Instruction/ maintenance manual of the product 561 Henny Penny
Go to page of 3
Model 500/561/600 Power switch ON but fryer completely inoperative Pressure not exhausting at end of cook cycle Operating pressure too high 4-1. TROUBLESHOOTING GUIDE Problem Cause Correction • Open.
Model 500/561/600 4-2. ERROR CODES In the event of a control system failure, the digital display will show an “Error Message.” These messages are coded: “E4”, “E5”, “E6”, “E10”, “E15”, “E20”, “E31”, “E41”, “E46”, “E54”, and E-70-A & B.
Model 500/561/600 DISPLA Y CAUSE P ANEL BOARD CORRECTION “E-41”, Programming T urn switch to OFF , then back to ON; if display shows any “E-46” failure o f the error codes, try to reinitialize.
An important point after buying a device Henny Penny 561 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny 561 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny 561 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny 561 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny 561 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny 561, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny 561.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny 561. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny 561 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
