Instruction/ maintenance manual of the product HRTL61706.1 Healthrider
Go to page of 32
Serial Number Decal Model No. HRTL61706.1 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 The decals shown here have been placed on the treadmill. If a decal is missing, or if it is illegible, call the toll-free tele- phone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.
5 T hank you for selecting the revolutionary HealthRider ® P RO H450i treadmill. The PRO H450i treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective.
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (26) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled.
7 2. Slide a Front Endcap (80) onto the Base (81). Partially tighten a Endcap Screw (79) into the F ront Endcap and the base. S lide a Wheel Housing (86) onto the Base (81). Attach the Wheel Housing with a 1" Tek Screw (77) and a Base Pad (89) with a 1 1/4” Tek Screw (108) as shown.
8 5. With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (not s hown) to a vertical position. R emove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.
9 8. While a second person holds the console as- sembly near the Pulse Bar (66), connect the G round Wire (107) on the Pulse Bar to the ground wire from the console assembly. C onnec t the wire from the console assembly to the Upright Wire (75). Make sure to connect t he connectors properly (see the inset draw- ing).
10 12. See the inset drawing. Push the Uprights (70, 76) sideways so that the treadmill Frame (26) is centered between the Uprights. Firmly tighten the Upright Bolts (84, 85) on each side of the treadmill.
1 1 1. Remove the key from the console and unplug t he power cord. Remove the 3/4" Screw (23) and the Access Door (100) from the back of the Console Base (98). 2. Connect the wire on the receiver (A) to the indi- cated wire extending from the Console Base (98).
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
13 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button.
HOW TO TURN ON THE POWER Plug in the power cord (see page 12). Locate the reset /off c ircuit breaker near the power cord. Make s ure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 13) and slide the clip onto the waistband of your cloth es.
15 Follow your progress with the display. When the manual mode is se- l ected, the lower part of the display will show a 1/4-mile track. As you walk or run, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.
16 H OW TO USE A PRESET PROGRAM I nsert the key fully into the console. S ee HOW TO TURN ON THE POWER on page 14. Enter your weight if desired. See step 2 on page 14. Select one of the preset programs. To select one of the preset pro- grams, press the P5, P6, P7, or P8 button.
17 Follow your progress with the display. See step 6 on page 15. Measure your heart rate if desired. S ee step 7 on page 15. Turn on the fan if desired. See step 8 on page 15. When you are finished exercising, remove the key from the console. When the program has ended, make sure that the incline of the treadmill is at the lowest set- ting.
18 When only three seconds remain in the first seg- ment of t he pr ogram, both the Current Segment c olumn and the column to the right will flash and a series of tones will sound. If the speed and/or in- c line of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.
19 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of the total number of hours that the treadmill has b een operated and the total number of miles that the walking belt has moved.
20 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down- ward until the catch is past the latch pin. 2. Hold the metal frame firmly with both hands , and lower it to the floor.
22 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
With the help of a second person, carefully raise the Uprights (70, 76) as shown. Caref ully pi vot th e Hood ( 28) off. L ocate the Reed Switch (39) and the Magnet (6) on the left side of the Pulley (7). Turn the Pulley until the Magnet is aligned with the Reed Switch.
24 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
25 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
26 P ART LIST—Model No. HRTL61706.1 R 0107A To locate the parts listed below, see the EXPLODED DRAWING on pages 28 to 31. Key No. Qty. Description Key No.
27 Key No. Qty. Description Key No. Qty. Description 101 1 Console Fan 102 2 Fan Screw 103 1 Static Decal 104 1 Rear Roller 105 1 Controller Wire 1 06 1 Front Roller Nut 107 1 Console Ground Wire 108 .
3 17 10 9 4 5 6 7 5 16 15 26 20 21 22 27 10 4 24 9 14 1 1 1 1 8 8 2 2 2 2 2 2 2 2 2 18 17 104 21 20 25 18 19 19 2 12 12 23 23 1 1 1 1 72 72 28 EXPLODED DRA WING A—Model No.
41 40 44 37 43 11 41 40 39 38 35 36 33 30 31 46 34 29 60 59 59 58 61 35 30 45 32 11 49 50 28 11 11 53 54 52 51 51 55 57 56 54 54 51 59 82 13 11 47 105 23 23 48 59 59 106 29 EXPLODED DRA WING B—Model No.
64 64 65 89 77 89 77 89 77 78 41 80 59 78 41 79 79 75 87 88 86 86 87 88 109 90 91 41 92 93 61 94 95 73 74 62 62 68 67 67 23 71 69 52 52 23 66 23 23 23 63 80 89 77 83 84 85 83 85 84 76 70 81 63 78 41 65 42 97 75 59 1 07 69 42 108 108 30 EXPLODED DRA WING C—Model No.
96 102 101 102 23 23 23 23 23 103 100 98 23 99 31 EXPLODED DRA WING D—Model No. HRTL61706.1 R 0107A.
Part No. 252194 R0107A Printed in USA © 2007 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire HealthRider PRO H450i treadmill (“Product”) is warranted to be free of all defects in m aterial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
An important point after buying a device Healthrider HRTL61706.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Healthrider HRTL61706.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Healthrider HRTL61706.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Healthrider HRTL61706.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Healthrider HRTL61706.1 will certainly help you make a decision on the purchase.
If you already are a holder of Healthrider HRTL61706.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Healthrider HRTL61706.1.
However, one of the most important roles played by the user manual is to help in solving problems with Healthrider HRTL61706.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Healthrider HRTL61706.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
