Instruction/ maintenance manual of the product OGA-341 Henny Penny
Go to page of 22
Model OFE/OFG/OEA/OGA-341, 342 3-1. OPERATING COMPONENTS Reference Figure 3-1. C1000 CONTROLS Fig. Item Description Function No. No. 3-1 1 Digital Display Shows the shortening temperature, the timer c.
Model OFE/OFG/OEA/OGA-341, 342 Figure 3-1 3-2 408 1 4 3 3 2 2 6 4 7 5 8 9.
Model OFE/OFG/OEA/OGA-341, 342 3-2. OPERATING CONTROLS This section provides operating procedures for the Henny 12 BUTTON CONTROLS Penny 340 series open fryer with 12 button timer controls. Read sections 1, 2, and 3, and all instructions before operating the fryer.
Model OFE/OFG/OEA/OGA-341, 342 3-2. OPERATING CONTROLS- 12 BUTTON CONTROLS (Continued) Fig. Item Description Function No. No. 3-2 8 Used to access the Program Modes; once in the Program Mode, it is us.
Model OFE/OFG/OEA/OGA-341, 342 12 1 2 3 4 5 6 7 12 8 9 10 9 11 Figure 3-2 903 3-5.
Model OFE/OFG/OEA/OGA-341, 342 3-3. FILLING OR ADDING SHORTENING The shortening level must always be above the heating elements when the fryer is heating and at the frypot level indicators on the rear of the frypot. Failure to follow these instructions could result in a fire and/or damage to the fryer.
Model OFE/OFG/OEA/OGA-341, 342 The Computron 1000 controls are available on both split electronic controls frypot and full frypot fryers. The following is a brief description of the operating procedures for fry ers with these controls. 1. Be sure the drain valve is in the closed position.
Model OFE/OFG/OEA/OGA-341, 342 Do not overload, or place product with extreme moisture content into the basket. 18 lbs. (8.2 kgs.) is the maximum amount of product per frypot. Failure to follow these directions can result in shortening overflowing the frypot.
Model OFE/OFG/OEA/OGA-341, 342 Special Programming is used to set the item s below: Fahrenheit or Celsius Initialize System Lock or Unlock Controls Fryer Type – Open or Pressure .
Model OFE/OFG/OEA/OGA-341, 342 3-7. BASIC OPERATIONS The Henny Penny open fryers are available with 12 product AND PROCEDURES - button controls. Also, models OEA/OGA are available with (12 Button Controls/Autolift) 12 button controls with auto-lif t features.
Model OFE/OFG/OEA/OGA-341, 342 3-7. BASIC OPERATIONS AND PROCEDURES- (12 Button Controls/Autolift) The two separate timer controls (left and right), can be Continued) programmed entirely independent from each other for 2 half baskets, or as one timer for a single, full sized basket.
Model OFE/OFG/OEA/OGA-341, 342 3-7. BASIC OPERATIONS AND PROCEDURES- (12 Button Controls/Autolift) To load product directly into the shortening on Auto-lift (Continued) fryers, lower empty basket(s) into the shortening by pressing , load with product, then press the product button to start the Cook Cy cle.
Model OFE/OFG/OEA/OGA-341, 342 3-8. CARE OF SHORTENING FOLLOW THE INSTRUCTIONS BELOW TO AVOID SHORTENING OVERFLOWING THE FRYPOT, WHICH COULD RESULT IN SERIOUS BURNS, PERSONAL INJURY, FIRE, AND/OR PROPERTY DAMAGE. 1. Maintain the shortening at the proper cooking level.
Model OFE/OFG/OEA/OGA-341, 342 3-9. FILTERING 1. Turn the main switch to the off position. Remove OF SHORTENING and clean the fry basket in soap and water. Rinse thoroughly. DRA IN VALVE HA NDLE Best results are obtained when shortening is filtered at the normal frying temperature.
Model OFE/OFG/OEA/OGA-341, 342 3-9. FILTERING OF 6. Rinse the frypot as follows: SHORTENING a. Close the drain valve. (Continued) b. Position return line over empty frypot. Figure 3-8. c. Move the pump switch to the pum p position. d. Fill the frypot 1/3 full, then turn off pump.
Model OFE/OFG/OEA/OGA-341, 342 3-9. FILTERING OF SHORTENING (Continued) About 10 to 12 filterings can be made with one filter paper envelope, depending on: • the quantity and type of product fried a.
Model OFE/OFG/OEA/OGA-341, 342 3-12. CHANGING THE FILTER Change the filter envelope after 10-12 filterings or ENVELOPE whenever it becomes clogged with crumbs. Proceed as follows: The filter union could be hot. Wear protective glove or cloth, or severe burns could result.
Model OFE/OFG/OEA/OGA-341, 342 3-12. CHANGING THE FILTER ENVELOPE (Continued) 11. Fold the corners in and then double fold the open end. 12. Clam p the envelope in place with the two filter retaining clips. 13. Replace the crum b catcher screen on top of the filter paper.
Model OFE/OFG/OEA/OGA-341, 342 3-13. CLEANING 3. Close the drain valve. Discard the shortening in the THE FRYPOT(S) filter pan using the shortening shuttle. Then install the (Continued) filter drain under the fryer, leaving out the filter screen assembly.
Model OFE/OFG/OEA/OGA-341, 342 3-13. CLEANING 11. Add approximately 8 ozs. (0.24 liters) of distilled THE FRYPOT(S) vinegar. Use the Clean-Out Mode (see section 3-14), or (Continued) bring the solution back up to 195 ° F (90.5 ° C). 12. Using a clean brush, scrub the interior of frypot.
Model OFE/OFG/OEA/OGA-341, 342 3-15. LIGHTING AND 1. Turn the power switch to the OFF position. SHUTDOWN OF THE BURNERS 2. Rotate the gas valve knob clockwise to the OFF position and wait at least five(5) minutes before continuing to the next step. 3.
Model OFE/OFG/OEA/OGA-341, 342 3-17. REGULAR MAINTENANCE As in all food service equipment, the Henny Penny open fryer requires care and proper maintenance. The table below provides a summary of scheduled m aintenance procedures to be performed by the operator.
An important point after buying a device Henny Penny OGA-341 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny OGA-341 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny OGA-341 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny OGA-341 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny OGA-341 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny OGA-341, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny OGA-341.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny OGA-341. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny OGA-341 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
