Instruction/ maintenance manual of the product WM-343 Impex
Go to page of 11
COMPETITOR WM - 343 BENCH IMPEX INC. 14777 Don Julian Rd., City of Industry, CA 91746 Tel: (800) 999 - 8899 Fax (626) 961 - 9966 www.impex - fit ness.com info@impex - fitness.
TABLE OF CONTENTS BEFORE YOU BEGIN...............................................................................................1 IMP ORTANT SAFETY NOTICE................................................................................2 HARDWARE IDENTIFIER.
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble o r operate your machine.
3.
ASSEMBLY INSTRUCTION Tools required to assembly the machine: Two Adjustable Wrenches STEP 1 (SEE Diagram 1) A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#25) in the Mid - span.
STEP 2 (SEE DIAGRAM 2) A.) Connect the Front Stabilizer (#49) to the Main Seat Support (#32) and secure them with two M10 x 1” Bolts (#42), four ∅ 7/8” Washers (#13), and two M10 Aircraft Nuts (#15).
STEP 3 (SEE DIAGRAM 3) A.) Attach a ∅ 7/8” Washer (#13) onto a M10 x 4 ½” Bolt (#24). Insert the Bolt through the Butterfly (#22). Place a M10 Regular Nut onto the Bolt. Then insert the Bolt through the hole on the Rear Upright Beam (#1). Sec ure the Bolt with a Knob (#11) behind the Upright Beam.
STEP 4 (SEE DIAGRAM 4) A.) Attach the hole - side of the Backrest Supports (#28) onto both ends of the Pivot on the Main Seat Support (#32). The other side rest against the Backrest Adjustment Bar (#10). B.) Place the Backrest Board (#33) onto the Backrest Support (#28).
.
PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Rear Upright Beam 2 2 Right Bar Catch 1 3 Curl Bar 1 4 Spring Clip 3 5 ∅ ∅ 1” Curl Bar Flat End Cap 2 6 Left Bar Catch 1 7 Bar Catch Panel 2 8 7/8” Fl.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") w arrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser.
An important point after buying a device Impex WM-343 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex WM-343 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex WM-343 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex WM-343 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex WM-343 will certainly help you make a decision on the purchase.
If you already are a holder of Impex WM-343, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex WM-343.
However, one of the most important roles played by the user manual is to help in solving problems with Impex WM-343. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex WM-343 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
