Instruction/ maintenance manual of the product OFE-341 Henny Penny
Go to page of 8
Model OFE/OFG/OEA/OGA-341, 342 2-1. INTRODUCTION This section provides the installation instructions for the Henny Penny open fryer. Installation of the unit should be preformed only by a qualified service technician. Do not puncture the unit with any objects such as drills or screws as component damage or electrical shock could result.
Model OFE/OFG/OEA/OGA-341, 342 2-3. SELECTING THE Proper location of the open fryer is very important for LOCATION operation, speed, and convenience. Locate the open fryer to allow clearances for servicing and proper operation. Choose a location which provides easy loading and unloading without interfering with the final assembly of food orders.
Model OFE/OFG/OEA/OGA-341, 342 2-5. VENTILATION OF FRYER (Continued) When installing the gas fry station do not attach an extension to the gas fl ue exhaust stack. This may impair proper operation of the burner, causing malfunctions and possible negative back draft.
Model OFE/OFG/OEA/OGA-341, 342 603 2-4.
Model OFE/OFG/OEA/OGA-341, 342 2-6. GAS SUPPLY • A standard one inch, black steel pipe and malleable fit- (Continued) tings should be used for gas service connections. • Do not use cast iron fittings. • Although 1 inch (2.54 cm) sized pipe is recommend for 2 wells and 3/4 inch (1.
Model OFE/OFG/OEA/OGA-341, 342 2-7. GAS LEAK TEST Prior to turning the gas supply on, be sure the gas valve knob on the gas control valve is in the OFF position. Upon initial installation, and after moving the unit, the piping and fittings should be checked for gas leaks.
Model OFE/OFG/OEA/OGA-341, 342 2-9. ELECTRICAL REQUIREMENTS OFG/OGA-340 SERIES (Continued) To avoid electrical shock, do not disconnect the ground (earth) plug.
Model OFE/OFG/OEA/OGA-341, 342 2-11 ADDITIONAL CE ELECTRICAL STATEMENTS The supply power cords shall be oil-resistant, sheathed flexible cable, no lighter than ordinary polychloroprene or other equivalent synthetic elastomer-sheathed cord.
An important point after buying a device Henny Penny OFE-341 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny OFE-341 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny OFE-341 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny OFE-341 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny OFE-341 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny OFE-341, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny OFE-341.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny OFE-341. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny OFE-341 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
