Instruction/ maintenance manual of the product MWM-7300 Impex
Go to page of 26
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model MWM-7300 Retain This Manual for Reference 09-15-08 OWNER'S MANUAL MARCY HOME GYM MWM-7300 IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFET Y NOTICE...................................................................……….. 2 HARDW ARE PACK……….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
WA RNI NG LABEL REPLA CEMENT The w arnin g labels show n here h ave been p laced on t he Base Frame and Upp er Frame. If the lab els are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location shown.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 4.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 5.
A SSEMBLY INSTRUCTION Tools Required for A ssembling the Machine: Tw o Adj ustable Wrenches, two Allen Wrenches, and one Philips Screw driver. NOTE: It is strongly recommended that this machine to be assembled by tw o or more people to avoid possible injury .
DIAGRAM 1 7.
STEP 2 (See Diagram 2) A.) Sl ide tw o Ø 2 ½” x 1” Rubber Bumpers (#65) onto the Gui de Rods (#18). Attach the two Guide R ods onto the W eight Stack Frame (#17). Secure the bottom of Guide Rods w ith tw o M10x 1” Allen Bol ts (#82) and tw o Ø ¾” W ashers (#91).
DIAGRAM 2 9.
STEP 3 (See Diagram 3) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Low er Cross Brace (#16) to the W e ight Stack Frame (#17). Secure them w ith two M10 x 3 1/8” Carri age Bolts ( #72), one 5 1/8” x 1 5/8” Bracket (#58), two Ø ¾ ” W ashers (#91), and two M 10 Aircraft Nuts ( #94).
DIAGRAM 3 11.
STEP 4 (See Diagram 4) A.) Attach the Rig ht & Lef t Seat Swiv el Frame (#13) & (#14) to M ain Base Frame (#1) from each side. Secure them together wi th one M12 x 7 7/8” Allen Bol t (#74), tw o Ø 1” W asher (#90), and one M12 Airc raft Nut (#93).
CABLE LOOP DIAGRAM 13.
STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 205” Upper C able (#35) to the openi ng at the front of the Upper Frame (#5). Note: The Ball Stopper on the cable need to be underneath the Frame. B.) Attach a Pulley (#51) to the opening .
DIAGRAM 5 15.
STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach the 118” Low er Cable ( #36) to the opening on the bottom of the Leg Devel oper (#10) . B.) Attach a Pulley (#51) to the opening . Secure it with one M10 x 3 3/8” Allen Bolt (#78), tw o Ø ¾” (#91), and one M10 Air craft Nut (#94).
DIAGRAM 6 17.
STEP 7 (See Diagram 7) A.) Attach the Fr ont W e ight Stack Cover (#29) to the W e ight Stack Frame (#17). Secure it with six M6 x 2 ½” Philips Screws (#89) and six Cov e r Spacers (#54). B.) R epeat the Procedure A to instal l the Rear W eight Stack Cov er (#30) to the other side.
STEP 8 (See Diagram 8) A.) Attach the Backr est Board (#34) to Fr ont Vertical Frame (#2). Secur e it wi th two M 8 x 2 1/8” Allen Bol ts (#85) and tw o Ø 5/8” W ashers (#92). B.) Attach the Seat Pad to Seat Suppor t (#11). Secur e it wi th two M 8 x 2 1/8” Al len Bolts (#85) and tw o Ø 5/8” W ashers (#92).
DIAGRAM 8 20.
STEP 9 (See Diagram 9) A.) Attach the Fr ont Press (#6) to the Fr ont Press Base (#5). Secur e it w ith one 8 ¾” Long Axle ( #57), tw o Ø ¾” W ashers (#91), and tw o M10 Aircr a f t Nuts (#94). Do not ov er tighten the N uts. Make sure the Front Press is able to swivel smoothly .
22.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base Fram e 1 2 Front Vertic al Fram e 1 3 Rear Vertical F ram e 1 4 Upper Fram e 1 5 Front Pres s Base 1 6 Front Pres s 1 7 Foot Plate 1 8 Leg Press F ram.
MWM-7300 WEIGHT RESISTANCE CHART WEIGHT PLA TE Station 1 2 3 4 5 6 7 8 9 Lat Pull 10 20 30 40 50 60 70 80 90 Front Press 15 26 37 48 59 70 81 92 103 Low Pulley 10 20 30 40 50 60 70 80 90 Leg Dev elope.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warr ants this produc t to be fr ee from def ects in work m anship and mater ial, under norm al use and ser vice conditions, f or a period of two y ears on the Fram e from the date of purc hase.
An important point after buying a device Impex MWM-7300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MWM-7300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MWM-7300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MWM-7300 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MWM-7300 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MWM-7300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MWM-7300.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MWM-7300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MWM-7300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
