Instruction/ maintenance manual of the product 841101 Life Fitness
Go to page of 14
841 101 WEIGHT ST ACK OPTION CLASS H P AR T # 6754401 REV . A V ersion: 841101 Revision: 06/19/01 1 ASSEMBL Y INSTRUCTIONS.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the Parabody 841 101 WEIGHT ST ACK OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 P A R TS LIST PA R T # 6750803 6753703 6274402 6275302 6609002 6610402 6750503 6176201 6754501 6189501 31 16101 31 16201 6284501 6714601 6758701 6577701 6542402 3103102 3108002 6595201 31 17401 6467.
4 FIGURE 2 STEP 2: • SECUREL Y assemble the LOW ROW A TT ACHMENT (5) and the UPRIGHT (1) to the POWER RACK using two 3/8 X 3-1/4” BOL TS (27), four 3/8” W ASHERS (31), and two 3/8” LOCK NUTS (32).
5 FIGURE 4 • Insert two WEIGHT PLA TE BUSHINGS (42) into the “P ARABODY” side of each of the twenty WEIGHT PLA TES (43) as shown in FIGURE 4. STEP 4 43 42 FIGURE 3 STEP 3 • Slide one 2” SQ. COVER CAP (22) over the end of the WEIGHT ST ACK BASE (7 ) as shown in FIGURE 3.
6 • Insert four CAP PLUGS (21) into the bottom end & top end of the two GUIDE RODS (9) as shown in FIGURE 5. STEP 5: FIGURE 5 9 31 23 3/8 X 1-1/4” 13 43 10 21 7 19 14 21 • Insert two GUIDE RODS (9) into the WEIGHT ST ACK BASE (7) as shown on FIGURE 5.
7 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECUREL Y assemble two 3-1/2” PULLEYS (12) to the TO P BOOM (2) using two 3/8 X 2-3/4” BOL TS (25), four 3/8” FLANGE SP ACERS (33), and two 3/8” LOCK NUTS (32). See FIGURE 6. (NOTE: BEFORE TIGHTENING , MAKE SURE CABLE (15) IS IN THE GROOVES OF THE PULLEYS.
8 STEP 8: FIGURE 8 • SECUREL Y assemble two 3-1/2” PULLEYS (12) to the TO P BOOM (2) using two 3/8 X 2-3/4” BOL TS (25), four 3/8” FLANGE SP ACERS (33), and two 3/8” LOCK NUTS (32). See FIGURE 8. (NOTE: BEFORE TIGHTENING , MAKE SURE CABLE (15) IS IN THE GROOVES OF THE PULLEYS.
9 STEP 9: FIGURE 9 • Swing the GUIDE RODS (9) under the T OP BOOM (2) as shown on FIGURE 9. • Assemble the TO P BOOM (2) over the GUIDE RODS (9) and SECUREL Y assemble the T OP BOOM (2) to the UPRIGHT (1) using two 1/2 X 3” BOL TS (28), two 1/2” W ASHERS (29), and one 1/2” LOCK NUT (30).
10 FIGURE 10 STEP 10: 3/8 X 2-3/4” 25 • Loop the ball end of the LOW ROW CABLE (16) around one 4-1/2” PULLEY (11) and SECUREL Y assemble the 4-1/2” PUL- LEY (1 1) to the UPRIGHT (1) using two 3/8 X 2-3/4” BOL TS (25), two 3/8” FLANGE SP ACERS (33), two 3/8” W ASHERS (31), and two 3/8” LOCKNUTS (32).
11 FIGURE 1 1 STEP 1 1: • Route the threaded end of the LOW ROW CABLE (16) around the bottom PULLEY of the PULLEY & PLA TE ASSEMBL Y (17) as shown in FIGURE 11 .
12 STEP 13: FIGURE 13 • Attach the LA T BAR (4) to the ball end of the LA T CABLE (15) using one 5/16” SNAP LINK (40) as shown in FIGURE 13.. • Attach the LOW ROW BAR (3) to the ball end of the LOW ROW CABLE (16) using two SNAP LINKS (40) and one 12 LINK CHAIN (41) as shown in FIGURE 14.
FIGURE 15 STEP 15: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 16 STEP 16: • When performing the LA T PULL exercise, insert the KNEE SUPPOR T (6) into the hole of the SAFETY RAIL as shown in FIG- URE 16 and simply lower the SAFETY RAIL down until roller pads contact knees.
14 STEP 17: FIGURE 17 • If upon completion of assembly , the HEAD PLA TE (14) does not sit on top of the first WEIGHT PLA TE (43), push the HEAD PLA TE (14) down, insert the WEIGHT ST ACK PIN (39) and perform several repetitions at the press station.
An important point after buying a device Life Fitness 841101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 841101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 841101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 841101 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 841101 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 841101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 841101.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 841101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 841101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
