Instruction/ maintenance manual of the product PWR 6 Impex
Go to page of 21
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model PWR 6 Retain This Manual for Reference 06-30-03 OWNER'S MANUAL POWERHOUSE CLUB PWR 6 IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
HA RDWA RE PA CK 3.
HA RDWA RE PA CK 4.
A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach the Main Fram e (#1) to the Front & Rear Stabilizers (#2 & 3).
STEP 2 (See Diagram 2) A.) Attach f our Bushings ( #27) to a Seat Support Fr ame (#6). B.) Attach a Backrest Support (#7) to the rear of the Seat Support Fr ame (#6). Ali gn the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42).
STEP 3 (See Diagram 3) A.) Place the Backrest Board (#14) onto the Backrest Suppor ts (#7). Secure i t wi th four M8 x 2” Al len Bolts ( #40) and ∅ 5/8” W ashers (#43). B.) Place the Seat Pad (#13) onto the Seat Support Frames (#6) . Secure it w ith four M8 x 2” Allen Bol ts (#40) and ∅ 5/8” W ashers (#43).
STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it with an Ax le (#17), two M 10 x ¾ ” Allen Bol ts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame.
STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#15) to the Ar m Curl Stand ( #4). Secure it with tw o M8 x 5/8” Allen Bolts ( #41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm Cur l Stand into the front opening on the M ain Frame (#1) . Use the Lock Knob to hold the desir ed Arm Curl height.
STEP 6 (See Diagram 6) A.) Attach an Upright Beam (#49) to a Floor Stabilizer (#47). Secure it w ith tw o M10 x 2 3/4” Carri age Bolts ( #81), ∅ ¾” W ashers (#42), and M10 Ai rcraft Nuts (#44). D o not tighten the nuts and bolts yet. B.) Attach the upper end of Left Support (#50) to the Upr ight Beam.
STEP 7 (See Diagram 7) A.) Attach the Front Vertical Frame (#54) to the Rear Stabilizer (#53). Secure it wi th two M10 x 5/8” Allen Bolts ( #88) and ∅ ¾” W ashers (#42). Do not tig hten all the nuts and bolts yet. B.) Attach the Cross Br ace (#48) to the Left & Rig ht Supports (#50 & 51).
STEP 8 (See Diagram 8) A.) Slide the Sl iding W eight Post (#56) onto the Rear Vert ical Frame ( #52). Slide the Sl iding Pulley Bracket (#57) onto the Fr ont Vertical Frame (#54). U se a Lock Knob (#23) to hol d the Sliding Pu lley Bracket in p osition.
CABLE LOOP DIAGRAM 13.
STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach the 100” Upper Cable (#68) to the opening on the front U pper Frame (#55) . Make sure the ball stopper of the Cable is under the Fr ame.
STEP 10 (See Diagram10 & Cable Loop Diagram) A.) Attach the 268” Lower Cabl e (#69) to the Sli ding Pull ey Bracket ( #57). Attach two Small Pulley s (#71) to the Brackets. Secure them w ith two M10 x 1 ¾ ” Allen Bolts (#86), four ∅ ¾” W ashers (#42), and tw o M10 Aircraft Nuts (#44).
DIAGRAM 10 16.
17.
18.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 51 Right Suppor t 1 2 Front Stabilizer 1 52 Rear Vertical Fr am e 1 3 Rear Stabilizer 1 53 Rear Stabilizer 1 4 Arm Curl St and 1 54 Front Vert ical.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be fr ee from def ects in work m anship and m ater ial, under norm al use and service conditions, for a period of two y ear s on the Fram e from the date of purc hase.
An important point after buying a device Impex PWR 6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex PWR 6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex PWR 6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex PWR 6 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex PWR 6 will certainly help you make a decision on the purchase.
If you already are a holder of Impex PWR 6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex PWR 6.
However, one of the most important roles played by the user manual is to help in solving problems with Impex PWR 6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex PWR 6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
