Instruction/ maintenance manual of the product MP-PWR10.0 Impex
Go to page of 21
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MP-PWR10.0 Retain This Manual for Reference 04-08-05 OWNER'S MANUAL MARCY PLATINUM MP-PWR 10.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
HA RDWA RE PA CK 3.
HA RDWA RE PA CK 4.
HA RDWA RE PA CK 5.
A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach the Main Fram e (#27) to the Bench Front & Rear Stabilizers (#28 & 29).
STEP 2 (See Diagram 2) A.) Attach the two side-holes on bottom of Backrest Supports ( #30) to the piv ot on the Main Frame (#27). Secur e it w ith one M12 x 5 ¾” Al len Bolt (#75) , two Ø 1” W ashers (#68), and one M12 Airc raft Nut (#71).
STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#33) to the open bracket on the M ain Frame (#27) . Secure it with one M 10 x 3 1/8” Allen Bolt ( #76), tw o Ø ¾” W ashers (#69), and one M10 Ai rcraft Nut (#72). D o not over ti ghten the bolt and nut, make sur e Leg Dev eloper is able to swiv el.
STEP 4 (See Diagram 4) A.) Attach the Arm Curl Pad (#37) to the Ar m Curl Stand ( #32). Secure it with tw o M8 x ¾” Allen Bolts ( #84) and tw o ∅ ¾” W ashers (#70). Insert the Arm C url Stand into the front opening on the Mai n Frame (#27) and secure it w ith a Lock Knob (#61) to hold it at the desired heig ht.
STEP 5 (See Diagram 5) A.) Note: Do not tig hten the Nuts and Bolts until i nstructed to do so. B.) Attach the top of Left Support (#2) to an Uprig ht Beam (#1). Secur e it wi th two M 10 x 5/8” Allen Bolts ( #82) and Ø ¾” W ashers (#69). C.) Attach the Left Floor Stabilizer (#4) to the Uprig h t Beam .
STEP 6 (See Diagram 6) A.) Attach the Rear Vertical Fr ame (#9) onto the Rear Base (#8). Secure i t wi th two M 10 x 2 ½” Carri age Bolts ( #74), Ø ¾” W a shers (#69), and M10 Aircr aft Nuts (#72). B.) Attach the Rear Base (#8) and Front Vertical Frame (#10) to the Rear Stabilizer (#7).
DIAGRAM 6 12.
CABLE LOOP DIAGRAM 13.
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach the 113 7/8” Upper Cable (#24) to the front opening on the U pper Frame (#11) . Make sure the ball stopper of the Cable is underneath the Fr ame.
STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Attach the 58 1/8” Low er Cable ( #25) to the low er opening on the bottom of Front Vertical Frame (#10). Attach a Pul ley ( #45) to the opening and secure it w ith one M10 x 2 3/8” Allen Bolt ( #78), tw o ½” Pull ey Bushi ngs (#66) , and one M10 Airc raft Nut (#72).
STEP 9 (See Diagram 9) A.) Attach a W eight Post (#20) to the Rig ht Support (#3). Secure it w ith a M10 x ¾” Al len Bolt (#81) and Ø ¾” W asher (#69). Slide an Oly m pic Sleeve (#44) onto the Post. Repeat the same procedure to instal l the other side.
17.
RACK EXPLODED DIAGRAM 18.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Uprig ht Beam 2 51 1 ¾” Sq uare End Cap 5 2 Left Suppor t 1 52 2” Squar e End Cap 2 3 Right Suppor t 1 53 Ø ½” Bushing 2 4 Left Floor St abilizer 1 54 .
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be fr ee from def ects in work m anship and m ater ial, under norm al use and service conditions, for a period of two y ear s on the Fram e from the date of purc hase.
An important point after buying a device Impex MP-PWR10.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MP-PWR10.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MP-PWR10.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MP-PWR10.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MP-PWR10.0 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MP-PWR10.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MP-PWR10.0.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MP-PWR10.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MP-PWR10.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
