Instruction/ maintenance manual of the product HRTL71706.0 Healthrider
Go to page of 28
Serial Number Decal M odel No. HRTL71706.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction .
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 The decals shown here have been placed on the treadmill. If a decal is missing, or if it is illegible, call the toll-free tele- phone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.
5 T hank you for selecting the HEALTHRIDER ® P RO H 500i treadmill. The PRO H500i treadmill offers an im- pressive array of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique PRO H 500i tread mill can be folded up, requiring less than half the floor space of other treadmills.
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more sta - ble. Do not fully fold the Frame until the treadmill is completely assembled.
4. With the help of a second person, carefully raise the Uprights (84) to a vertical position. Have the second person hold the Handrail (20) near the Uprights (84). Inser t the Up right W ire Harness (77) into the hole in the bottom of the Handrail and out of the top as shown.
7. Set the console assembly on the Handrail (20). Be careful to avoid pinching any of the wires. Make sure that the ground wire (see step 5) and the wire from the console assembly (see step 6) are in the indicated channel. Hand tighten five Screws (3) into the Handrail (20) and the console assembly.
1. Remove the key from the console and unplug the power cord. Remove the Screw (3) and the Access Door (76) from the back of the Console Base (85). 2. Connect the wire on the receiver (A) to the indi- cated wire extending from the Console Base (85). Hold the receiver so the small cylinder is oriented as shown and is facing the Console Base.
10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 FEATURES OF THE CONSOLE The revolutionary treadmill console offers a selection of features designed to make your workouts more effective. When you select the manual mode of the console, you can c hange the speed and incline of the treadmill with the t ouch of a button.
12 HOW TO TURN ON THE POWER Plug in the power cord (see page 10). Locate the reset /off c ircuit breaker near the power cord. Make s ure that the circuit breaker is in the reset position.
13 The left side of the dis- play will show the e lapsed time, the dis- tance that you have w alked or run, and the incline level of the tread- mill. Note: When a program is selected, the dis- play will show the time remaining in the program instead of the elapsed time.
14 H OW TO USE A CROSS TRAINER PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. S elect one of the six cross trainer programs. To select a cross trainer program, press one of the three Programs buttons re- peatedly until “P 1,” “P 2,” “P 3,” “P 4,” “P 5,” or “P 6” appears in the display.
Perform the first strength exercise when prompted. When the first strength e xercise segment be- gins (only one indica- tor will flash in the Current Segment column), the walking belt will slow to a stop and the name of the first strength exercise will appear in the display for a few seconds.
16 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of treadmill usage information. The information m ode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
17 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- c ome permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
18 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down- ward until the frame and the footrail are past the latch pin. 2. Hold the metal frame firmly with both hands , and lower it to the floor.
19 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Locate the Reed Switch (63) and the Magnet (46) on the left side of the Pulley (47). Turn the Pulley until the M agnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the Reed S witch is about 1/8”. I f necessary, loosen the Screw (33), move the Reed Switch slightly, and then retig hten th e Scre w.
21 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
22 P ART LIST—Model No. HRTL71706.0 R0906A Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Decal 2 2 3/4" Screw 3 25 Screw 4 1 Reset/Off Circuit Breaker 5 10 Foot Rail Screw 6 2.
23 Key No. Qty. Description Key No. Qty. Description 93 1 Optic Disk 94 1 Photo Switch Nut 95 4 Hood Clip 96 1 Photo Switch 97 1 Photo Switch Bolt 9 8 2 Dumbbell 99 1 Latch Plate 1 00 4 Wire Tie 101 1.
16 9 12 1 1 15 10 46 47 10 49 48 58 53 29 52 3 17 12 15 55 1 1 69 7 1 1 6 6 70 70 5 5 5 5 5 5 5 5 5 5 9 51 29 53 54 3 2 2 7 7 90 90 99 3 91 91 24 EXPLODED DRA WING A—Model No.
63 59 7 106 105 41 33 38 39 40 66 28 28 32 32 36 18 87 25 22 27 30 23 26 19 24 22 25 23 30 42 7 7 33 4 13 43 45 101 50 95 95 95 33 33 104 61 33 106 106 25 EXPLODED DRA WING B—Model No.
84 73 82 83 82 83 68 68 72 32 86 88 56 103 83 60 65 65 31 32 44 8 6 4 21 20 32 33 80 67 89 81 78 80 67 89 81 78 44 31 32 92 8 103 92 8 8 77 8 60 62 62 3 3 3 3 14 14 8 64 8 83 93 94 66 96 97 3 3 3 3 3 8 3 77 102 33 57 33 26 EXPLODED DRA WING C—Model No.
3 76 79 75 33 74 71 34 85 3 3 3 98 37 35 35 33 3 100 33 27 EXPLODED DRA WING D—Model No. HRTL71706.0 R0906A.
Part No. 245010 R0906A Printed in USA © 2006 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire HealthRider H500i treadmill (“Product”) is warranted to be free of all defects in mate- rial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
An important point after buying a device Healthrider HRTL71706.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Healthrider HRTL71706.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Healthrider HRTL71706.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Healthrider HRTL71706.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Healthrider HRTL71706.0 will certainly help you make a decision on the purchase.
If you already are a holder of Healthrider HRTL71706.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Healthrider HRTL71706.0.
However, one of the most important roles played by the user manual is to help in solving problems with Healthrider HRTL71706.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Healthrider HRTL71706.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
