Instruction/ maintenance manual of the product N2311AZ-BF LG
Go to page of 42
ww w .lg.c om O WNER'S MANU AL NET W ORK MONIT OR N2311AZ Please r ead the safe t y inf ormation carefully bef or e using the product . Net w ork Monitor Model English.
2 ENG English T able of Contents T ABLE OF CONTENTS 3 ASSEMBLING AND PREP ARING 3 Unpacking 4 Parts and buttons 6 Lifting and moving the Monitor 6 Setting Up the Monitor set 6 - Attaching the Stand Ba.
3 ENG English ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product.
4 ENG English ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is of f Front Side Buttons Input Connectors (See p.
5 ENG English ASSEMBLING AND PREP ARING Button Description MENU Activates the main menu. OSD Lock/Unlock Functions Locks/unlocks the OSD screen. y T o lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked.
6 ENG English ASSEMBLING AND PREP ARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y T o protect the sc reen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base.
7 ENG English ASSEMBLING AND PREP ARING Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience.
8 ENG English ASSEMBLING AND PREP ARING U s i n g t h e K e n s i n g t o n l o c k i n g device The connector for the Kensington lock is located on the rear of the monitor . For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www .
9 ENG English ASSEMBLING AND PREP ARING Detaching the stand body 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver , remove the four screws and detach the stand from the monitor .
10 ENG English ASSEMBLING AND PREP ARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 356 degrees and adjust the angle of the Monitor set to suit your view . 1 Lift the monitor to its highest height to utilize the Pivot function.
11 ENG English ASSEMBLING AND PREP ARING 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach W all mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.
12 ENG English ASSEMBLING AND PREP ARING y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury .
13 ENG English USING THE MONITOR SET USING THE MONIT OR SET C o n n e c t i n g I n p u t S i g n a l C a b l e y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer , without having to reconfigure anything or install any manual drivers.
14 ENG English USING THE MONITOR SET DVI connection - PCoIP T ransfers video signals to another monitor . Con- nect the monitor using the DVI cable as illustrated below . It is used for the expansion or replication of PCoIP mode screen. y T o connect the monitor to a computer , use the appropriate signal cable (LAN and D- SUB).
15 ENG English USING THE MONITOR SET C o n n e c t i n g L A N / P e r i p h e r a l s LAN connection - PCoIP The LAN connection transmits PCoIP signals to the monitor . Connect the router or switch to the monitor using a LAN cable as illustrated below .
16 ENG English USING THE MONITOR SET y Peripheral devices are sold separately . y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible.
17 ENG English USING THE MONITOR SET y What is "Self Image Adjustment"? This func- tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display .
18 ENG English CUSTOMIZING SETTINGS CUST OMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 T o change the settings of the selected item press the buttons on the front of the monitor .
19 ENG English CUSTOMIZING SETTINGS MENU Settings Picture 1 Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor .
20 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description COLOR TEMP ● ● Allows PRESET or USER to be selected. W ARM Sets the screen color to a reddish tone. MEDIUM Sets the screen color between the reddish and bluish tone. COOL Sets the screen color to a bluish tone.
21 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description HORIZONT AL ● x Moves the display area left or right. VERTICAL ● x Moves the display area up or down. CLOCK ● x If vertical lines are shown on the screen, adjust the frequency to mini- mize the lines and adjust the screen's horizontal width.
22 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description LANGUAGE ● ● Sets the menu screen to the desired language. PCoIP ● ● Allows the PCoIP to be turned ON or OFF . If PCoIP is ON If you switch to D-SUB input, PCoIP continues to be turned on.
23 ENG English CUSTOMIZING SETTINGS 1 Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. 2 Press the AUTO button to automatically adjust the screen. 3 Select EXIT to leave the OSD menu. T o return to the upper menu or set other menu items, use the up arrow ( ) button.
2 4 ENG English T roubleshooting TROUBLESHOOTING Nothing is displayed on the screen I s t he mo n it o r' s p o we r c o rd pl u gg e d i n? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator .
25 ENG English T roubleshooting The image is displayed abnormally . Does the display area appear un- centered? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen exhibit vertical lines? Pressing the AUTO button will automatically optimize the screen to the current display mode.
26 ENG English Specications PRODUCT SPECIFICA TION LCD Screen T ype 58.42 cm (23 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.
27 ENG English Product Specication Preset Mode Display Modes (Resolution) Horizontal Frequency (kHz) V ertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.
28 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. T ake a 10-minute break every hour .
29 ENG English Using PCoIP Solution U S I N G P C O I P S O L U T I O N Selecting the Connect button initiates a PCoIP or RDP session depending on the session settings. While the PCoIP connection is pending, the OSD local GUI will display a "Connection Pending" message.
30 ENG English Using PCoIP Solution Figure 2-5. OSD Options Menu Configuration Window In the Configuration window , the administrator can access the window tabs that contain the settings to configure and manage the portal environment.
31 ENG English Using PCoIP Solution Figure 2-7. Label Configuration Label T ab The Label tab allows the administrator or host to add customized information to the portal. y The portal label parameters can also be con- figured using the Webpage Administration Interface.
32 ENG English Using PCoIP Solution Fi gur e 2-8 . C on nec tio n Man age me nt Con fi gur ati on T able 2-1 Connection Manager Method Connection Management T ab The Connection Management tab allows the user to enable or disable the connection man- agement and specify the connection manager's IP address.
33 ENG English Using PCoIP Solution T able 2-2. Peer ID Method y Enable Discovery If the Enable Discovery option is selected, a device will use SLP Discovery to dynamically locate the peer devic e without requirin g any information about the location of the device in the network.
34 ENG English Using PCoIP Solution y Resolution The Resolution field is used to set the RDP screen resolution. The available values are as follows. y Native Resolution y 800x600 y 1024x768 y 1280x768.
35 ENG English Using PCoIP Solution y Screen-Saver Timeout The Screen-Saver T imeout field allows the ad- ministrator to set a time limit for the screen saver . The time limit is defined in seconds. The maximum time is 9999 seconds. If it is set to 0 seconds, the screen saver will be turned off.
36 ENG English Using PCoIP Solution y Enable VMware View The Enable VMware View option allows the user to configure the portal to use the VMware View Con- nection Server . y Identify Connection Server by The Identify Connection Server by selector allows the administrator to decide whether to identify the connection manager by IP address or by FQDN.
37 ENG English Using PCoIP Solution y View Event Log Message The View Event Log Message field displays the log messages accom panied by the timestamp inf orma - tion. The following two buttons are available: y Refresh The Refresh button refreshes the displayed event log messages.
38 ENG English Using PCoIP Solution y Ping Settings y Destination The IP address or FQDN to perform the ping test. y Interval The interval between the ping packets. y Packet Size The size of the ping packet. y Packets y Sent The number of ping packets sent.
39 ENG English Using PCoIP Solution y VPD Information The Vital Product Data (VPD) is information that uniquely identifies each portal or host. y MAC Address The portal MAC address y Unique Identifier.
40 ENG English Using PCoIP Solution y Mouse Speed The Mouse Speed field allows the user to set the portal's mouse cursor speed. y Keyboard Repeat Delay The Keyboard Repeat Delay field allows the user to set the portal's keyboard repeat delay .
41 ENG English Using PCoIP Solution y Minimum Image Quality The Minimum Image Quality slider allows the ad- ministrator to make compromises between image quality and frame rate when network bandwidth is limited.
MODEL SERIAL Mak e sur e t o re ad the Saf et y Pre caution s bef ore using the pr oduct . K eep the Owner ’s Manual ( CD ) in an a cces sible place f or f uture r ef erenc e. The mo del and s erial num ber of th e SET is locat ed on t he back a nd one sid e of the SET .
An important point after buying a device LG N2311AZ-BF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG N2311AZ-BF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG N2311AZ-BF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG N2311AZ-BF you will learn all the available features of the product, as well as information on its operation. The information that you get LG N2311AZ-BF will certainly help you make a decision on the purchase.
If you already are a holder of LG N2311AZ-BF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG N2311AZ-BF.
However, one of the most important roles played by the user manual is to help in solving problems with LG N2311AZ-BF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG N2311AZ-BF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
