Instruction/ maintenance manual of the product DBR 90 Impex
Go to page of 11
NOTE: Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model DBR 90 Retain This Manual for Reference 06 - 25 - 01 OWNER'S MANUAL P OWERHOUSE Bi - Level Dumbbell Rack DBR 90 IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD.
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE IDENTIFIER.....….....
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine.
3.
ASSEMBLY INSTRUCTION Tools Required to Assemble the Machine: Two Adju stable Wrenches NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left Upright Beam (#3) to the Stabilizer (#1).
STEP 2 (See Diagram 2) A.) Connect the two Uprights with one Fix ed Rack (#4) on the top level. Align the holes then Secure them with two M10 x 2 ¾” Carriage Bolts (#11), ∅ ¾” Washers (#12), and M10 Aircraft Nuts (#13) on each end of the Rack.
STEP 3 (See Diagram 3) A.) Connect the two Uprights with one Fixed Rack (#4) on the lower level. Align the holes then Secure them with two M10 x 2 ¾” Carriage Bolts (#11), ∅ ¾” Washers (#12), and M10 Aircraft Nuts (#13) on each end of the Rack.
STEP 4 (See Diagram 4) A.) Insert a Weight Plate Holders (#6) into the hole on the side of the Left Upright Beam. Secure it with a M10 x ¾” Allen Bolt (#9) and ∅ ¾” Washer (#12). B.) Slide an Olympic Sleeve (#16) onto the Holder. Attach a Spring Clip (#14) onto the Holder.
8.
Parts list KEY NO. DESCRI PTION Q’ty 1 Stabilizer 2 2 Right Upright Beam 1 3 Left Upright Beam 1 4 Fixed Rack 2 5 Adjustable Rack 2 6 Weight Plate Holder 4 7 Bracket 2 8 Square End Cap 8 9 M10 x ¾.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser.
An important point after buying a device Impex DBR 90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex DBR 90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex DBR 90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex DBR 90 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex DBR 90 will certainly help you make a decision on the purchase.
If you already are a holder of Impex DBR 90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex DBR 90.
However, one of the most important roles played by the user manual is to help in solving problems with Impex DBR 90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex DBR 90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
