REMOVE THE CHECK FROM THIS BOX IF A MODEL DXT SENSOR HAS BEEN PROGRAMMED INTO THIS SENSOR LOCATION or if you don’t want supervision for that sensor. This will keep the Console TROUBLE indicator from lighting due to missing status reports from that sensor.

☞ NOTE: The sensor can still report a low battery condition this will cause the Console’s BATTERIES indicator to fl ash. HARDWIRED OPTIONS: For Model DVS-2408 only. Selects which hardwired loop (1-8) is assigned to the sensor number selected. For non-hardwired sensors, this selection should be set to WIRELESS.

SENSOR STATUS ✦ View the SENSOR STATUS to see the condition of the sensor selected.

The sensor status conditions are: BYPASSED: The Console was armed with this sensor open. It is currently bypassed and cannot cause an alarm. LOW BATTERY: The sensor has sent a low battery signal to the Console. Replace the sensor’s battery. TROUBLE: The Console has not received a status report from this sensor in 8 hours. Sensor may have been out of range of the Console’s receiver, or the sensor may be non-functional.

☞ NOTE: After any changes are made to the sensor type or sensor options, test the sensor to verify proper operation. Testing the “repaired” transmitter will reset the TROUBLE indicator.

Page 28 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.10 COMMUNICATOR MAIN
Page 28 · click to enlarge
Page 28

4.10 COMMUNICATOR MAIN

Linear Digital Video Recorder (DVS-2408) — 4.10 COMMUNICATOR MAIN diagram (page 28)
Fig. 20

For confi guring the Console’s communicator format, dialing method, remote access password, dialing delay, and auto answer options.

COMMUNICATOR MAIN ✦ Check the ON box to enable the communicator in the Console.

☞ NOTE: You may want to turn the communicator off while testing the system to prevent the Console from trying to dial out when it is not connected to a telephone line.

✦ FORMATSelect either 4 BY 2 or ADEMCO CONTACT ID for the communicator

format depending on the Central Station’s requirements.

✦ DIAL METHOD: Select either TONE or PULSE dialing for the Console.

✦ REMOTE ACCESS PASSWORDEnter a six-digit password. This is the password

required to connect to the Console with the RA-2400 program. The default password is “987654”. DO NOT FORGET THIS PASSWORD, LOCAL OR REMOTE PROGRAMMING ACCESS TO THE DVS-2400 IS IMPOSSIBLE WITHOUT IT.

✦ 30 SECOND DIALING DELAYCheck this box to cause a 30 second delay before

the communicator starts to dial after an alarm. This gives the subscriber time to cancel a Central Station report before the unit dials out.

✦ SWINGER ELIMINATORCheck this box to limit the maximum number of Central

Station burglary reports to fi ve per arming period. This will not effect the 24-hour zones (fi re, panic, and emergency).

✦ REMOTE LOCKOUTCheck this box to disable the Console’s telephone ring

detection feature. This keeps the Console from automatically answering the phone. Even if this box is checked, the Console can still be programmed by placing the Console into Test Mode and forcing the Console to answer by pressing the EMERGENCY button while the phone is ringing.

Page 29 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.11 COMMUNICATOR ROUTING AND NUMBERS
Page 29 · click to enlarge
Page 29

4.11 COMMUNICATOR ROUTING AND NUMBERS

Linear Digital Video Recorder (DVS-2408) — 4.11 COMMUNICATOR ROUTING AND NUMBERS diagram (page 29)
Fig. 21

For confi guring the Console’s communicator account number, trouble report routing, and telephone numbers.

ACCOUNT NUMBERS ✦ Enter a four digit account number for the communicator format used.

TROUBLE REPORT ROUTING ✦ Select TROUBLE REPORTS TO PRIMARY AND SECONDARY to have trouble

reports routed to the primary number for fi ve attempts, then to the secondary number for fi ve attempts before re-trying. Select TROUBLE REPORTS ONLY TO SUPERVISORY to have trouble reports routed to the supervisory number only (don’t select this option if the page alert feature is being used).

☞ NOTE: This does not effect emergency reports which are always routed to the primary or secondary telephone numbers.

PHONE NUMBERS Telephone numbers can be up to 20 digits long. DO NOT enter any dashes or spaces into the telephone number fi elds. The “#” symbol inserts a 1-second delay, the “~” symbol inserts a 5-second delay.

☞ NOTE: If no telephone numbers are entered, the Console will not report.

✦ PRIMARYEnter the correct telephone number to connect the Central Station

receiver.

✦ SECONDARYEnter the correct backup telephone number to connect the

Central Station receiver.

✦ SUPERVISORYFor trouble reports: Enter the correct telephone number

to connect the Central Station receiver for supervisory reports. For Page Alert: Enter the pager telephone number and the numerical message (up to 20 digits total) into the SUPERVISORY area. TIP: Call the pager number and measure the time between placing the call and the prompt to key-in the pager message. Use this time measurement to choose the special characters (# or ~) to insert a delay between the pager telephone number and pager message. NOTE: Many pager companies require a pound sign (#) to end the message (a pound sign at the end of the page alert message is treated as the # key, not is a delay) Example with a 7-second delay and pound sign end: 5551234~##07734#

Page 30 of the Linear Digital Video Recorder (DVS-2408) user manual — 4 BY 2 OPENING & CLOSING REPORT CODES
Page 30 · click to enlarge
Page 30

4.12 COMMUNICATOR ENABLED REPORTS

Linear Digital Video Recorder (DVS-2408) — 4.12 COMMUNICATOR ENABLED REPORTS diagram (page 30)
Fig. 22

For confi guring the Console condition reporting options.

ENABLED REPORTS ✦ FORCE-ARMCheck this box to cause the communicator to report

arming of the Console to Away Mode with an open and bypassed sensor.

✦ CONSOLE TROUBLECheck this box to report low Console backup

battery and Console backup battery restoral (charged after being low) conditions.

✦ OPEN/CLOSESelect an option for the Console’s open (disarming)

and close (arming) reporting:

DISABLED: Select this option for no open/close reports.

ENABLED: Select this option for open/close reports when the system is armed or disarmed by any user’s access code.

MASTER ONLY: Select this option for open/close reports only when the system is armed or disarmed using the master access code.

4 BY 2 OPENING & CLOSING REPORT CODES

ACCESS CODE 4 BY 2 CLOSING (ARMING) CODE

4 BY 2 OPENING (DISARMING) CODE

MASTER ACCESS CODE 74 82 RESTRICTED ACCESS CODE #1 75 83 RESTRICTED ACCESS CODE #2 76 84 RESTRICTED ACCESS CODE #3 77 85 RESTRICTED ACCESS CODE #4 78 86 RESTRICTED ACCESS CODE #5 79 87 REMOTE/HARDWIRE ARM & QUICK ARM 81 89

Page 31 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13 COMMUNICATOR 4 BY 2 FORMAT
Page 31 · click to enlarge
Page 31

4.13 COMMUNICATOR 4 BY 2 FORMAT

Linear Digital Video Recorder (DVS-2408) — 4.13 COMMUNICATOR 4 BY 2 FORMAT diagram (page 31)
Fig. 23

☞ NOTE: Section 4.13 pertains to the 4 by 2 communicator format only.

For confi guring how the 4 by 2 format will report to the Central Station. General reporting or Point-to-Point reporting methods are available for the 4 by 2 format.

GENERAL REPORTING: General reporting can send fi ve report codes for sensors: FIRE, EMERGENCY, POLICE, BURGLARY and TROUBLE. General reporting does not indicate which sensor caused the report.

POINT-TO-POINT REPORTING: Point-to-Point reporting sends each sensor/ zone number with a unique ALARM code and TROUBLE code.

☞ NOTE: With either reporting method, the Console alarm codes are the same (see Section 4.13.5).

4 BY 2 FORMAT ✦ Select POINT-TO-POINT to have the Console’s communicator send

4 by 2 Point-to-Point report codes. Select GENERAL to have the Console’s communicator send only the fi ve 4 by 2 General report codes.

Page 32 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES
Page 32 · click to enlarge
Page 32

4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES diagram (page 32)
Fig. 24

To view and edit the 24 sensor/zone alarm report codes.

☞ NOTE: 4 by 2 Point-to-Point Reporting must be selected (see Section 4.13) for these codes to report.

ZONE CODES ✦ Enter a new two-digit alarm code for any sensor/zone that needs

to be changed.

☞ NOTE: Entering a “0” for an alarm code will prevent that zone from reporting.

Page 33 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES
Page 33 · click to enlarge
Page 33

4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES diagram (page 33)
Fig. 25

To view and edit the 24 sensor/zone trouble report codes.

☞ NOTE: 4 by 2 Point-to-Point Reporting must be selected (see Section 4.13) for these codes to report.

ZONE CODES ✦ Enter a new two-digit trouble code for any sensor/zone that needs

to be changed.

☞ NOTE: Entering a “0” for a trouble code will prevent that zone from reporting.

Page 34 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES
Page 34 · click to enlarge
Page 34

4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES diagram (page 34)
Fig. 26

To view and edit the force arming report code. This report is sent when force arm is enabled (Section 4.12) and the system is armed with any open sensors that have been bypassed.

☞ NOTE: With either reporting method, the force arming code is the same.

ACCESS CODES (CLOSE) ✦ FORCE-ARMEnter a new two-digit force arming code if it needs to

be changed.

☞ NOTE: Entering a “0” for a force arming code will prevent it from reporting.

Page 35 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES
Page 35 · click to enlarge
Page 35

4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES diagram (page 35)
Fig. 27

To view and edit the duress report code. This report is sent when the system is armed or disarmed using the duress access code.

☞ NOTE: With either reporting method, the duress code is the same.

ACCESS CODES (OPEN) ✦ DURESSEnter a new two-digit duress code if it needs to be

changed.

☞ NOTE: Entering a “0” for a duress code will prevent it from reporting.

Page 36 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.5 4 BY 2 CONSOLE ALARM CODES
Page 36 · click to enlarge
Page 36

4.13.5 4 BY 2 CONSOLE ALARM CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.5 4 BY 2 CONSOLE ALARM CODES diagram (page 36)
Fig. 28

To view and edit the fi ve Console report codes. These codes are sent for Console events such as the Console emergency button, fi re button, Console low battery and battery restore. The cancel report occurs when the Console is disarmed during an alarm.

☞ NOTE: These report codes are sent for both 4 by 2 General and 4 by 2 Point-to-Point Reporting.

CONSOLE ALARM CODES ✦ Enter a new two-digit report code for any Console event that needs

to be changed.

☞ NOTE: Entering a “0” for a report code will prevent that event from reporting.

Page 37 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.13.6 4 BY 2 GENERAL ALARM CODES
Page 37 · click to enlarge
Page 37

4.13.6 4 BY 2 GENERAL ALARM CODES

Linear Digital Video Recorder (DVS-2408) — 4.13.6 4 BY 2 GENERAL ALARM CODES diagram (page 37)
Fig. 29

To view and edit the four general alarm codes and the general trouble code.

☞ NOTE: 4 by 2 General Reporting must be selected (see Section 4.13) for these codes to report.

4 BY 2 GENERAL ALARM CODES ✦ Enter a new one or two-digit report code for any general alarm code

that needs to be changed.

☞ NOTE: Entering a “0” for an alarm code will prevent that event from reporting.

Page 38 of the Linear Digital Video Recorder (DVS-2408) user manual — 4.14 ADEMCO CONTACT-ID REPORT CODES
Page 38 · click to enlarge
Page 38

4.14 ADEMCO CONTACT-ID REPORT CODES

The Ademco Contact-ID reporting codes are pre-defi ned and cannot be changed. These reporting codes are provided as reference. The Ademco Contact-ID extended report codes indicate the sensor number that triggered the event. Console events report with a “000” extended code.

☞ NOTE: Ademco Contact-ID Reporting must be selected for these codes to report (see Section 4.10).

S E D O C T R O P E R D I-T C A T N O C O C M E D A S E D O C T R O P E R D I-T C A T N O C O C M E D A S E D O C T R O P E R D I-T C A T N O C O C M E D A S E D O C T R O P E R D I-T C A T N O C O C M E D A S E D O C T R O P E R D I-T C A T N O C O C M E D A

T N E V E T N E V E T N E V E T N E V E T N E V E E D O C M R A L A E D O C M R A L A E D O C M R A L A E D O C M R A L A E D O C M R A L A E D O C D E D N E T X E E D O C D E D N E T X E E D O C D E D N E T X E E D O C D E D N E T X E E D O C D E D N E T X E

Y C N E G R E M E R O S N E S 0 2 1 E x x 0 C

Y C N E G R E M E E L O S N O C 0 2 1 E 6 2 0 C

E R IF R O S N E S 1 1 1 E x x 0 C

E R IF E L O S N O C 0 1 1 E 5 2 0 C

M R A L A Y R A L G R U B 0 3 1 E x x 0 C

C I N A P T N E LIS 2 2 1 E x x 0 C

M R A E C R O F 4 7 5 E 0 0 0 C

S S E R U D 1 2 1 E 0 0 0 C

L E C N A C 6 0 4 E 0 0 0 C

Y R E T T A B W O L R O S N E S 4 8 3 E x x 0 C

E L B U O R T S U T A T S R O S N E S 1 8 3 E x x 0 C

Y R E T T A B W O L E L O S N O C 2 0 3 E 0 0 0 C

E R O T S E R Y R E T T A B E L O S N O C 2 0 3 R 0 0 0 C

O I D U A Y A W -2 6 0 6 E 0 0 0 C

T R O P E R D E D N E T X E N I R E B M U N R O S N E S = x x

S E D O C T R O P E R G N I S O L C & G N I N E P O D I-T C A T N O C O C M E D A S E D O C T R O P E R G N I S O L C & G N I N E P O D I-T C A T N O C O C M E D A S E D O C T R O P E R G N I S O L C & G N I N E P O D I-T C A T N O C O C M E D A S E D O C T R O P E R G N I S O L C & G N I N E P O D I-T C A T N O C O C M E D A S E D O C T R O P E R G N I S O L C & G N I N E P O D I-T C A T N O C O C M E D A

E D O C S S E C C A E D O C S S E C C A E D O C S S E C C A E D O C S S E C C A E D O C S S E C C A G N I S O L C O C M E D A G N I S O L C O C M E D A G N I S O L C O C M E D A G N I S O L C O C M E D A G N I S O L C O C M E D A

G N I N E P O O C M E D A G N I N E P O O C M E D A G N I N E P O O C M E D A G N I N E P O O C M E D A G N I N E P O O C M E D A

E D O C ) G N I M R A ( E D O C ) G N I M R A ( E D O C ) G N I M R A ( E D O C ) G N I M R A ( E D O C ) G N I M R A (

E D O C ) G N I M R A S I D ( E D O C ) G N I M R A S I D ( E D O C ) G N I M R A S I D ( E D O C ) G N I M R A S I D ( E D O C ) G N I M R A S I D (

E D O C S S E C C A R E T S A M 0 0 0 C 1 0 4 R 0 0 0 C 1 0 4 E

1 # E D O C S S E C C A D E T C I R T S E R 1 0 0 C 1 0 4 R 1 0 0 C 1 0 4 E

2 # E D O C S S E C C A D E T C I R T S E R 2 0 0 C 1 0 4 R 2 0 0 C 1 0 4 E

3 # E D O C S S E C C A D E T C I R T S E R 3 0 0 C 1 0 4 R 3 0 0 C 1 0 4 E

4 # E D O C S S E C C A D E T C I R T S E R 4 0 0 C 1 0 4 R 4 0 0 C 1 0 4 E

5 # E D O C S S E C C A D E T C I R T S E R 5 0 0 C 1 0 4 R 5 0 0 C 1 0 4 E

M R A K C I U Q & M R A E R I W D R A H /E T O M E R 7 0 0 C 7 0 4 R

M R A SI D E R I W D R A H /E T O M E R 7 0 0 C 7 0 4 E

Page 39 of the Linear Digital Video Recorder (DVS-2408) user manual — 5. SENDING AND RECEIVING CONSOLE DATA
Page 39 · click to enlarge
Page 39

5. SENDING AND RECEIVING CONSOLE DATA

5.1 ACCESSING THE SEND/RECEIVE WINDOW 38

5.2 CHOOSING AN ACCOUNT PROFILE 39

5.3 CONNECTING TO A CONSOLE 40

5.4 SENDING DATA 42

5.5 RECEIVING DATA 43

5.6 CHANGING THE CONSOLE’S MODE 44

5.7 DISCONNECTING FROM THE CONSOLE 45

5.8 CLOSING RA-2400 46 Sending and receiving the Account Profi le data to the DVS-2400 Console is the main purpose of the RA-2400 program. The Account Profi les that you create exist only on your disk drive until they are copied to a Console. The Send/Receive window controls all external communications for the RA-2400 software. It is used to select which Account Profi le gets sent to, or received from, a Console in the fi eld (accessed through remote dialing) or connected directly to the modem (accessed through a local cable connection). See Section 3.3 for connection details.

Page 40 of the Linear Digital Video Recorder (DVS-2408) user manual — OPEN A SAVED OR NEW ACCOUNT PROFILE
Page 40 · click to enlarge
Page 40

5.1 ACCESSING THE SEND/RECEIVE WINDOW

Linear Digital Video Recorder (DVS-2408) — 5.1 ACCESSING THE SEND/RECEIVE WINDOW diagram (page 40)
Fig. 30

OPEN A SAVED OR NEW ACCOUNT PROFILE

CLICK THE SEND/RECEIVE BUTTON

For entering data required to connect to a DVS-2400 Console and to control the connection. Monitors the status of the communication between the RA-2400 and the DVS-2400.

✦ An Account Profi le fi le must be open before the Send/Receive

window can be accessed. Use the OPEN... or NEW command in the FILE menu or on the tool bar to load an Account Profi le into the workspace.

✦ From the COMMUNICATIONS menu, choose SEND/RECEIVE..., or click

on the SEND/RECEIVE button on the tool bar.

Page 41 of the Linear Digital Video Recorder (DVS-2408) user manual — CHOOSE ACCOUNT PROFILE
Page 41 · click to enlarge
Page 41

5.2 CHOOSING AN ACCOUNT PROFILE

Linear Digital Video Recorder (DVS-2408) — 5.2 CHOOSING AN ACCOUNT PROFILE diagram (page 41)
Fig. 31

CHOOSE ACCOUNT PROFILE

For selecting which Account Profi le open in the workspace will be used when connecting to a Console. The Account Profi le selected automatically fi lls in the Console’s Phone Number and Password Fields using information already entered in the profi le (see Section 2.4).

CHOOSE AN ACCOUNT ✦ Click on the desired Account Profi le in the Choose an Account box

for the Console that is going to be programmed. The installation telephone number and Console password should appear in the boxes.

Page 42 of the Linear Digital Video Recorder (DVS-2408) user manual — 5.3 CONNECTING TO A CONSOLE
Page 42 · click to enlarge
Page 42

5.3 CONNECTING TO A CONSOLE

Linear Digital Video Recorder (DVS-2408) — 5.3 CONNECTING TO A CONSOLE diagram (page 42)
Fig. 32

Causes the RA-2400 to connect to the DVS-2400 Console. The RA-2400 will try to connect to the Console either locally or remotely, depending on the Communications Setup (see Section 3.3).

☞ NOTE: The Communications Setup can be reviewed by pressing the COMM SETUP... button in the Send/Receive window.

☞ NOTE: Before connecting to a Console, it is recommended that all of the sensors used in the system be entered into the Console’s memory. This will prevent having to connect to the Console again after programming if modifi cation of the sensor options is required.

BEFORE CONNECTING ✦ Be sure the computer’s modem is powered on, connected, and

tested as described in Section 1.5 of this manual.

✦ Check that the Console is powered on.

✦ Be sure that the Account Profi le you want to associate with the

particular Console is selected in the Choose an Account box.

Page 43 of the Linear Digital Video Recorder (DVS-2408) user manual — 5.3 CONNECTING TO A CONSOLE (CONTINUED)
Page 43 · click to enlarge
Page 43

5.3 CONNECTING TO A CONSOLE (CONTINUED)

CONNECTING LOCALLY ✦ Verify that the modem’s LINE jack is connected to the Console’s

T&R Terminals with a cable.

✦ Verify that the Console is in Test Mode.

✦ Click the CONNECT button. The Communication Status area will show

the progress of the connection. WAIT UNTIL THE TIMEOUT TIMER BEGINS TO COUNT DOWN BEFORE PROCEEDING.

✦ As the timeout timer counts down, PRESS THE EMERGENCY

BUTTON ON THE CONSOLE.

CONNECTING REMOTELY ✦ Be sure that the modem’s LINE jack is connected to a working

telephone line.

✦ Verify that the Console’s T&R Terminals are connected to a working

telephone line.

✦ Click the CONNECT button. The Communications Status area will show

the progress of the connection. WAIT FOR THE CONNECTION TO COMPLETE. The RA-2400 will dial the number once, wait for a few rings, hang-up, then dial a second time. The Console should answer the telephone immediately when the telephone rings during the second dialing attempt. After connecting the Communications Status area will show the progress of the on-line connection, then display “Connected” and the DVS-2400 version number.

The Console Power area will show the status of the Console’s AC power and backup battery. The Arming Mode area will show the Console’s current mode. Pressing the REFRESH button will update the displayed information.

Local Connection in Progress Remote Connection in Progress

Linear Digital Video Recorder (DVS-2408) — 5.3 CONNECTING TO A CONSOLE (CONTINUED) diagram (page 43)
Fig. 33
Linear Digital Video Recorder (DVS-2408) — 5.3 CONNECTING TO A CONSOLE (CONTINUED) diagram (page 43)
Fig. 34
Page 44 of the Linear Digital Video Recorder (DVS-2408) user manual — SPECIAL NOTES:
Page 44 · click to enlarge
Page 44

5.4 SENDING DATA

Linear Digital Video Recorder (DVS-2408) — 5.4 SENDING DATA diagram (page 44)
Fig. 35

SEND BUTTON

For transferring data from an Account Profi le to a DVS-2400 Console.

☞ CAUTION: Receiving the data from the Console will overwrite the data in the Account Profi le. If you have made changes to the Account Profi le, save the profi le, then send the profi le to the Console before receiving the data into the profi le. This leaves previously learned sensor information unchanged. If this is a new Account Profi le, its OK to receive the Console data into the new profi le.

SENDING ✦ Click the SEND DATA TO CONSOLE button. The Communications Status

area will indicate the progress and show if the data was sent to the Console successfully.

SPECIAL NOTES:

You can make changes to the Account Profi le while the Console is connected. Be sure to send any changes to the Console before disconnecting. Minimize the Send/Receive window or slide it out of the way before editing the Account Profi le. There is a time limit to the connection. The Console will automatically disconnect after three minutes of inactivity.

Page 45 of the Linear Digital Video Recorder (DVS-2408) user manual — RECEIVE BUTTON
Page 45 · click to enlarge
Page 45

5.5 RECEIVING DATA

Linear Digital Video Recorder (DVS-2408) — 5.5 RECEIVING DATA diagram (page 45)
Fig. 36

RECEIVE BUTTON

For transferring data from a DVS-2400 Console to an Account Profi le.

☞ CAUTION: Receiving the data from the Console will overwrite the data in the Account Profi le.

RECEIVING ✦ Click the RECEIVE DATA FROM CONSOLE button. The Communications

Status area will indicate the progress and show if the data was received from the Console successfully.

Page 46 of the Linear Digital Video Recorder (DVS-2408) user manual — MODE SELECTION BUTTONS
Page 46 · click to enlarge
Page 46

5.6 CHANGING THE CONSOLE’S MODE

MODE SELECTION BUTTONS

To remotely view and change the operating mode of the Console.

ARMING MODE ✦ View the current operating mode of the Console in the ARMING

MODE display area.

✦ To change the current operating mode of the Console, select the

desired mode button (OFF, CHIME, HOME, or AWAY) in the ARMING MODE display area.

☞ NOTE: Test Mode and Learn Mode can only be selected directly from the Console’s keypad.

Page 47 of the Linear Digital Video Recorder (DVS-2408) user manual — DISCONNECT BUTTON
Page 47 · click to enlarge
Page 47

5.7 DISCONNECTING FROM THE CONSOLE

DISCONNECT BUTTON

To end the programming session and disconnect the modem from the Console.

DISCONNECTING ✦ When fi nished communicating with the Console, click on the

DISCONNECT button. The Communications Status area will show Not Connected when the Console has been disconnected.

Page 48 of the Linear Digital Video Recorder (DVS-2408) user manual — IMPORTANT:
Page 48 · click to enlarge
Page 48

5.8 CLOSING RA-2400

Linear Digital Video Recorder (DVS-2408) — 5.8 CLOSING RA-2400 diagram (page 48)
Fig. 37

EXIT COMMAND

To save the active Account Profi le(s) and quit the RA-2400 program.

✦ From the FILE menu, choose EXIT.

✦ To save while exiting, in the SAVE CHANGES? window click YES.

If the active Account Profi le is the default template, select a location and new name for the fi le and click SAVE. If the active Account Profi le already has a custom fi le name, it will be saved with the same name.

☞ NOTE: If more than one Account Profi le template is open and has been changed, additional SAVE CHANGES? windows will appear.

IMPORTANT:

AFTER ANY PROGRAMMING CHANGES ARE MADE TO A CONSOLE, PERFORM THROUGH TESTING TO VERIFY THAT THE CONSOLE OPERATES AS INTENDED.

Copyright © 2002 Linear Corporation 217473 C

Ask about the Linear Digital Video Recorder (DVS-2408)

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Linear Digital Video Recorder (DVS-2408)

Be the first to ask — other owners or our team will answer.

Original document

Linear Digital Video Recorder (DVS-2408) manual PDF

48 pages·891 KB·Digital Video Recorder·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…