Instruction/ maintenance manual of the product 8225 Life Fitness
Go to page of 16
8225 BICEP/TRICEP MACHINE Part # 6845001 Revision:11/2/99 1 ASSEMBLY INSTRUCTIONS.
IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8225 BICEP/TRICEP MACHINE. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 PARTS LIST PART # 6846003 6845503 6845103 6777703 6845303 6845703 6847002 6489902 6851401 6851501 6851901 6852001 3116101 6791102 6782301 6852301 6852601 3102917 3102953 3102901 KEY 1 2 3 4 5 6 7 8 .
STEP 1: FIGURE 1 • LOOSELY assemble the BASE (1) to the TOWER (3) using two 1/2 X 4 ” BOLTS (18), two 1/2 ” WASHERS (24), and two 1/2 ” LOCK NUTS (26) as shown in FIGURE 1.
• LOOSELY assemble the UPRIGHT (5) to the BASE (1) using four 1/2 X 4 ” BOLTS (18), two 1/2 ” WASHERS (24), and four 1/2 ” LOCK NUTS (26) as shown in FIGURE 2.
• LOOSELY assemble the TOP BOOM (2) to the TOWER (3) and the UPRIGHT (5) using four 1/2 X 4 ” BOLTS (18), four 1/2 ” WASHERS (24), and three 1/2 ” LOCK NUTS (26) as shown in FIGURE 4.
STEP 6: FIGURE 6 7 STEP 7: FIGURE 7 25 16 • SECURELY assemble SEAT PAD (16) to the PAD SUPPORT (7) using two 3/8 X 1- 1/4 ” BOLTS (21) and two 3/8 ” WASHERS (25) as shown in FIGURE 6. • Pull back on SPRING PIN and slide PAD SUPPORT (7) over square tube on SEAT SUPPORT (6) as shown in FIGURE 7.
8 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 8: FIGURE 8 STEP 9: FIGURE 9 • Snap two WEIGHT PLATE BUSHINGS (37) into the top of all fifteen WEIGHT PLATES (35) as shown in FIGURE 9. 37 35 • SECURELY assemble ARM PAD (17) to the BASE (1) using four 3/8 X 1-1/4 ” BOLTS (20) and four 3/8 ” WASHERS (25) as shown in FIGURE 8.
• Insert the two GUIDE RODS (15) into the base of the TOWER (3) as shown in FIGURE 10. Lubricate the GUIDE RODS (15) with a slicon or teflon spray that is available at most hardware stores. STEP 10 • Slide two WEIGHT STACK CUSHIONS (36) down over the GUIDE RODS (15).
STEP 11: FIGURE 11 • Place TOWER BRACE (4) over the GUIDE RODS (15) as shown and SECURE LY assemble TOWER BRACE (4) to the TOWER (3) using two 1/2 X 4 ” BOLTS (18), two 1/2 ” W ASHERS (24), and two 1/2 ” LOCK NUTS (26) as shown in FIGURE 11.
• Route threaded end of the TRICEP CABLE (12) around pulleys in TOP BOOM (2) and PULLEY BLOCK ASSEMB LY . Route TRICEP CABLE (12) down through hole in TOWER BRACE (7) as shown in FIGURE 13.
12 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Screw the treaded end of the TRICEP CABLE (12) approximately 1 ” into the end of theWEIGHT STACK SHAFT (32) of the HEAD PL A TE (33) and tighten jam nut securely.
13 • Route the threaded end of the ARM CURL CABLE (11) through the UPRIGHT (5) as shown, then SE- CURE LY assemble one 4-1/2 ” PULLEY (13) to the UPRIGHT (4) and over the top of the cable using two 3/8 X 2-3/4 ” BOLTS (22), two 3/8 ” FLANGE S PACERS (28), two 3/8 ” W ASHERS (25), and two 3/8 ” LOCKNUTS (27).
14 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 17: FIGURE 17 • Screw the threaded end of the ARM CURL CABLE (11) into threaded housing on the base of BASE (1) and tighten jam nut securely. 1 11 3 14 • Slide the SHROUD (14) between the TOWER (3) as shown in FIGURE 17.
15 STEP 18: FIGURE 18 • SECURE LY assemble the SHROUD (14) to the TOWER (63) using four 3/8 X 1 ” BUTTON HEAD CAP SCREWS (23) as shown in FIGURE 18.
16 FIGURE 19 • Attach ARM CURL BAR (9) & TRICEP ROPE (10) to ball ends of cables using two 5/16 ” SNAP HOOKS (30). See FIGURE 19. • If the HEAD PL ATE (33) does not sit on top of the first WEIGHT PL ATE (35), push the head plate down, insert the SELECTOR PIN (34) and perform several repetitions on the machine.
An important point after buying a device Life Fitness 8225 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 8225 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 8225 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 8225 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 8225 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 8225, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 8225.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 8225. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 8225 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
