Instruction/ maintenance manual of the product MWB-4360 Impex
Go to page of 33
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MWB-4360 Retain This Manual for Reference 07-14-06 OWNER'S MANUAL MARCY ® SMITH MACHINE MWB-4360 IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN..................................................................……………. 1 IMPORTANT SAFETY NOTICES.................................................................… 2 SMITH MACHINE HARDW ARE PACK….....
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
WA RNI NG LABEL PLA CEMENT The w arning labels show n here have been placed on the Rear Base, Rear Stabiliz er, and Upper Frame. If the labels are missing or illegible, please call customer serv ice at 1-800-888- 8899 for replacements. A pply the labels in the location s hown.
SMITH MA CHINE HA RDWA RE PA CK 4.
SMITH MA CHINE HA RDWA RE PA CK 5.
SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach a Fr ont Vertical Frame (#3) to the R ight Base Frame ( #1). Secure it w ith two M10 x 3” Carr iage Bolt s (#76), one 5 1/8” x 2 ¾” Bracket (#34), tw o Ø ¾” W ashers (#66), and two M10 Ai rcraft Nuts (#86) .
DIAGRAM 2 8.
STEP 3 (See Diagram 3) A.) Attach the R ear Vertic al Beam (#6) to the top of the Cross Br ace (#2). Attach the W eight Glide Base (#8) to the Cross Brace from the Bottom. Ali gn the holes. Secur e them wi th two M 10 x 3” C arriag e Bolts (#76), Ø ¾” W ashers (#66), and M10 Air craft Nuts (#86).
STEP 4 (See Diagram 4) A.) Attach the W eight Gli de Post (#7) onto the W eight Glide Base (#8) . Secure it w ith f our M10 x 1” C arriag e Bolts (#74), Ø ¾” W ashers (#66) and M10 Air craft Nuts (#86). B.) Sl ide the Slidi ng W eight Post (#14) onto the Chr o med Post from the top.
STEP 5 (See Diagram 5) A. Place the Left Upper Frame ( #94) onto the Front Top Beam (#15). Secur e it w ith two M 10 x 3 1/8” Carr iage Bolt s (#77), one 5 1/8” x 2” Bracket (#35), tw o Ø ¾” W ashers (#66), and tw o M10 Aircr aft Nuts (#86).
STEP 6 (See Diagram 6) A.) Secur ely ti ghten all N uts and Bolts prev iously installed. B.) Attach the Butter fly Base (#12) to the front of Rear Vertical Beam (#6). Attach the Butterfly Pulley Bracket (#13) to the back of the Rear Vertical Beam. Al ign the hol es.
CABLE LOOP DIAGRAM 13.
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one end of 87” Butter fly Cabl e (#42) to the cli p on Right Butter f ly (#11) . Draw the Cable to the right Sw ivel Pulley Bracket (#20).
STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Un-instal l the M10 x 1 1/8” All en Bolt (#104) and M 10 Aircr aft Nut (#86) on the U- shaped Connector on one end of the 229” Cable ( 41). Remove the U-shaped C onnector, Big W asher, and Ball Stopper from the Cable.
16.
STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach one end of the 138” Sl iding W eight Post Cabl e (#102) to the open bracket on the Sliding W eight Post (#14) . Secure it with one M10 x 1” Allen Bolt (#68), tw o Ø ¾” W ashers (#66), and one M10 Ai rcraft Nut ( #86).
DIAGRAM 9 18.
STEP 10 (See Diagram 10) A.) Attach the 59” Lower Cable (#40) to a Pulley (#57). Attach the Pull ey to the l ower openi ng on the Rear Verti cal Beam (#6) . Secure it w ith the Foot Plate (#16), one M10 x 3 3/8” Allen Bolt (#73), tw o Ø ¾” W ashers (#66), and one M 10 Aircr aft Nut (#86).
STEP 11 (See Diagram 11) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Li fting Sleeve ( #27) in betw een the two Safety Stop Frames (#26).
EXPLODED DIAGRAM 21.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Fram e 2 55 Sliding Sleeve 8 2 Cross Br ace 1 56 Lock Ring 2 3 Front Vertic al Beam 2 57 Pulley 10 4 Left Vertic al Fram e 1 58 Ø 1 ¾” Rubber Bum per 1.
MULTI-PURPOSE BENCH HA RDWA RE PA CK 23.
MULTI-PURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach four Bushi ngs (#27) to a Seat Support Frame (#6) . B.) Attach a Backr est Support (#7) to the rear of the Seat Support Frame (#6) . Alig n the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42).
STEP 3 (See Diagram 3) A.) Pl ace the Backrest Board (#14) onto the Backrest Supports (#7) . Secure it with four M8 x 2” Allen Bolts ( #40) and ∅ 5/8” W ashers (#43). B.) Pl ace the Seat Pad (#13) onto the Seat Support Fr ames (#6). Secure it wi th four M8 x 2” Allen Bol ts (#40) and ∅ 5/8” W ashers (#43).
STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it w ith an Axle ( #17), tw o M10 x ¾ ” Allen Bolts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame.
STEP 5 (See Diagram 5) A.) Attach the Ar m Curl Pad ( #15) to the Arm C url Stand (#4) . Secure it w ith two M8 x 5/8” Allen Bolts (#41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm C url Stand into the front openi ng on the Main Frame ( #1). Use the Lock Knob to hol d the desired Arm C url heig ht.
29.
MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Curl Stand 1 5 Leg Devel oper 1 6 Seat Support Frame 2 7 Backrest Support 2 8 Sl.
MWB-4360 WEIGHT RESISTANCE CHART Station Ratio Example Low Pulley 200% 10 lb. plate creates 20 lb. resistance Lat Pull 50% 10 lb. plate creates 5 lb. resistance Butterfly (both arms) 100% 10 lb. plate creates 10 lb. resistance Left Cross-Over 50% 10 lb.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree f rom defec ts in work m anship and m aterial, under nor ma l use and service conditions, for a period of two years on the Fram e fr om the date of purc hase.
An important point after buying a device Impex MWB-4360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MWB-4360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MWB-4360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MWB-4360 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MWB-4360 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MWB-4360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MWB-4360.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MWB-4360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MWB-4360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
